Re: [11/12] watchdog: sp5100-tco: Abort if watchdog is disabled by hardware

[Guenter Roeck]

On 01/09/2018 06:41 PM, Gabriel C wrote:
> 2018-01-10 3:09 GMT+01:00 Guenter Roeck <linux@xxxxxxxxxxxx>:
> > On Wed, Jan 10, 2018 at 02:26:14AM +0100, Gabriel C wrote:
> > > On 10.01.2018 01:05, Guenter Roeck wrote:
> > > > Hi,
> > > >
> > > > On Wed, Jan 10, 2018 at 12:58:00AM +0100, Gabriel C wrote:
> > > > > On 10.01.2018 00:37, Guenter Roeck wrote:
> > > > > > Hi,
> > > > > >
> > > > > > On Tue, Jan 09, 2018 at 05:58:07PM -0500, Lyude Paul wrote:
> > > > > > > Hi! I'm the one from the Fedora bugzilla who said they'd help review these
> > > > > > > patches. I might end up responding to this with a real review comment after
> > > > > > > this message, but first:
> > > > > > >
> > > > > > > mind cc'ing me future versions of this patchset and also, is there any way you
> > > > > >
> > > > > > Sure.
> > > > > >
> > > > > > > know of that one could figure out whether or not the sp5100_tco wdt is
> > > > > > > actually disabled by the OEM on a board? I tried testing these patches with my
> > > > > >
> > > > > > That is what the code is trying to do today.
> > > > > >
> > > > > > > system and it appears to be convinced that it's disabled on my system, but I'm
> > > > > > > hoping something in this patch is just brokenâ
> > > > > >
> > > > > > I tested the driver on three different boards. MSI B350M MORTAR,
> > > > > > MSI B350 TOMAHAWK, and Gigabyte AB350M-Gaming 3. CPU is Ryzen 1700X
> > > > > > on all boards.
> > > > > >
> > > > > > On the MSI boards, the watchdog is reported as disabled. Enabling it
> > > > > > and letting it expire does not have an effect. I am using the Super-IO
> > > > > > watchdog instead on those boards (and it works).
> > > > > >
> > > > > > On the Gigabyte board, the watchdog is reported as enabled, and it works
> > > > > > (and the watchdog on the Super-IO chips does not work).
> > > > > >
> > > > > > Feel free to play with the driver. Maybe there is a means to enable the
> > > > > > watchdog if it is disabled. Unfortunately, I was unable to figure out how
> > > > > > to do it, so I thought it is better to report the fact and not instantiate
> > > > > > the watchdog if it doesn't work.
> > > > >
> > > > > I haven an Supemricro H11DSi-NT with EPYCs CPUs..
> > > > > I can set the watchdog ON/OFF in BIOS and also set in to reset or NMI
> > > > > with the moatherboard jumpers.
> > > > >
> > > > > If you want I can give whatever patches for this driver an try ,
> > > > > just let me know.
> > > >
> > > > It would be great if you can test the series, even more so if you can test it
> > > > with the watchdog enabled and disabled . If you need to pull it from a git
> > > > repository, it is available from
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
> > > > in branch watchdog-next.
> > >
> > > I've tested the branch ( on top latest linus/master ) with watchdog ON/OFF
> > > in BIOS and jumper set to reset ( default on this board )
> > >
> > > It seems no matter is enabled or disabled I always get a disabled message from the driver.
> > >
> > > [    4.246280] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
> > > [    4.247052] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
> > > [    4.247181] sp5100-tco sp5100-tco: Watchdog hardware is disabled
> > >
> > > I got some strange NMI but this may not be related.
> > >
> > > 'Uhhuh. NMI received for unknown reason 3d on CPU 33' ( on all 64 CPUs )
> > >
> > >
> > > Maybe on that board is meant to 'enable' the BMC watchdog ..but BIOS tells
> > > 'if you enable watchdog the 5 minutes timer is started until OS/SW takes over'
> > >
> > > And a quick info shows there is no initial timer on the BMC Watchdog..
> > >
> > > crazy@ant:~/sp5100_tco$ sudo bmc-watchdog -g
> > > Timer Use:                   Reserved
> > > Timer:                       Stopped
> > > Logging:                     Enabled
> > > Timeout Action:              None
> > > Pre-Timeout Interrupt:       None
> > > Pre-Timeout Interval:        0 seconds
> > > Timer Use BIOS FRB2 Flag:    Clear
> > > Timer Use BIOS POST Flag:    Clear
> > > Timer Use BIOS OS Load Flag: Clear
> > > Timer Use BIOS SMS/OS Flag:  Clear
> > > Timer Use BIOS OEM Flag:     Clear
> > > Initial Countdown:           0 seconds
> > > Current Countdown:           0 seconds
> > >
> > >
> > > I try to have a closer look tomorrow.
> >
> > Can you run sensors-detect and provide the output ?
> > Maybe the board uses the watchdog from a Super-IO chip,
> > similar to the MSI boards.
>
> Only k10temp and IPMI BMC KCS is detected.
> Also the board seems to have 2 jumpers to enable/disable
> i2c SMB or something on SMB , which seems to be set to disabled by default.

I can't comment on the i2c part, but other than that it looks like the IPMI BMC
is supposed to control everything.

Guenter