Re: [PATCH v2 6/7] iio: adc: ina2xx: Align timestamp with conversion ready flag

[Jonathan Cameron]

On Thu, 21 Dec 2017 19:31:37 +0100
Stefan BrÃns <stefan.bruens@xxxxxxxxxxxxxx> wrote:

> As the timestamp is no longer (ab-)used to measure the function run time,
> it can be taken at the correct time, i.e. when the conversion has finished.
> 
> Signed-off-by: Stefan BrÃns <stefan.bruens@xxxxxxxxxxxxxx>
Applied.

Thanks,

Jonathan

> ---
> 
> Changes in v2: None
> 
>  drivers/iio/adc/ina2xx-adc.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
> index 415e53b5c0a6..b7407ac91b59 100644
> --- a/drivers/iio/adc/ina2xx-adc.c
> +++ b/drivers/iio/adc/ina2xx-adc.c
> @@ -706,8 +706,6 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev)
>  	s64 time;
>  	unsigned int alert;
>  
> -	time = iio_get_time_ns(indio_dev);
> -
>  	/*
>  	 * Because the timer thread and the chip conversion clock
>  	 * are asynchronous, the period difference will eventually
> @@ -736,6 +734,8 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev)
>  
>  		} while (!alert);
>  
> +	time = iio_get_time_ns(indio_dev);
> +
>  	/*
>  	 * Single register reads: bulk_read will not work with ina226/219
>  	 * as there is no auto-increment of the register pointer.