[PATCH 3/9] clk: meson: remove unnecessary rounding in the pll clock

From: Jerome Brunet
Date: Thu Jan 18 2018 - 13:47:27 EST


The pll driver perform the rate calculation in Mhz, which adds an
unnecessary rounding down to the Mhz of the rate. Use 64bits long
integer to perform this calculation safely on meson8b and perform the
calculation in Hz instead

Fixes: 7a29a869434e ("clk: meson: Add support for Meson clock controller")
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
drivers/clk/meson/clk-pll.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
index 2614341fc4ad..fa4cec13d6e8 100644
--- a/drivers/clk/meson/clk-pll.c
+++ b/drivers/clk/meson/clk-pll.c
@@ -51,8 +51,7 @@ static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw,
{
struct meson_clk_pll *pll = to_meson_clk_pll(hw);
struct parm *p;
- unsigned long parent_rate_mhz = parent_rate / 1000000;
- unsigned long rate_mhz;
+ u64 rate;
u16 n, m, frac = 0, od, od2 = 0;
u32 reg;

@@ -74,17 +73,18 @@ static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw,
od2 = PARM_GET(p->width, p->shift, reg);
}

+ rate = (u64)m * parent_rate;
+
p = &pll->frac;
if (p->width) {
reg = readl(pll->base + p->reg_off);
frac = PARM_GET(p->width, p->shift, reg);
- rate_mhz = (parent_rate_mhz * m + \
- (parent_rate_mhz * frac >> 12)) * 2 / n;
- rate_mhz = rate_mhz >> od >> od2;
- } else
- rate_mhz = (parent_rate_mhz * m / n) >> od >> od2;

- return rate_mhz * 1000000;
+ rate += (u64)parent_rate * frac >> 12;
+ rate *= 2;
+ }
+
+ return (rate / n) >> od >> od2;
}

static long meson_clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
--
2.14.3