Re: [PATCH 2/3] mmc: sdhci-pci-o2micro: Add eMMC HS200 support

[Adrian Hunter]

On 04/12/17 12:10, LinuxPatchCommit wrote:
> Dear all,

A greeting is not needed in a commit message.

> 
> Add register definition for eMMC HS200 mode.
> Add hardware tuning for eMMC HS200 mode.
> 
> Signed-off-by: ernest.zhang <ernest.zhang@xxxxxxxxxxxxxx>
> ---
>  drivers/mmc/host/sdhci-pci-o2micro.h | 3 +++

sdhci-pci-o2micro.h was removed by commit 361eeda0ca16 ("mmc: sdhci-pci:
Tidy o2micro definitions").  Please re-base.

>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-pci-o2micro.h b/drivers/mmc/host/sdhci-pci-o2micro.h
> index 770f53857211..3fb957729315 100644
> --- a/drivers/mmc/host/sdhci-pci-o2micro.h
> +++ b/drivers/mmc/host/sdhci-pci-o2micro.h
> @@ -49,6 +49,7 @@
>  #define O2_SD_MISC_CTRL4	0xFC
>  #define O2_SD_TUNING_CTRL	0x300
>  #define O2_SD_PLL_SETTING	0x304
> +#define O2_SD_MISC_SETTING	0x308
>  #define O2_SD_CLK_SETTING	0x328
>  #define O2_SD_CAP_REG2		0x330
>  #define O2_SD_CAP_REG0		0x334
> @@ -62,6 +63,8 @@
>  #define O2_SD_FREG4_ENABLE_CLK_SET	BIT(22)
>  
>  #define O2_SD_VENDOR_SETTING	0x110
> +#define O2_SD_HW_TUNING_ENABLE BIT(4)

Both these definitions are needed in patch 1.  It would be better to add
them in that patch.

> +
>  #define O2_SD_VENDOR_SETTING2	0x1C8
>  
>  extern int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot);
>