[PATCH v5 14/17] phy: Add USB speed related PHY modes

[Manu Gautam]

Add following USB speed related PHY modes:
LS (Low Speed), FS (Full Speed), HS (High Speed), SS (Super Speed)

Speed related information is required by some QCOM PHY drivers
to program PHY monitor resume/remote-wakeup events in suspended
state. Speed is needed in order to set correct polarity of wakeup
events for detection. E.g. QUSB2 PHY monitors DP/DM line state
depending on whether speed is LS or FS/HS to detect resume.
Similarly QMP USB3 PHY in SS mode should monitor RX terminations
attach/detach and LFPS events depending on SSPHY is active or not.

Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
---
 drivers/phy/phy-core.c  |  2 ++
 include/linux/phy/phy.h | 18 ++++++++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index b4964b0..3c31ce5 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -351,6 +351,8 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode)
 
 	mutex_lock(&phy->mutex);
 	ret = phy->ops->set_mode(phy, mode);
+	if (!ret)
+		phy->attrs.mode = mode;
 	mutex_unlock(&phy->mutex);
 
 	return ret;
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index d8da3e5..b951f90 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -25,7 +25,15 @@
 enum phy_mode {
 	PHY_MODE_INVALID,
 	PHY_MODE_USB_HOST,
+	PHY_MODE_USB_HOST_LS,
+	PHY_MODE_USB_HOST_FS,
+	PHY_MODE_USB_HOST_HS,
+	PHY_MODE_USB_HOST_SS,
 	PHY_MODE_USB_DEVICE,
+	PHY_MODE_USB_DEVICE_LS,
+	PHY_MODE_USB_DEVICE_FS,
+	PHY_MODE_USB_DEVICE_HS,
+	PHY_MODE_USB_DEVICE_SS,
 	PHY_MODE_USB_OTG,
 	PHY_MODE_SGMII,
 	PHY_MODE_10GKR,
@@ -61,6 +69,7 @@ struct phy_ops {
  */
 struct phy_attrs {
 	u32			bus_width;
+	enum phy_mode		mode;
 };
 
 /**
@@ -144,6 +153,10 @@ static inline void *phy_get_drvdata(struct phy *phy)
 int phy_power_on(struct phy *phy);
 int phy_power_off(struct phy *phy);
 int phy_set_mode(struct phy *phy, enum phy_mode mode);
+static inline enum phy_mode phy_get_mode(struct phy *phy)
+{
+	return phy->attrs.mode;
+}
 int phy_reset(struct phy *phy);
 int phy_calibrate(struct phy *phy);
 static inline int phy_get_bus_width(struct phy *phy)
@@ -260,6 +273,11 @@ static inline int phy_set_mode(struct phy *phy, enum phy_mode mode)
 	return -ENOSYS;
 }
 
+static inline enum phy_mode phy_get_mode(struct phy *phy)
+{
+	return PHY_MODE_INVALID;
+}
+
 static inline int phy_reset(struct phy *phy)
 {
 	if (!phy)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project