Re: [PATCH 4/5] arm: dts: sun8i: a83t: Add support for the ir interface

[Maxime Ripard]

On Sun, Dec 17, 2017 at 11:45:46PM +0100, Philipp Rossak wrote:
> The ir interface is like on the H3 located at 0x01f02000 and is exactly
> the same. This patch adds support for the ir interface on the A83T.
> 
> Signed-off-by: Philipp Rossak <embed3d@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/sun8i-a83t.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> index 954c2393325f..9e7ed3b9a6b8 100644
> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> @@ -503,6 +503,16 @@
>  			#reset-cells = <1>;
>  		};
>  
> +		ir: ir@01f02000 {
> +			compatible = "allwinner,sun5i-a13-ir";
> +			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
> +			clock-names = "apb", "ir";
> +			resets = <&r_ccu RST_APB0_IR>;
> +			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> +			reg = <0x01f02000 0x40>;

The size should be the size of the whole memory block, not just the
registers you need.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature