[PATCH] arm64: dts: hikey: Enable HS200 mode on eMMC

[oscardagrach]

According to the hi6220 datasheet, the MMC controller is JEDEC eMMC 4.5
compliant, in addition to supporting a clock of up to 150MHz. The Hikey
schematic also indicates the device utilizes 1.8v signaling. Define these
parameters in the device tree to enable HS200 mode.

Signed-off-by: Ryan Grachek <ryan@xxxxxxxxx>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 3aee6123d161..964e43e05ac6 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -299,7 +299,9 @@
 		/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
 
 		dwmmc_0: dwmmc0@f723d000 {
+			max-frequency = <150000000>;
 			cap-mmc-highspeed;
+			mmc-hs200-1_8v;
 			non-removable;
 			bus-width = <0x8>;
 			vmmc-supply = <&ldo19>;
-- 
2.11.0