[PATCH 1/5] Documentation/pktgen: Clearify how-to use pktgen samples

[Dmitry Safonov]

o Change process name in ps output: looks like, these days the process
  is named kpktgend_<cpu>, rather than pktgen/<cpu>.
o Use pg_ctrl for start/stop as it can work well with pgset without
  changes to $(PGDEV) variable.
o Clarify a bit needed $(PGDEV) definition for sample scripts and that
  one needs to `source functions.sh`.
o Document how-to unset a behaviour flag, note about history expansion.
o Fix pgset spi parameter value.

Cc: Jonathan Corbet <corbet@xxxxxxx>
Cc: linux-doc@xxxxxxxxxxxxxxx
Signed-off-by: Dmitry Safonov <dima@xxxxxxxxxx>
---
 Documentation/networking/pktgen.txt | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt
index 2c4e3354e128..d2fd78f85aa4 100644
--- a/Documentation/networking/pktgen.txt
+++ b/Documentation/networking/pktgen.txt
@@ -12,8 +12,8 @@ suitable sample script and configure that.
 On a dual CPU:
 
 ps aux | grep pkt
-root       129  0.3  0.0     0    0 ?        SW    2003 523:20 [pktgen/0]
-root       130  0.3  0.0     0    0 ?        SW    2003 509:50 [pktgen/1]
+root       129  0.3  0.0     0    0 ?        SW    2003 523:20 [kpktgend_0]
+root       130  0.3  0.0     0    0 ?        SW    2003 509:50 [kpktgend_1]
 
 
 For monitoring and control pktgen creates:
@@ -113,9 +113,16 @@ Configuring devices
 ===================
 This is done via the /proc interface, and most easily done via pgset
 as defined in the sample scripts.
+You need to specify PGDEV environment variable to use functions from sample
+scripts, i.e.:
+export PGDEV=/proc/net/pktgen/eth4@0
+source samples/pktgen/functions.sh
 
 Examples:
 
+ pg_ctrl start           starts injection.
+ pg_ctrl stop            aborts injection. Also, ^C aborts generator.
+
  pgset "clone_skb 1"     sets the number of copies of the same packet
  pgset "clone_skb 0"     use single SKB for all transmits
  pgset "burst 8"         uses xmit_more API to queue 8 copies of the same
@@ -165,8 +172,12 @@ Examples:
                               IPSEC # IPsec encapsulation (needs CONFIG_XFRM)
                               NODE_ALLOC # node specific memory allocation
                               NO_TIMESTAMP # disable timestamping
+ pgset 'flag ![name]'    Clear a flag to determine behaviour.
+                         Note that you might need to use single quote in
+                         interactive mode, so that your shell wouldn't expand
+                         the specified flag as a history command.
 
- pgset spi SPI_VALUE     Set specific SA used to transform packet.
+ pgset "spi [SPI_VALUE]" Set specific SA used to transform packet.
 
  pgset "udp_src_min 9"   set UDP source port min, If < udp_src_max, then
                          cycle through the port range.
@@ -207,8 +218,6 @@ Examples:
  pgset "tos XX"           set former IPv4 TOS field (e.g. "tos 28" for AF11 no ECN, default 00)
  pgset "traffic_class XX" set former IPv6 TRAFFIC CLASS (e.g. "traffic_class B8" for EF no ECN, default 00)
 
- pgset stop    	          aborts injection. Also, ^C aborts generator.
-
  pgset "rate 300M"        set rate to 300 Mb/s
  pgset "ratep 1000000"    set rate to 1Mpps
 
-- 
2.13.6