[PATCH 1/7] PM / OPP: Implement dev_pm_opp_of_add_table_indexed()

From: Viresh Kumar
Date: Fri Dec 22 2017 - 02:30:22 EST


The "operating-points-v2" property can contain a list of phandles now,
specifically for the power domain providers that provide multiple
domains.

Add support to parse that.

Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
drivers/opp/of.c | 50 +++++++++++++++++++++++++++++++++++++++++---------
include/linux/pm_opp.h | 6 ++++++
2 files changed, 47 insertions(+), 9 deletions(-)

diff --git a/drivers/opp/of.c b/drivers/opp/of.c
index cb716aa2f44b..22c9bd191f62 100644
--- a/drivers/opp/of.c
+++ b/drivers/opp/of.c
@@ -250,20 +250,17 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);

/* Returns opp descriptor node for a device node, caller must
* do of_node_put() */
-static struct device_node *_opp_of_get_opp_desc_node(struct device_node *np)
+static struct device_node *_opp_of_get_opp_desc_node(struct device_node *np,
+ int index)
{
- /*
- * There should be only ONE phandle present in "operating-points-v2"
- * property.
- */
-
- return of_parse_phandle(np, "operating-points-v2", 0);
+ /* "operating-points-v2" can be an array for power domain providers */
+ return of_parse_phandle(np, "operating-points-v2", index);
}

/* Returns opp descriptor node for a device, caller must do of_node_put() */
struct device_node *dev_pm_opp_of_get_opp_desc_node(struct device *dev)
{
- return _opp_of_get_opp_desc_node(dev->of_node);
+ return _opp_of_get_opp_desc_node(dev->of_node, 0);
}
EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_opp_desc_node);

@@ -509,6 +506,41 @@ int dev_pm_opp_of_add_table(struct device *dev)
}
EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table);

+/**
+ * dev_pm_opp_of_add_table_indexed() - Initialize indexed opp table from device tree
+ * @dev: device pointer used to lookup OPP table.
+ * @index: Index number.
+ *
+ * Register the initial OPP table with the OPP library for given device only
+ * using the "operating-points-v2" property.
+ *
+ * Return:
+ * 0 On success OR
+ * Duplicate OPPs (both freq and volt are same) and opp->available
+ * -EEXIST Freq are same and volt are different OR
+ * Duplicate OPPs (both freq and volt are same) and !opp->available
+ * -ENOMEM Memory allocation failure
+ * -ENODEV when 'operating-points' property is not found or is invalid data
+ * in device node.
+ * -ENODATA when empty 'operating-points' property is found
+ * -EINVAL when invalid entries are found in opp-v2 table
+ */
+int dev_pm_opp_of_add_table_indexed(struct device *dev, int index)
+{
+ struct device_node *opp_np;
+ int ret;
+
+ opp_np = _opp_of_get_opp_desc_node(dev->of_node, index);
+ if (!opp_np)
+ return -ENODEV;
+
+ ret = _of_add_opp_table_v2(dev, opp_np);
+ of_node_put(opp_np);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table_indexed);
+
/* CPU device specific helpers */

/**
@@ -613,7 +645,7 @@ int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev,
}

/* Get OPP descriptor node */
- tmp_np = _opp_of_get_opp_desc_node(cpu_np);
+ tmp_np = _opp_of_get_opp_desc_node(cpu_np, 0);
of_node_put(cpu_np);
if (!tmp_np) {
pr_err("%pOF: Couldn't find opp node\n", cpu_np);
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 6c2d2e88f066..f042fdeaaa3c 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -303,6 +303,7 @@ static inline void dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask

#if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
int dev_pm_opp_of_add_table(struct device *dev);
+int dev_pm_opp_of_add_table_indexed(struct device *dev, int index);
void dev_pm_opp_of_remove_table(struct device *dev);
int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask);
void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask);
@@ -314,6 +315,11 @@ static inline int dev_pm_opp_of_add_table(struct device *dev)
return -ENOTSUPP;
}

+static inline int dev_pm_opp_of_add_table_indexed(struct device *dev, int index)
+{
+ return -ENOTSUPP;
+}
+
static inline void dev_pm_opp_of_remove_table(struct device *dev)
{
}
--
2.15.0.194.g9af6a3dea062