[PATCH v4 1/2] dt-bindings: Document mti,mips-cpc binding

[Aleksandar Markovic]

From: Paul Burton <paul.burton@xxxxxxxx>

Document a binding for the MIPS Cluster Power Controller (CPC) that
allows the device tree to specify where the CPC registers are located.

Signed-off-by: Paul Burton <paul.burton@xxxxxxxx>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@xxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/power/mti,mips-cpc.txt | 8 ++++++++
 MAINTAINERS                                              | 1 +
 2 files changed, 9 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/mti,mips-cpc.txt

diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.txt b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt
new file mode 100644
index 0000000..c6b8251
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt
@@ -0,0 +1,8 @@
+Binding for MIPS Cluster Power Controller (CPC).
+
+This binding allows a system to specify where the CPC registers are
+located.
+
+Required properties:
+compatible : Should be "mti,mips-cpc".
+regs: Should describe the address & size of the CPC register region.
diff --git a/MAINTAINERS b/MAINTAINERS
index 1899480..cca71b8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9108,6 +9108,7 @@ MIPS GENERIC PLATFORM
 M:	Paul Burton <paul.burton@xxxxxxxx>
 L:	linux-mips@xxxxxxxxxxxxxx
 S:	Supported
+F:	Documentation/devicetree/bindings/power/mti,mips-cpc.txt
 F:	arch/mips/generic/
 F:	arch/mips/tools/generic-board-config.sh
 
-- 
2.7.4