[PATCH 5/6] clocksource: Add a new timer-ingenic driver

[Paul Cercueil]

This driver will use the TCU (Timer Counter Unit) present on the Ingenic
JZ47xx SoCs to provide the kernel with a clocksource and timers.

Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/timer/ingenic,tcu.txt      |  35 +++
 drivers/clocksource/Kconfig                        |   8 +
 drivers/clocksource/Makefile                       |   1 +
 drivers/clocksource/timer-ingenic.c                | 259 +++++++++++++++++++++
 4 files changed, 303 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/ingenic,tcu.txt
 create mode 100644 drivers/clocksource/timer-ingenic.c

diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
new file mode 100644
index 000000000000..e4944972ea53
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
@@ -0,0 +1,35 @@
+Ingenic JZ47xx SoCs Timer/Counter Unit driver
+---------------------------------------------
+
+Required properties:
+
+- compatible : should be "ingenic,<socname>-tcu". Valid strings are:
+  * ingenic,jz4740-tcu
+  * ingenic,jz4770-tcu
+  * ingenic,jz4780-tcu
+- interrupt-parent : phandle of the TCU interrupt controller.
+- interrupts : Specifies the interrupts the controller is connected to.
+- clocks : List of phandle & clock specifiers for the TCU clocks.
+- clock-names : List of name strings for the TCU clocks.
+- ingenic,channels: a list of TCU channels to be used as timers.
+
+Example:
+
+/ {
+	regmap {
+		compatible = "simple-mfd", "syscon";
+		reg = <0x10002000 0x1000>;
+
+		tcu: timer {
+			compatible = "ingenic,jz4740-tcu";
+
+			clocks = <&tcu 0>, <&tcu 1>;
+			clock-names = "timer0", "timer1";
+
+			interrupt-parent = <&tcu>;
+			interrupts = <0>, <1>;
+
+			ingenic,channels = <0>, <1>;
+		};
+	};
+};
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index c729a88007d0..7b6dedf0347d 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -583,4 +583,12 @@ config CLKSRC_ST_LPC
 	  Enable this option to use the Low Power controller timer
 	  as clocksource.
 
+config INGENIC_TIMER
+	bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
+	depends on MACH_INGENIC || COMPILE_TEST
+	select CLKSRC_OF
+	default y
+	help
+	  Support for the timer/counter unit of the Ingenic JZ SoCs.
+
 endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 72711f1491e3..607c7de07d02 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -73,5 +73,6 @@ obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
 obj-$(CONFIG_H8300_TMR8)		+= h8300_timer8.o
 obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
 obj-$(CONFIG_H8300_TPU)			+= h8300_tpu.o
+obj-$(CONFIG_INGENIC_TIMER)		+= timer-ingenic.o
 obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
 obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
diff --git a/drivers/clocksource/timer-ingenic.c b/drivers/clocksource/timer-ingenic.c
new file mode 100644
index 000000000000..2ec922e5fc0b
--- /dev/null
+++ b/drivers/clocksource/timer-ingenic.c
@@ -0,0 +1,259 @@
+/*
+ * Copyright (C) 2016 Paul Cercueil <paul@xxxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/ingenic-tcu.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define NUM_CHANNELS	8
+
+struct ingenic_tcu;
+
+struct ingenic_tcu_channel {
+	unsigned int idx;
+	struct clk *clk;
+};
+
+struct ingenic_tcu {
+	struct ingenic_tcu_channel channels[NUM_CHANNELS];
+	unsigned long requested;
+	struct regmap *map;
+};
+
+struct ingenic_clock_event_device {
+	struct clock_event_device cevt;
+	struct ingenic_tcu_channel *channel;
+	char name[32];
+};
+
+#define ingenic_cevt(_evt) \
+	container_of(_evt, struct ingenic_clock_event_device, cevt)
+
+static inline struct ingenic_tcu *to_ingenic_tcu(struct ingenic_tcu_channel *ch)
+{
+	return container_of(ch, struct ingenic_tcu, channels[ch->idx]);
+}
+
+static int ingenic_tcu_cevt_set_state_shutdown(struct clock_event_device *evt)
+{
+	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(evt);
+	struct ingenic_tcu_channel *channel = jzcevt->channel;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	unsigned int idx = channel->idx;
+
+	regmap_write(tcu->map, REG_TECR, BIT(idx));
+	return 0;
+}
+
+static int ingenic_tcu_cevt_set_next(unsigned long next,
+		struct clock_event_device *evt)
+{
+	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(evt);
+	struct ingenic_tcu_channel *channel = jzcevt->channel;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	unsigned int idx = channel->idx;
+
+	if (next > 0xffff)
+		return -EINVAL;
+
+	regmap_write(tcu->map, REG_TDFRc(idx), (unsigned int) next);
+	regmap_write(tcu->map, REG_TCNTc(idx), 0);
+	regmap_write(tcu->map, REG_TESR, BIT(idx));
+
+	return 0;
+}
+
+static irqreturn_t ingenic_tcu_cevt_cb(int irq, void *dev_id)
+{
+	struct clock_event_device *cevt = dev_id;
+	struct ingenic_clock_event_device *jzcevt = ingenic_cevt(cevt);
+	struct ingenic_tcu_channel *channel = jzcevt->channel;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	unsigned int idx = channel->idx;
+
+	regmap_write(tcu->map, REG_TECR, BIT(idx));
+
+	if (cevt->event_handler)
+		cevt->event_handler(cevt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init ingenic_tcu_req_channel(struct ingenic_tcu_channel *channel)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+	char buf[16];
+	int err;
+
+	if (test_and_set_bit(channel->idx, &tcu->requested))
+		return -EBUSY;
+
+	snprintf(buf, sizeof(buf), "timer%u", channel->idx);
+	channel->clk = clk_get(NULL, buf);
+	if (IS_ERR(channel->clk)) {
+		err = PTR_ERR(channel->clk);
+		goto out_release;
+	}
+
+	err = clk_prepare_enable(channel->clk);
+	if (err)
+		goto out_clk_put;
+
+	return 0;
+
+out_clk_put:
+	clk_put(channel->clk);
+out_release:
+	clear_bit(channel->idx, &tcu->requested);
+	return err;
+}
+
+static int __init ingenic_tcu_reset_channel(struct device_node *np,
+		struct ingenic_tcu_channel *channel)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+
+	return regmap_update_bits(tcu->map, REG_TCSRc(channel->idx),
+				0xffff & ~TCSR_RESERVED_BITS, 0);
+}
+
+static void __init ingenic_tcu_free_channel(struct ingenic_tcu_channel *channel)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(channel);
+
+	clk_disable_unprepare(channel->clk);
+	clk_put(channel->clk);
+	clear_bit(channel->idx, &tcu->requested);
+}
+
+static const char * const ingenic_tcu_timer_names[] = {
+	"TCU0", "TCU1", "TCU2", "TCU3", "TCU4", "TCU5", "TCU6", "TCU7",
+};
+
+static int __init ingenic_tcu_setup_cevt(struct device_node *np,
+		struct ingenic_tcu *tcu, unsigned int idx)
+{
+	struct ingenic_tcu_channel *channel = &tcu->channels[idx];
+	struct ingenic_clock_event_device *jzcevt;
+	unsigned long rate;
+	int err, virq;
+
+	err = ingenic_tcu_req_channel(channel);
+	if (err)
+		return err;
+
+	err = ingenic_tcu_reset_channel(np, channel);
+	if (err)
+		goto err_out_free_channel;
+
+	rate = clk_get_rate(channel->clk);
+	if (!rate) {
+		err = -EINVAL;
+		goto err_out_free_channel;
+	}
+
+	jzcevt = kzalloc(sizeof(*jzcevt), GFP_KERNEL);
+	if (!jzcevt) {
+		err = -ENOMEM;
+		goto err_out_free_channel;
+	}
+
+	virq = irq_of_parse_and_map(np, idx);
+	if (!virq) {
+		err = -EINVAL;
+		goto err_out_kfree_jzcevt;
+	}
+
+	err = request_irq(virq, ingenic_tcu_cevt_cb, IRQF_TIMER,
+			ingenic_tcu_timer_names[idx], &jzcevt->cevt);
+	if (err)
+		goto err_out_irq_dispose_mapping;
+
+	jzcevt->channel = channel;
+	snprintf(jzcevt->name, sizeof(jzcevt->name), "ingenic-tcu-chan%u",
+		 channel->idx);
+
+	jzcevt->cevt.cpumask = cpumask_of(smp_processor_id());
+	jzcevt->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
+	jzcevt->cevt.name = jzcevt->name;
+	jzcevt->cevt.rating = 200;
+	jzcevt->cevt.set_state_shutdown = ingenic_tcu_cevt_set_state_shutdown;
+	jzcevt->cevt.set_next_event = ingenic_tcu_cevt_set_next;
+
+	clockevents_config_and_register(&jzcevt->cevt, rate, 10, (1 << 16) - 1);
+
+	return 0;
+
+err_out_irq_dispose_mapping:
+	irq_dispose_mapping(virq);
+err_out_kfree_jzcevt:
+	kfree(jzcevt);
+err_out_free_channel:
+	ingenic_tcu_free_channel(channel);
+	return err;
+}
+
+static int __init ingenic_tcu_init(struct device_node *np)
+{
+	struct ingenic_tcu *tcu;
+	unsigned int i;
+	int err, num_timers;
+
+	num_timers = of_property_count_elems_of_size(np, "ingenic,channels", 4);
+	if (num_timers < 0) {
+		pr_err("timer-ingenic: Unable to read DTS node");
+		return num_timers;
+	}
+
+	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+	if (!tcu)
+		return -ENOMEM;
+
+	tcu->map = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(tcu->map)) {
+		err = PTR_ERR(tcu->map);
+		kfree(tcu);
+		return err;
+	}
+
+	for (i = 0; i < NUM_CHANNELS; i++)
+		tcu->channels[i].idx = i;
+
+	for (i = 0; i < (unsigned int) num_timers; i++) {
+		u32 channel;
+
+		of_property_read_u32_index(np, "ingenic,channels", i, &channel);
+
+		if (channel > NUM_CHANNELS) {
+			pr_warn("timer-ingenic: requested TCU channel %u does not exist\n",
+					channel);
+			continue;
+		}
+
+		err = ingenic_tcu_setup_cevt(np, tcu, channel);
+		if (err) {
+			pr_warn("timer-ingenic: Unable to init TCU channel %u: %i",
+					channel, err);
+			continue;
+		}
+	}
+
+	return 0;
+}
+
+CLOCKSOURCE_OF_DECLARE(jz4740_tcu, "ingenic,jz4740-tcu", ingenic_tcu_init);
+CLOCKSOURCE_OF_DECLARE(jz4770_tcu, "ingenic,jz4770-tcu", ingenic_tcu_init);
+CLOCKSOURCE_OF_DECLARE(jz4780_tcu, "ingenic,jz4780-tcu", ingenic_tcu_init);
-- 
2.11.0