[PATCH 0/6] Nintendo Wii GPIO driver

From: Jonathan NeuschÃfer
Date: Sun Jan 14 2018 - 22:14:48 EST


This series adds a driver for the GPIO controller used in the Nintendo
Wii game console.

The driver itself, and the related devicetree work should be pretty
uncontroversial, but due to the system architecture of the Wii, I also
had to extend an old resource allocation hack to kernel/resource.c: On
the Wii, there are two separate RAM ranges, with MMIO right in the
middle, but AFAIK, Linux on PPC32 doesn't support discontiguous memory
properly. So the hack is to allocate one big RAM range with a hole
(marked as reserved memory) for MMIO in the middle.

Because this series touches different subsystems (GPIO, DT, core
resource management), I guess it should be picked up patch-by-patch by
the different maintainers.

Jonathan NeuschÃfer (6):
resource: Extend the PPC32 reserved memory hack
powerpc: wii: Explicitly configure GPIO owner for poweroff pin
gpio: Add GPIO driver for Nintendo Wii
dt-bindings: gpio: Add binding for Wii GPIO controller
powerpc: wii.dts: Add ngpios property
powerpc: wii.dts: Add GPIO line names

.../bindings/gpio/nintendo,hollywood-gpio.txt | 27 +++
.../devicetree/bindings/powerpc/nintendo/wii.txt | 9 +-
arch/powerpc/boot/dts/wii.dts | 9 +
arch/powerpc/platforms/embedded6xx/wii.c | 7 +
drivers/gpio/Kconfig | 8 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-hlwd.c | 183 +++++++++++++++++++++
kernel/resource.c | 21 ++-
8 files changed, 256 insertions(+), 9 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
create mode 100644 drivers/gpio/gpio-hlwd.c

--
2.15.1