Re: [PATCH v3] PCI: imx6: Add PHY reference clock source support

[Lucas Stach]

Am Donnerstag, den 04.01.2018, 15:52 +0200 schrieb Ilya Ledvich:
> i.MX7D variant of the IP can use either Crystal Oscillator input
> or internal clock input as a Reference Clock input for PCIe PHY.
> Add support for an optional property 'fsl,pcie-phy-refclk-internal'.
> If present then an internal clock input is used as PCIe PHY
> reference clock source. By default an external oscillator input
> is still used.
> 
> Verified on Compulab SBC-iMX7 Single Board Computer.

Sorry to get in late here, but I would rather have the external clock
input modeled as a real clock and only use the internal clock if that
isn't present.

Are you even sure that the i.MX7 clock you mention isn't the already
documented "pcie_bus" clock? This one is also allowed to be sourced
externally on the i.MX6.

Regards,
Lucas

> Signed-off-by: Ilya Ledvich <ilya@xxxxxxxxxxxxxx>
> ---
> changes since V2:
> 	add a vendor prefix 'fsl' to a new property
> 
> ÂDocumentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 5 +++++
> Âdrivers/pci/dwc/pci-imx6.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ| 8
> +++++++-
> Â2 files changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt 
> b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> index 7b1e48b..1591a6a 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> @@ -50,6 +50,11 @@ Additional required properties for imx7d-pcie:
> Â	ÂÂÂÂÂÂÂ- "pciephy"
> Â	ÂÂÂÂÂÂÂ- "apps"
> Â
> +Additional optional properties for imx7d-pcie:
> +- fsl,pcie-phy-refclk-internal: If present then an internal PLL
> input is used
> +ÂÂas PCIe PHY reference clock source. By default an external
> oscillator input
> +ÂÂis used.
> +
> ÂExample:
> Â
> Â	pcie@0x01000000 {
> diff --git a/drivers/pci/dwc/pci-imx6.c b/drivers/pci/dwc/pci-imx6.c
> index b734835..36812d3 100644
> --- a/drivers/pci/dwc/pci-imx6.c
> +++ b/drivers/pci/dwc/pci-imx6.c
> @@ -61,6 +61,7 @@ struct imx6_pcie {
> Â	u32			tx_swing_low;
> Â	int			link_gen;
> Â	struct regulator	*vpcie;
> +	bool			pciephy_refclk_sel;
> Â};
> Â
> Â/* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */
> @@ -474,7 +475,9 @@ static void imx6_pcie_init_phy(struct imx6_pcie
> *imx6_pcie)
> Â	switch (imx6_pcie->variant) {
> Â	case IMX7D:
> Â		regmap_update_bits(imx6_pcie->iomuxc_gpr,
> IOMUXC_GPR12,
> -				ÂÂÂIMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> 0);
> +				ÂÂÂIMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> +				ÂÂÂimx6_pcie->pciephy_refclk_sel ?
> +				ÂÂÂIMX7D_GPR12_PCIE_PHY_REFCLK_SEL :
> 0);
> Â		break;
> Â	case IMX6SX:
> Â		regmap_update_bits(imx6_pcie->iomuxc_gpr,
> IOMUXC_GPR12,
> @@ -840,6 +843,9 @@ static int imx6_pcie_probe(struct platform_device
> *pdev)
> Â		imx6_pcie->vpcie = NULL;
> Â	}
> Â
> +	imx6_pcie->pciephy_refclk_sel =
> +		of_property_read_bool(node, "fsl,pcie-phy-refclk-
> internal");
> +
> Â	platform_set_drvdata(pdev, imx6_pcie);
> Â
> Â	ret = imx6_add_pcie_port(imx6_pcie, pdev);