[PATCH v6 00/41] ARM: davinci: convert to common clock frameworkâ

From: David Lechner
Date: Sat Jan 20 2018 - 12:15:41 EST

Next message: David Lechner: "[PATCH v6 02/41] clk: davinci: New driver for davinci PLL clocks"
Previous message: David Lechner: "[PATCH v6 01/41] dt-bindings: clock: Add new bindings for TI Davinci PLL clocks"
Next in thread: David Lechner: "[PATCH v6 01/41] dt-bindings: clock: Add new bindings for TI Davinci PLL clocks"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This series converts mach-davinci to use the common clock framework.

The series works like this, the first 19 patches create new clock drivers
using the common clock framework. There are basically 3 groups of clocks -
PLL, PSC and CFGCHIP (syscon). There are six different SoCs that each have
unique init data, which is the reason for so many patches.

Then, starting with "ARM: da830: add new clock init using common clock",
we get the mach code ready for the switch by adding the code needed for
the new clock drivers and adding #ifndef CONFIG_COMMON_CLK around the
legacy clocks so that we can switch easily between the old and the new.

"ARM: davinci: switch to common clock framework" actually flips the switch
to start using the new clock drivers. Then the next 8 patches remove all
of the old clock code.

The final three patches add device tree clock support to the one SoC that
supports it.

v6 changes (also see individual patches for details):
- All of the device tree bindings are changed
- All of the clock drivers are changed significantly
- Fixed issues brought up during review of v5
- "ARM: davinci: move davinci_clk_init() to init_time" is removed from this
series and submitted separately

v5 changes:
- Basically, this is an entirely new series
- Patches are broken up into bite-sized pieces
- Converted PSC clock driver to use regmap
- Restored "force" flag for certain DA850 clocks
- Added device tree bindings
- Moved more of the clock init to drivers/clk
- Fixed frequency scaling (maybe*)

* I have frequency scaling using cpufreq-dt, so I know the clocks are doing
what they need to do to make this work, but I haven't figured out how to
test davinci-cpufreq driver yet. (Patches to make cpufreq-dt work will be
sent separately after this series has landed.)

Dependencies:

This series applies on top of linux-davinci/master plus the following patches:
- [1] "clk: fix reentrancy of clk_enable() on UP systems" (in clk-next)
- [2] "clk: add helper functions for managing clk_onecell_data"
- [3] "clk: divider: read-only divider can propagate rate change"
- [4],[5],[6],[7],[8],[9] series "ARM: davinci: common clock prep work"

You can find a working branch with everything included in the "common-clk-v6"
branch of https://github.com/dlech/ev3dev-kernel.git.

[1]: https://patchwork.kernel.org/patch/10145933/
[2]: https://patchwork.kernel.org/patch/10145873/
[3]: https://patchwork.kernel.org/patch/10146829/
[4]: https://patchwork.kernel.org/patch/10176241/
[5]: https://patchwork.kernel.org/patch/10176249/
[6]: https://patchwork.kernel.org/patch/10176245/
[7]: https://patchwork.kernel.org/patch/10176251/
[8]: https://patchwork.kernel.org/patch/10176243/
[9]: https://patchwork.kernel.org/patch/10176247/

Testing/debugging for the uninitiated:

I only have one device to test with, which is based on da850, so I will
have to rely on others to do some testing here. Since we are dealing with
clocks, if something isn't working, you most likely won't see output on
the serial port. To figure out what is going on, you need to enable...

CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y

and add "earlyprintk clk_ignore_unused" to the kernel command line options.
You may need to select a different UART for this depending on your board. I
think UART1 is the default in the kernel configuration.

On da850 devices comment out the lines:

else
clk_set_parent(clk, parent->clk);

in da850.c or, if using device tree, comment out the lines:

assigned-clocks = <&async3_clk>;
assigned-clock-parents = <&pll1_sysclk 2>;

in da850.dtsi when doing earlyprintk, otherwise the UART1 and UART2 clock
source will change during boot and cause garbled output after a point.

David Lechner (41):
dt-bindings: clock: Add new bindings for TI Davinci PLL clocks
clk: davinci: New driver for davinci PLL clocks
clk: davinci: Add platform information for TI DA830 PLL
clk: davinci: Add platform information for TI DA850 PLL
clk: davinci: Add platform information for TI DM355 PLL
clk: davinci: Add platform information for TI DM365 PLL
clk: davinci: Add platform information for TI DM644x PLL
clk: davinci: Add platform information for TI DM646x PLL
dt-bindings: clock: New bindings for TI Davinci PSC
clk: davinci: New driver for davinci PSC clocks
clk: davinci: Add platform information for TI DA830 PSC
clk: davinci: Add platform information for TI DA850 PSC
clk: davinci: Add platform information for TI DM355 PSC
clk: davinci: Add platform information for TI DM365 PSC
clk: davinci: Add platform information for TI DM644x PSC
clk: davinci: Add platform information for TI DM646x PSC
dt-bindings: clock: Add bindings for DA8XX CFGCHIP clocks
clk: davinci: New driver for TI DA8XX CFGCHIP clocks
clk: davinci: New driver for TI DA8XX USB PHY clocks
ARM: da830: add new clock init using common clock framework
ARM: da850: add new clock init using common clock framework
ARM: dm355: add new clock init using common clock framework
ARM: dm365: add new clock init using common clock framework
ARM: dm644x: add new clock init using common clock framework
ARM: dm646x: add new clock init using common clock framework
ARM: da8xx: add new USB PHY clock init using common clock framework
ARM: da8xx: add new sata_refclk init using common clock framework
ARM: davinci: remove CONFIG_DAVINCI_RESET_CLOCKS
ARM: davinci_all_defconfig: remove CONFIG_DAVINCI_RESET_CLOCKS
ARM: davinci: switch to common clock framework
ARM: da830: Remove legacy clock init
ARM: da850: Remove legacy clock init
ARM: dm355: Remove legacy clock init
ARM: dm365: Remove legacy clock init
ARM: dm644x: Remove legacy clock init
ARM: dm646x: Remove legacy clock init
ARM: da8xx: Remove legacy clock init
ARM: davinci: remove legacy clocks
ARM: davinci: add device tree support to timer
ARM: da8xx-dt: switch to device tree clocks
ARM: dts: da850: Add clocks

.../bindings/clock/ti/davinci/da8xx-cfgchip.txt | 93 +++
.../devicetree/bindings/clock/ti/davinci/pll.txt | 96 +++
.../devicetree/bindings/clock/ti/davinci/psc.txt | 66 ++
MAINTAINERS | 7 +
arch/arm/Kconfig | 2 +-
arch/arm/boot/dts/da850.dtsi | 162 ++++
arch/arm/configs/davinci_all_defconfig | 1 -
arch/arm/mach-davinci/Kconfig | 13 +-
arch/arm/mach-davinci/Makefile | 4 +-
arch/arm/mach-davinci/clock.c | 745 -------------------
arch/arm/mach-davinci/clock.h | 76 --
arch/arm/mach-davinci/common.c | 3 -
arch/arm/mach-davinci/da830.c | 440 +----------
arch/arm/mach-davinci/da850.c | 685 ++---------------
arch/arm/mach-davinci/da8xx-dt.c | 61 +-
arch/arm/mach-davinci/davinci.h | 4 +
arch/arm/mach-davinci/devices-da8xx.c | 43 +-
arch/arm/mach-davinci/devices.c | 1 -
arch/arm/mach-davinci/dm355.c | 386 +---------
arch/arm/mach-davinci/dm365.c | 472 +-----------
arch/arm/mach-davinci/dm644x.c | 318 +-------
arch/arm/mach-davinci/dm646x.c | 353 +--------
arch/arm/mach-davinci/include/mach/clock.h | 3 -
arch/arm/mach-davinci/include/mach/common.h | 8 -
arch/arm/mach-davinci/psc.c | 137 ----
arch/arm/mach-davinci/psc.h | 12 -
arch/arm/mach-davinci/time.c | 19 +-
arch/arm/mach-davinci/usb-da8xx.c | 256 ++-----
drivers/clk/Makefile | 1 +
drivers/clk/davinci/Makefile | 22 +
drivers/clk/davinci/da8xx-cfgchip.c | 305 ++++++++
drivers/clk/davinci/da8xx-usb-phy-clk.c | 312 ++++++++
drivers/clk/davinci/pll-da830.c | 51 ++
drivers/clk/davinci/pll-da850.c | 163 +++++
drivers/clk/davinci/pll-dm355.c | 66 ++
drivers/clk/davinci/pll-dm365.c | 110 +++
drivers/clk/davinci/pll-dm644x.c | 67 ++
drivers/clk/davinci/pll-dm646x.c | 63 ++
drivers/clk/davinci/pll.c | 813 +++++++++++++++++++++
drivers/clk/davinci/pll.h | 118 +++
drivers/clk/davinci/psc-da830.c | 85 +++
drivers/clk/davinci/psc-da850.c | 109 +++
drivers/clk/davinci/psc-dm355.c | 74 ++
drivers/clk/davinci/psc-dm365.c | 79 ++
drivers/clk/davinci/psc-dm644x.c | 68 ++
drivers/clk/davinci/psc-dm646x.c | 62 ++
drivers/clk/davinci/psc.c | 298 ++++++++
drivers/clk/davinci/psc.h | 88 +++
include/linux/clk/davinci.h | 37 +
49 files changed, 3683 insertions(+), 3774 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/ti/davinci/da8xx-cfgchip.txt
create mode 100644 Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
create mode 100644 Documentation/devicetree/bindings/clock/ti/davinci/psc.txt
delete mode 100644 arch/arm/mach-davinci/clock.c
delete mode 100644 arch/arm/mach-davinci/psc.c
create mode 100644 drivers/clk/davinci/Makefile
create mode 100644 drivers/clk/davinci/da8xx-cfgchip.c
create mode 100644 drivers/clk/davinci/da8xx-usb-phy-clk.c
create mode 100644 drivers/clk/davinci/pll-da830.c
create mode 100644 drivers/clk/davinci/pll-da850.c
create mode 100644 drivers/clk/davinci/pll-dm355.c
create mode 100644 drivers/clk/davinci/pll-dm365.c
create mode 100644 drivers/clk/davinci/pll-dm644x.c
create mode 100644 drivers/clk/davinci/pll-dm646x.c
create mode 100644 drivers/clk/davinci/pll.c
create mode 100644 drivers/clk/davinci/pll.h
create mode 100644 drivers/clk/davinci/psc-da830.c
create mode 100644 drivers/clk/davinci/psc-da850.c
create mode 100644 drivers/clk/davinci/psc-dm355.c
create mode 100644 drivers/clk/davinci/psc-dm365.c
create mode 100644 drivers/clk/davinci/psc-dm644x.c
create mode 100644 drivers/clk/davinci/psc-dm646x.c
create mode 100644 drivers/clk/davinci/psc.c
create mode 100644 drivers/clk/davinci/psc.h
create mode 100644 include/linux/clk/davinci.h

--
2.7.4

Next message: David Lechner: "[PATCH v6 02/41] clk: davinci: New driver for davinci PLL clocks"
Previous message: David Lechner: "[PATCH v6 01/41] dt-bindings: clock: Add new bindings for TI Davinci PLL clocks"
Next in thread: David Lechner: "[PATCH v6 01/41] dt-bindings: clock: Add new bindings for TI Davinci PLL clocks"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]