Re: [PATCH v2 1/2] dt-bindings: Document mti,mips-cpc binding

[Rob Herring]

On Thu, Dec 21, 2017 at 04:20:23PM +0100, Aleksandar Markovic wrote:
> From: Paul Burton <paul.burton@xxxxxxxx>
> 
> Document a binding for the MIPS Cluster Power Controller (CPC) which
> simply allows the device tree to specify where the CPC registers are
> located.
> 
> Signed-off-by: Paul Burton <paul.burton@xxxxxxxx>
> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@xxxxxxxx>
> ---
>  Documentation/devicetree/bindings/misc/mti,mips-cpc.txt | 8 ++++++++

power controllers are usually documented under bindings/power/

>  1 file changed, 8 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/misc/mti,mips-cpc.txt
> 
> diff --git a/Documentation/devicetree/bindings/misc/mti,mips-cpc.txt b/Documentation/devicetree/bindings/misc/mti,mips-cpc.txt
> new file mode 100644
> index 0000000..c6b8251
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/mti,mips-cpc.txt
> @@ -0,0 +1,8 @@
> +Binding for MIPS Cluster Power Controller (CPC).
> +
> +This binding allows a system to specify where the CPC registers are
> +located.
> +
> +Required properties:
> +compatible : Should be "mti,mips-cpc".
> +regs: Should describe the address & size of the CPC register region.
> -- 
> 2.7.4
>