[PATCH net-next 0/6] net: mvpp2: 1000BaseX and 2000BaseX support

[Antoine Tenart]

Hi all,

This series adds 1000BaseX and 2500BaseX support to the Marvell PPv2
driver. In order to use it, the 2.5 SGMII mode is added in the Marvell
common PHY driver (cp110-comphy).

Thanks to theses patches the fourth network interface can be used on the
mcbin, and two patches are attached: one to describe the interface in
the mcbin device tree, and another one adding Ethernet aliases now that
the four interfaces are described.

This was tested on a mcbin.

Patches 1 and 2 should go through the PHY tree, patches 3 and 4 through
the net-next tree and patches 5 and 6 through the mvebu one.

Please note the two mvpp2 patches do not conflict with the ACPI series
Marcin sent a few days ago, and the two series can be processed in
parallel. (Marcin is aware of me sending this series).

Thanks!
Antoine

Antoine Tenart (5):
  phy: add 2.5G SGMII mode to the phy_mode enum
  phy: cp110-comphy: 2.5G SGMII mode
  net: mvpp2: 1000baseX support
  net: mvpp2: 2500baseX support
  arm64: dts: marvell: mcbin: enable the fourth network interface

Yan Markman (1):
  arm64: dts: marvell: add Ethernet aliases

 arch/arm64/boot/dts/marvell/armada-7040-db.dts    |  6 ++
 arch/arm64/boot/dts/marvell/armada-8040-db.dts    |  7 +++
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 15 +++++
 drivers/net/ethernet/marvell/mvpp2.c              | 67 +++++++++++++++++++----
 drivers/phy/marvell/phy-mvebu-cp110-comphy.c      | 17 +++++-
 include/linux/phy/phy.h                           |  1 +
 6 files changed, 100 insertions(+), 13 deletions(-)

-- 
2.14.3