[PATCH 3.2 29/94] usb: renesas_usbhs: fix usbhsf_fifo_clear() for RX direction

[Ben Hutchings]

3.2.97-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>

commit 0a2ce62b61f2c76d0213edf4e37aaf54a8ddf295 upstream.

This patch fixes an issue that the usbhsf_fifo_clear() is possible
to cause 10 msec delay if the pipe is RX direction and empty because
the FRDY bit will never be set to 1 in such case.

Fixes: e8d548d54968 ("usb: renesas_usbhs: fifo became independent from pipe.")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
 drivers/usb/renesas_usbhs/fifo.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -263,8 +263,17 @@ static void usbhsf_fifo_clear(struct usb
 	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 	int ret = 0;
 
-	if (!usbhs_pipe_is_dcp(pipe))
-		ret = usbhsf_fifo_barrier(priv, fifo);
+	if (!usbhs_pipe_is_dcp(pipe)) {
+		/*
+		 * This driver checks the pipe condition first to avoid -EBUSY
+		 * from usbhsf_fifo_barrier() with about 10 msec delay in
+		 * the interrupt handler if the pipe is RX direction and empty.
+		 */
+		if (usbhs_pipe_is_dir_in(pipe))
+			ret = usbhs_pipe_is_accessible(pipe);
+		if (!ret)
+			ret = usbhsf_fifo_barrier(priv, fifo);
+	}
 
 	/*
 	 * if non-DCP pipe, this driver should set BCLR when