Re: [RESEND PATCH 1/3] usb: dwc3: Don't reinitialize core during host bus-suspend/resume

[Manu Gautam]

Hi,


On 1/10/2018 6:18 PM, Roger Quadros wrote:
> Hi Manu,
>
> On 27/09/17 14:19, Manu Gautam wrote:
>> Driver powers-off PHYs and reinitializes DWC3 core and gadget on
>> resume. While this works fine for gadget mode but in host
>> mode there is not re-initialization of host stack. Also, resetting
>> bus as part of bus_suspend/resume is not correct which could affect
>> (or disconnect) connected devices.
>> Fix this by not reinitializing core on suspend/resume in host mode
>> for HOST only and OTG/drd configurations.
>>
> All this seems correct but we (TI) were relying on dwc3_core_exit() to be called
> during dwc3_suspend() to have the lowest power state for our platforms.
>
> After this patch, DWC3 controller and PHYs won't be turned off thus
> preventing our platform from reaching low power levels.
>
> So this is a regression for us (TI) in v4.15-rc.
>
> Felipe, do you agree?
>
> If yes I can send a patch which fixes the regression
> and also makes USB host work after suspend/resume.
>

I think it will be better to separate runtime_suspend and pm_suspend handling for
host mode in dwc3. Powering offf/on PHYs and dwc3_core_exit/init across system
suspend-resume should be ok but doing that for runtime suspend-resume is not
correct.
Let me know if that sounds ok, I can provide a patch for same instead of
reverting this which affects runtime PM with dwc3 host.
Also, we need to consider dwc3 in Host mode with dr_mode as DRD/OTG similar to
dr_mode as HOST.


-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project