Re: [PATCH v7 5/6] arm: dts: mt2712: Add clock controller device nodes

From: Matthias Brugger
Date: Wed Dec 20 2017 - 13:03:31 EST




On 11/28/2017 08:28 AM, Weiyi Lu wrote:
> Add clock controller nodes for MT2712, include topckgen, infracfg,
> pericfg, mcucfg and apmixedsys. This patch also add six oscillators that
> provide clocks for MT2712.
>
> Signed-off-by: Weiyi Lu <weiyi.lu@xxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 115 ++++++++++++++++++++++++++++++
> 1 file changed, 115 insertions(+)

I fixed the subject line for you, but the next time please take care to start
the line with "arm64" instead of "arm"

Thanks,
Matthias

>
> diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> index 5d4e406..5703793 100644
> --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> @@ -5,6 +5,7 @@
> * SPDX-License-Identifier: (GPL-2.0 OR MIT)
> */
>
> +#include <dt-bindings/clock/mt2712-clk.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
>
> @@ -98,6 +99,48 @@
> #clock-cells = <0>;
> };
>
> + clk26m: oscillator@0 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <26000000>;
> + clock-output-names = "clk26m";
> + };
> +
> + clk32k: oscillator@1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "clk32k";
> + };
> +
> + clkfpc: oscillator@2 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <50000000>;
> + clock-output-names = "clkfpc";
> + };
> +
> + clkaud_ext_i_0: oscillator@3 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <6500000>;
> + clock-output-names = "clkaud_ext_i_0";
> + };
> +
> + clkaud_ext_i_1: oscillator@4 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <196608000>;
> + clock-output-names = "clkaud_ext_i_1";
> + };
> +
> + clkaud_ext_i_2: oscillator@5 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <180633600>;
> + clock-output-names = "clkaud_ext_i_2";
> + };
> +
> timer {
> compatible = "arm,armv8-timer";
> interrupt-parent = <&gic>;
> @@ -111,6 +154,24 @@
> (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>;
> };
>
> + topckgen: syscon@10000000 {
> + compatible = "mediatek,mt2712-topckgen", "syscon";
> + reg = <0 0x10000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + infracfg: syscon@10001000 {
> + compatible = "mediatek,mt2712-infracfg", "syscon";
> + reg = <0 0x10001000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + pericfg: syscon@10003000 {
> + compatible = "mediatek,mt2712-pericfg", "syscon";
> + reg = <0 0x10003000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> uart5: serial@1000f000 {
> compatible = "mediatek,mt2712-uart",
> "mediatek,mt6577-uart";
> @@ -121,6 +182,18 @@
> status = "disabled";
> };
>
> + apmixedsys: syscon@10209000 {
> + compatible = "mediatek,mt2712-apmixedsys", "syscon";
> + reg = <0 0x10209000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + mcucfg: syscon@10220000 {
> + compatible = "mediatek,mt2712-mcucfg", "syscon";
> + reg = <0 0x10220000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> sysirq: interrupt-controller@10220a80 {
> compatible = "mediatek,mt2712-sysirq",
> "mediatek,mt6577-sysirq";
> @@ -192,5 +265,47 @@
> clock-names = "baud", "bus";
> status = "disabled";
> };
> +
> + mfgcfg: syscon@13000000 {
> + compatible = "mediatek,mt2712-mfgcfg", "syscon";
> + reg = <0 0x13000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + mmsys: syscon@14000000 {
> + compatible = "mediatek,mt2712-mmsys", "syscon";
> + reg = <0 0x14000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + imgsys: syscon@15000000 {
> + compatible = "mediatek,mt2712-imgsys", "syscon";
> + reg = <0 0x15000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + bdpsys: syscon@15010000 {
> + compatible = "mediatek,mt2712-bdpsys", "syscon";
> + reg = <0 0x15010000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + vdecsys: syscon@16000000 {
> + compatible = "mediatek,mt2712-vdecsys", "syscon";
> + reg = <0 0x16000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + vencsys: syscon@18000000 {
> + compatible = "mediatek,mt2712-vencsys", "syscon";
> + reg = <0 0x18000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + jpgdecsys: syscon@19000000 {
> + compatible = "mediatek,mt2712-jpgdecsys", "syscon";
> + reg = <0 0x19000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> };
>
>