RE: [PATCH v3 1/2] dt-bindings: Document mti,mips-cpc binding

[Aleksandar Markovic]

> On Wed, Dec 27, 2017 at 03:37:51PM +0100, Aleksandar Markovic wrote:
> > From: Paul Burton <paul.burton@xxxxxxxx>
> >
> > Document a binding for the MIPS Cluster Power Controller (CPC) that
> > allows the device tree to specify where the CPC registers are located.
> >
> > Signed-off-by: Paul Burton <paul.burton@xxxxxxxx>
> > Signed-off-by: Aleksandar Markovic <aleksandar.markovic@xxxxxxxx>
> > ---
> >  Documentation/devicetree/bindings/power/mti,mips-cpc.txt | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/power/mti,mips-cpc.txt
> >
> > diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.txt b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt
> > new file mode 100644
> 
> Is it worth adding to the MIPS GENERIC PLATFORM entry of MAINTAINERS,
> given that it directly benefits it?
> 
> Cheers
> James

If nobody objects, in the v4 of this series, as a part of this particular patch, I am going to add the line:

F:       Documentation/devicetree/bindings/power/mti,mips-cpc.txt

to the following segment in MAINTAINERS file:

MIPS GENERIC PLATFORM
M:      Paul Burton <paul.burton@xxxxxxxx>
L:      linux-mips@xxxxxxxxxxxxxx
S:      Supported
F:      arch/mips/generic/
F:      arch/mips/tools/generic-board-config.sh

v4 is planned to be sent by the end of the day.

Thanks,
Aleksandar