Re: [PATCH v2 2/4] dmaengine: xilinx_dma: properly configure the SG mode bit in the driver for cdma

[Vinod Koul]

On Wed, Jan 03, 2018 at 12:12:09PM +0530, Kedareswara rao Appana wrote:
> If the hardware is configured for Scatter Gather(SG) mode,
> and hardware is idle, in the control register SG mode bit
> must be set to a 0 then back to 1 by the software, to force
> the CDMA SG engine to use a new value written to the CURDESC_PNTR
> register, failure to do so could result errors from the dmaengine.

Applied 2-4, thanks

-- 
~Vinod