[PATCH net-next 1/2] net: dsa: lan9303: phy_addr_sel_strap rename and retype
From: Egil Hjelmeland
Date: Fri Dec 29 2017 - 07:39:17 EST
chip->phy_addr_sel_strap is declared as a bool, but is also used as an
integer address base.
Rename 'phy_addr_sel_strap' to 'phy_addr_base', and change type to int.
Signed-off-by: Egil Hjelmeland <privat@xxxxxxxxxxxxxxxxxx>
---
drivers/net/dsa/lan9303-core.c | 20 ++++++++++----------
include/linux/dsa/lan9303.h | 2 +-
2 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index 944901f03f8b..3088cdc5d205 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -479,7 +479,8 @@ static int lan9303_detect_phy_setup(struct lan9303 *chip)
{
int reg;
- /* depending on the 'phy_addr_sel_strap' setting, the three phys are
+ /* Calculate chip->phy_addr_base:
+ * Depending on the 'phy_addr_sel_strap' setting, the three phys are
* using IDs 0-1-2 or IDs 1-2-3. We cannot read back the
* 'phy_addr_sel_strap' setting directly, so we need a test, which
* configuration is active:
@@ -495,12 +496,12 @@ static int lan9303_detect_phy_setup(struct lan9303 *chip)
}
if ((reg != 0) && (reg != 0xffff))
- chip->phy_addr_sel_strap = 1;
+ chip->phy_addr_base = 1;
else
- chip->phy_addr_sel_strap = 0;
+ chip->phy_addr_base = 0;
dev_dbg(chip->dev, "Phy setup '%s' detected\n",
- chip->phy_addr_sel_strap ? "1-2-3" : "0-1-2");
+ chip->phy_addr_base ? "1-2-3" : "0-1-2");
return 0;
}
@@ -1019,7 +1020,7 @@ static int lan9303_get_sset_count(struct dsa_switch *ds)
static int lan9303_phy_read(struct dsa_switch *ds, int phy, int regnum)
{
struct lan9303 *chip = ds->priv;
- int phy_base = chip->phy_addr_sel_strap;
+ int phy_base = chip->phy_addr_base;
if (phy == phy_base)
return lan9303_virt_phy_reg_read(chip, regnum);
@@ -1033,7 +1034,7 @@ static int lan9303_phy_write(struct dsa_switch *ds, int phy, int regnum,
u16 val)
{
struct lan9303 *chip = ds->priv;
- int phy_base = chip->phy_addr_sel_strap;
+ int phy_base = chip->phy_addr_base;
if (phy == phy_base)
return lan9303_virt_phy_reg_write(chip, regnum, val);
@@ -1070,7 +1071,7 @@ static void lan9303_adjust_link(struct dsa_switch *ds, int port,
res = lan9303_phy_write(ds, port, MII_BMCR, ctl);
- if (port == chip->phy_addr_sel_strap) {
+ if (port == chip->phy_addr_base) {
/* Virtual Phy: Remove Turbo 200Mbit mode */
lan9303_read(chip->regmap, LAN9303_VIRT_SPECIAL_CTRL, &ctl);
@@ -1094,8 +1095,7 @@ static void lan9303_port_disable(struct dsa_switch *ds, int port,
struct lan9303 *chip = ds->priv;
lan9303_disable_processing_port(chip, port);
- lan9303_phy_write(ds, chip->phy_addr_sel_strap + port,
- MII_BMCR, BMCR_PDOWN);
+ lan9303_phy_write(ds, chip->phy_addr_base + port, MII_BMCR, BMCR_PDOWN);
}
static int lan9303_port_bridge_join(struct dsa_switch *ds, int port,
@@ -1289,7 +1289,7 @@ static int lan9303_register_switch(struct lan9303 *chip)
chip->ds->priv = chip;
chip->ds->ops = &lan9303_switch_ops;
- chip->ds->phys_mii_mask = chip->phy_addr_sel_strap ? 0xe : 0x7;
+ chip->ds->phys_mii_mask = chip->phy_addr_base ? 0xe : 0x7;
return dsa_register_switch(chip->ds);
}
diff --git a/include/linux/dsa/lan9303.h b/include/linux/dsa/lan9303.h
index b6514c29563f..b4f22112ba75 100644
--- a/include/linux/dsa/lan9303.h
+++ b/include/linux/dsa/lan9303.h
@@ -23,7 +23,7 @@ struct lan9303 {
struct regmap_irq_chip_data *irq_data;
struct gpio_desc *reset_gpio;
u32 reset_duration; /* in [ms] */
- bool phy_addr_sel_strap;
+ int phy_addr_base;
struct dsa_switch *ds;
struct mutex indirect_mutex; /* protect indexed register access */
struct mutex alr_mutex; /* protect ALR access */
--
2.14.1