[PATCH V6 09/13] boot_constraint: Add support for Hisilicon platforms

[Viresh Kumar]

This adds boot constraint support for Hisilicon platforms. Currently
only one use case is supported: earlycon. One of the UART is enabled by
the bootloader and is used for early console in the kernel. The boot
constraint core handles it properly and removes constraints once the
serial device is probed by its driver.

This is tested on hi6220-hikey 96board.

Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
 arch/arm64/Kconfig.platforms     |   1 +
 drivers/boot_constraint/Makefile |   2 +
 drivers/boot_constraint/hikey.c  | 158 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 161 insertions(+)
 create mode 100644 drivers/boot_constraint/hikey.c

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 2401373565ff..a586ed728393 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -87,6 +87,7 @@ config ARCH_HISI
 	select ARM_TIMER_SP804
 	select HISILICON_IRQ_MBIGEN if PCI
 	select PINCTRL
+	select DEV_BOOT_CONSTRAINT
 	help
 	  This enables support for Hisilicon ARMv8 SoC family
 
diff --git a/drivers/boot_constraint/Makefile b/drivers/boot_constraint/Makefile
index a765094623a3..5609280162c4 100644
--- a/drivers/boot_constraint/Makefile
+++ b/drivers/boot_constraint/Makefile
@@ -1,3 +1,5 @@
 # Makefile for device boot constraints
 
 obj-y := clk.o deferrable_dev.o core.o pm.o supply.o
+
+obj-$(CONFIG_ARCH_HISI)			+= hikey.o
diff --git a/drivers/boot_constraint/hikey.c b/drivers/boot_constraint/hikey.c
new file mode 100644
index 000000000000..25acb4070569
--- /dev/null
+++ b/drivers/boot_constraint/hikey.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This takes care of Hisilicon boot time device constraints, normally set by
+ * the Bootloader.
+ *
+ * Copyright (C) 2017 Linaro.
+ * Viresh Kumar <viresh.kumar@xxxxxxxxxx>
+ */
+
+#include <linux/boot_constraint.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+
+static bool earlycon_boot_constraints_enabled __initdata;
+
+static int __init enable_earlycon_boot_constraints(char *str)
+{
+	earlycon_boot_constraints_enabled = true;
+
+	return 0;
+}
+
+__setup_param("earlycon", boot_constraint_earlycon,
+	      enable_earlycon_boot_constraints, 0);
+__setup_param("earlyprintk", boot_constraint_earlyprintk,
+	      enable_earlycon_boot_constraints, 0);
+
+
+struct hikey_machine_constraints {
+	struct dev_boot_constraint_of *dev_constraints;
+	unsigned int count;
+};
+
+static struct dev_boot_constraint_clk_info uart_iclk_info = {
+	.name = "uartclk",
+};
+
+static struct dev_boot_constraint_clk_info uart_pclk_info = {
+	.name = "apb_pclk",
+};
+
+static struct dev_boot_constraint hikey3660_uart_constraints[] = {
+	{
+		.type = DEV_BOOT_CONSTRAINT_CLK,
+		.data = &uart_iclk_info,
+	}, {
+		.type = DEV_BOOT_CONSTRAINT_CLK,
+		.data = &uart_pclk_info,
+	},
+};
+
+static const char * const uarts_hikey3660[] = {
+	"serial@fff32000",	/* UART 6 */
+};
+
+static struct dev_boot_constraint_of hikey3660_dev_constraints[] = {
+	{
+		.compat = "arm,pl011",
+		.constraints = hikey3660_uart_constraints,
+		.count = ARRAY_SIZE(hikey3660_uart_constraints),
+
+		.dev_names = uarts_hikey3660,
+		.dev_names_count = ARRAY_SIZE(uarts_hikey3660),
+	},
+};
+
+static struct hikey_machine_constraints hikey3660_constraints = {
+	.dev_constraints = hikey3660_dev_constraints,
+	.count = ARRAY_SIZE(hikey3660_dev_constraints),
+};
+
+static const char * const uarts_hikey6220[] = {
+	"uart@f7113000",	/* UART 3 */
+};
+
+static struct dev_boot_constraint_of hikey6220_dev_constraints[] = {
+	{
+		.compat = "arm,pl011",
+		.constraints = hikey3660_uart_constraints,
+		.count = ARRAY_SIZE(hikey3660_uart_constraints),
+
+		.dev_names = uarts_hikey6220,
+		.dev_names_count = ARRAY_SIZE(uarts_hikey6220),
+	},
+};
+
+static struct hikey_machine_constraints hikey6220_constraints = {
+	.dev_constraints = hikey6220_dev_constraints,
+	.count = ARRAY_SIZE(hikey6220_dev_constraints),
+};
+
+static struct dev_boot_constraint hikey3798cv200_uart_constraints[] = {
+	{
+		.type = DEV_BOOT_CONSTRAINT_CLK,
+		.data = &uart_pclk_info,
+	},
+};
+
+static const char * const uarts_hikey3798cv200[] = {
+	"serial@8b00000",	/* UART 0 */
+};
+
+static struct dev_boot_constraint_of hikey3798cv200_dev_constraints[] = {
+	{
+		.compat = "arm,pl011",
+		.constraints = hikey3798cv200_uart_constraints,
+		.count = ARRAY_SIZE(hikey3798cv200_uart_constraints),
+
+		.dev_names = uarts_hikey3798cv200,
+		.dev_names_count = ARRAY_SIZE(uarts_hikey3798cv200),
+	},
+};
+
+static struct hikey_machine_constraints hikey3798cv200_constraints = {
+	.dev_constraints = hikey3798cv200_dev_constraints,
+	.count = ARRAY_SIZE(hikey3798cv200_dev_constraints),
+};
+
+static const struct of_device_id machines[] __initconst = {
+	{ .compatible = "hisilicon,hi3660", .data = &hikey3660_constraints },
+	{ .compatible = "hisilicon,hi3798cv200", .data = &hikey3798cv200_constraints },
+	{ .compatible = "hisilicon,hi6220", .data = &hikey6220_constraints },
+	{ }
+};
+
+static int __init hikey_constraints_init(void)
+{
+	const struct hikey_machine_constraints *constraints;
+	const struct of_device_id *match;
+	struct device_node *np;
+
+	if (!earlycon_boot_constraints_enabled)
+		return 0;
+
+	np = of_find_node_by_path("/");
+	if (!np)
+		return -ENODEV;
+
+	match = of_match_node(machines, np);
+	of_node_put(np);
+
+	if (!match)
+		return 0;
+
+	constraints = match->data;
+
+	dev_boot_constraint_add_deferrable_of(constraints->dev_constraints,
+					      constraints->count);
+
+	return 0;
+}
+
+/*
+ * The amba-pl011 driver registers itself from arch_initcall level. Setup the
+ * serial boot constraints before that in order not to miss any boot messages.
+ */
+postcore_initcall_sync(hikey_constraints_init);
-- 
2.15.0.194.g9af6a3dea062