[PATCH] hwmon: (sht3x) move sysfs documentation to Documentation/ABI
From: Aishwarya Pant
Date: Fri Dec 22 2017 - 12:26:18 EST
The sysfs documentation for sht3x devices should be with the rest of the
interfaces in Documentation/ABI. The motivation behind this is that
documentation should be where the user expects it to be, rather than
where the developer expects it to be.
ABI documentation requires a specific format and this is how the
information in it was filled-
What: sht3x is an i2c device so it would be connected to the
i2c bus
Date: from the commit date that introduced the attribute
KernelVersion: from the first stable version git tag that contains the
commit
Contact: module author(s)
Description: from Documentation/hwmon/sht3x
Signed-off-by: Aishwarya Pant <aishpant@xxxxxxxxx>
---
There are things that might be wrong here and I am unsure of-
1. Whether this file should be in stable or testing?
2. Contact information, full sysfs path etc
I am doing this is in an exercise to move sysfs documentation to its right
place and identify places where it might be missing. hwmon drivers seem to have
a quite nice documentation, but just not in the ABI format.
Documentation/ABI/stable/sysfs-bus-i2c-hwmon-sht3x | 128 +++++++++++++++++++++
Documentation/hwmon/sht3x | 25 ----
2 files changed, 128 insertions(+), 25 deletions(-)
create mode 100644 Documentation/ABI/stable/sysfs-bus-i2c-hwmon-sht3x
diff --git a/Documentation/ABI/stable/sysfs-bus-i2c-hwmon-sht3x b/Documentation/ABI/stable/sysfs-bus-i2c-hwmon-sht3x
new file mode 100644
index 000000000000..0e8355c625f5
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-i2c-hwmon-sht3x
@@ -0,0 +1,128 @@
+What: /sys/bus/i2c/devices/.../temp1_input
+Date: June 2016
+KernelVersion: 4.8
+Contact: David Frey <david.frey@xxxxxxxxxxxxx>,
+ Pascal Sachs <pascal.sachs@xxxxxxxxxxxxx>
+Description: (RO) Temperature input value
+ Unit: millidegree Celsius
+
+What: /sys/bus/i2c/devices/.../temp1_max
+Date: June 2016
+KernelVersion: 4.8
+Contact: David Frey <david.frey@xxxxxxxxxxxxx>,
+ Pascal Sachs <pascal.sachs@xxxxxxxxxxxxx>
+Description: (RW) Temperature max value.
+ Unit: millidegree Celsius
+
+What: /sys/bus/i2c/devices/.../temp1_max_hyst
+Date: June 2016
+KernelVersion: 4.8
+Contact: David Frey <david.frey@xxxxxxxxxxxxx>,
+ Pascal Sachs <pascal.sachs@xxxxxxxxxxxxx>
+Description: (RW) Temperature hysteresis value for max limit
+ Unit: millidegree Celsius
+
+What: /sys/bus/i2c/devices/.../temp1_min
+Date: June 2016
+KernelVersion: 4.8
+Contact: David Frey <david.frey@xxxxxxxxxxxxx>,
+ Pascal Sachs <pascal.sachs@xxxxxxxxxxxxx>
+Description: (RW) Temperature min value
+ Unit: millidegree Celsius
+
+What: /sys/bus/i2c/devices/.../temp1_min_hyst
+Date: June 2016
+KernelVersion: 4.8
+Contact: David Frey <david.frey@xxxxxxxxxxxxx>,
+ Pascal Sachs <pascal.sachs@xxxxxxxxxxxxx>
+Description: (RW) Temperature hysteresis value for min limit.
+ Unit: millidegree Celsius
+
+What: /sys/bus/i2c/devices/.../temp1_alarm
+Date: June 2016
+KernelVersion: 4.8
+Contact: David Frey <david.frey@xxxxxxxxxxxxx>,
+ Pascal Sachs <pascal.sachs@xxxxxxxxxxxxx>
+Description: (RO) Channel alarm
+ 0: no alarm
+ 1: alarm is set when the temperature is outside the configured
+ limits.
+ Only works in periodic measure mode
+
+What: /sys/bus/i2c/devices/.../humidity1_input
+Date: June 2016
+KernelVersion: 4.8
+Contact: David Frey <david.frey@xxxxxxxxxxxxx>,
+ Pascal Sachs <pascal.sachs@xxxxxxxxxxxxx>
+Description: (RO) humidity input
+ Unit: milli-percent
+
+What: /sys/bus/i2c/devices/.../humidity1_max
+Date: June 2016
+KernelVersion: 4.8
+Contact: David Frey <david.frey@xxxxxxxxxxxxx>,
+ Pascal Sachs <pascal.sachs@xxxxxxxxxxxxx>
+Description: (RW) humidity max value
+ Unit: milli-percent
+
+What: /sys/bus/i2c/devices/.../humidity1_max_hyst
+Date: June 2016
+KernelVersion: 4.8
+Contact: David Frey <david.frey@xxxxxxxxxxxxx>,
+ Pascal Sachs <pascal.sachs@xxxxxxxxxxxxx>
+Description: (RW) humidity hysteresis value for max limit
+ Unit: milli-percent
+
+What: /sys/bus/i2c/devices/.../humidity1_min
+Date: June 2016
+KernelVersion: 4.8
+Contact: David Frey <david.frey@xxxxxxxxxxxxx>,
+ Pascal Sachs <pascal.sachs@xxxxxxxxxxxxx>
+Description: (RW) humidity min value
+ Unit: milli-percent
+
+What: /sys/bus/i2c/devices/.../humidity1_min_hyst
+Date: June 2016
+KernelVersion: 4.8
+Contact: David Frey <david.frey@xxxxxxxxxxxxx>,
+ Pascal Sachs <pascal.sachs@xxxxxxxxxxxxx>
+Description: (RW) humidity hysteresis value for min limit
+ Unit: milli-percent
+
+What: /sys/bus/i2c/devices/.../humidity1_alarm
+Date: June 2016
+KernelVersion: 4.8
+Contact: David Frey <david.frey@xxxxxxxxxxxxx>,
+ Pascal Sachs <pascal.sachs@xxxxxxxxxxxxx>
+Description: (RO) humidity alarm
+ 0: no alarm
+ 1: alarm is set when the humidity is outside the configured
+ limits
+ Only works in periodic measure mode
+
+What: /sys/bus/i2c/devices/.../heater_enable
+Date: July 2016
+KernelVersion: 4.8
+Contact: David Frey <david.frey@xxxxxxxxxxxxx>,
+ Pascal Sachs <pascal.sachs@xxxxxxxxxxxxx>
+Description: (RW) Enable on-chip heater to remove excess humidity from sensor
+ 0: turned off
+ 1: turned on
+
+What: /sys/bus/i2c/devices/.../update_interval
+Date: June 2016
+KernelVersion: 4.8
+Contact: David Frey <david.frey@xxxxxxxxxxxxx>,
+ Pascal Sachs <pascal.sachs@xxxxxxxxxxxxx>
+Description: (RW) value is 0 for single shot, otherwise it is interval in
+ msec for periodic measurement.
+ The allowed update_interval in milliseconds are as follows:
+ * 0 single shot mode
+ * 2000 0.5 Hz periodic measurement
+ * 1000 1 Hz periodic measurement
+ * 500 2 Hz periodic measurement
+ * 250 4 Hz periodic measurement
+ * 100 10 Hz periodic measurement
+ If the interval is not supported by the sensor, the next faster
+ interval is chosen.
+ Unit: milliseconds
diff --git a/Documentation/hwmon/sht3x b/Documentation/hwmon/sht3x
index b0d88184f48e..744dc9b00e8b 100644
--- a/Documentation/hwmon/sht3x
+++ b/Documentation/hwmon/sht3x
@@ -49,28 +49,3 @@ the alert pin on the sensor is set to high.
When the temperature and humidity readings move back between the hysteresis
values, the alert bit is set to 0 and the alert pin on the sensor is set to
low.
-
-sysfs-Interface
----------------
-
-temp1_input: temperature input
-humidity1_input: humidity input
-temp1_max: temperature max value
-temp1_max_hyst: temperature hysteresis value for max limit
-humidity1_max: humidity max value
-humidity1_max_hyst: humidity hysteresis value for max limit
-temp1_min: temperature min value
-temp1_min_hyst: temperature hysteresis value for min limit
-humidity1_min: humidity min value
-humidity1_min_hyst: humidity hysteresis value for min limit
-temp1_alarm: alarm flag is set to 1 if the temperature is outside the
- configured limits. Alarm only works in periodic measure mode
-humidity1_alarm: alarm flag is set to 1 if the humidity is outside the
- configured limits. Alarm only works in periodic measure mode
-heater_enable: heater enable, heating element removes excess humidity from
- sensor
- 0: turned off
- 1: turned on
-update_interval: update interval, 0 for single shot, interval in msec
- for periodic measurement. If the interval is not supported
- by the sensor, the next faster interval is chosen
--
2.15.1