Re: [PATCH 1/3] dt-bindings: phy: phy-rockchip-typec: add usb3 otg reset

[Enric Balletbo Serra]

2018-01-17 23:07 GMT+01:00 Brian Norris <briannorris@xxxxxxxxxxxx>:
> + Enric
>
> On Fri, Jan 12, 2018 at 06:08:22PM +0800, William Wu wrote:
>> This patch adds USB3 OTG reset property for rk3399 Type-C PHY
>> to hold the USB3 controller in reset state.
>>
>> Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx>
>> ---
>
> I was going back and forth on this, since at one point this binding was
> merged but had no enabled users...but now I see Heiko has queued up some
> of Enric's work for 4.16, and it uses the existing binding.
>
> So, if this reset is added, it should be optional.
>

As Brian said commit 06c47e6286d5 'usb: dwc3: of-simple: Add support
to get resets for the device' introduced the support to get the resets
from dwc3-of-simple and the queued commit 'b7e63d95c14d arm64: dts:
rockchip: add reset property for dwc3 controllers on rk3399' started
using it. Without the latest I get errors like this doing bind/unbind
tests.

   dwc3: probe of fe900000.dwc3 failed with error -110

I just tested these series on top of mainline, I reverted my patch
because otherwise two drivers are requesting the same reset and fails,
and I did some of the bind/unbind test. They just worked fine, and
seems that this is right way, so this makes me think some questions.

Should 'b7e63d95c14d arm64: dts: rockchip: add reset property for dwc3
controllers on rk3399' removed for 4.16? That's a question for Heiko I
guess, if it's removed we will have usb broken meanwhile these patches
doesn't land. If we don't remove the patch we will need to introduce a
new patch in this series that reverts the first patch.

Is commit 06c47e6286d5 'usb: dwc3: of-simple: Add support to get
resets for the device'  really needed ? Seems that I was the only user
of it.

Anyway, these patches looks good to me and are

Tested-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>

> Brian
>
>>  Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt | 12 +++++++-----
>>  1 file changed, 7 insertions(+), 5 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
>> index 6ea867e..db2902e 100644
>> --- a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
>> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
>> @@ -13,7 +13,7 @@ Required properties:
>>   - assigned-clock-rates : the phy core clk frequency, shall be: 50000000
>>   - resets : a list of phandle + reset specifier pairs
>>   - reset-names : string reset name, must be:
>> -              "uphy", "uphy-pipe", "uphy-tcphy"
>> +              "uphy", "uphy-pipe", "uphy-tcphy", "usb3-otg"
>>   - extcon : extcon specifier for the Power Delivery
>>
>>  Note, there are 2 type-c phys for RK3399, and they are almost identical, except
>> @@ -56,8 +56,9 @@ Example:
>>               assigned-clock-rates = <50000000>;
>>               resets = <&cru SRST_UPHY0>,
>>                        <&cru SRST_UPHY0_PIPE_L00>,
>> -                      <&cru SRST_P_UPHY0_TCPHY>;
>> -             reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
>> +                      <&cru SRST_P_UPHY0_TCPHY>,
>> +                      <&cru SRST_A_USB3_OTG0>;
>> +             reset-names = "uphy", "uphy-pipe", "uphy-tcphy", "usb3-otg";
>>               rockchip,typec-conn-dir = <0xe580 0 16>;
>>               rockchip,usb3tousb2-en = <0xe580 3 19>;
>>               rockchip,external-psm = <0xe588 14 30>;
>> @@ -84,8 +85,9 @@ Example:
>>               assigned-clock-rates = <50000000>;
>>               resets = <&cru SRST_UPHY1>,
>>                        <&cru SRST_UPHY1_PIPE_L00>,
>> -                      <&cru SRST_P_UPHY1_TCPHY>;
>> -             reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
>> +                      <&cru SRST_P_UPHY1_TCPHY>,
>> +                      <&cru SRST_A_USB3_OTG1>;
>> +             reset-names = "uphy", "uphy-pipe", "uphy-tcphy", "usb3-otg";
>>               rockchip,typec-conn-dir = <0xe58c 0 16>;
>>               rockchip,usb3tousb2-en = <0xe58c 3 19>;
>>               rockchip,external-psm = <0xe594 14 30>;
>> --
>> 2.0.0
>>
>>