Re: [PATCH 00/14] MIPS: memblock: Switch arch code to NO_BOOTMEM

[Mathieu Malaterre]

Hi Matt,

On Mon, Jan 22, 2018 at 5:36 PM, Matt Redfearn <matt.redfearn@xxxxxxxx> wrote:
>
> Hi Serge,
>
>
> On 17/01/18 22:22, Serge Semin wrote:
>>
>> Even though it's common to see the architecture code using both
>> bootmem and memblock early memory allocators, it's not good for
>> multiple reasons. First of all, it's redundant to have two
>> early memory allocator while one would be more than enough from
>> functionality and stability points of view. Secondly, some new
>> features introduced in the kernel utilize the methods of the most
>> modern allocator ignoring the older one. It means the architecture
>> code must keep the both subsystems up synchronized with information
>> about memory regions and reservations, which leads to the code
>> complexity increase, that obviously increases bugs probability.
>> Finally it's better to keep all the architectures code unified for
>> better readability and code simplification. All these reasons lead
>> to one conclusion - arch code should use just one memory allocator,
>> which is supposed to be memblock as the most modern and already
>> utilized by the most of the kernel platforms. This patchset is
>> mostly about it.
>>
>> One more reason why the MIPS arch code should finally move to
>> memblock is a BUG somewhere in the initialization process, when
>> CMA is activated:
>>
>> [    0.248762] BUG: Bad page state in process swapper/0  pfn:01f93
>> [    0.255415] page:8205b0ac count:0 mapcount:-127 mapping:  (null) index:0x1
>> [    0.263172] flags: 0x40000000()
>> [    0.266723] page dumped because: nonzero mapcount
>> [    0.272049] Modules linked in:
>> [    0.275511] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.88-module #5
>> [    0.282900] Stack : 00000000 00000000 80b6dd6a 0000003a 00000000 00000000 80930000 8092bff4
>>            86073a14 80ac88c7 809f21ac 00000000 00000001 80b6998c 00000400 00000000
>>            80a00000 801822e8 80b6dd68 00000000 00000002 00000000 809f8024 86077ccc
>>            80b80000 801e9328 809fcbc0 00000000 00000400 00010000 86077ccc 86073a14
>>            00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>>            ...
>> [    0.323148] Call Trace:
>> [    0.325935] [<8010e7c4>] show_stack+0x8c/0xa8
>> [    0.330859] [<80404814>] dump_stack+0xd4/0x110
>> [    0.335879] [<801f0bc0>] bad_page+0xfc/0x14c
>> [    0.340710] [<801f0e04>] free_pages_prepare+0x1f4/0x330
>> [    0.346632] [<801f36c4>] __free_pages_ok+0x2c/0x104
>> [    0.352154] [<80b23a40>] init_cma_reserved_pageblock+0x5c/0x74
>> [    0.358761] [<80b29390>] cma_init_reserved_areas+0x1b4/0x240
>> [    0.365170] [<8010058c>] do_one_initcall+0xe8/0x27c
>> [    0.370697] [<80b14e60>] kernel_init_freeable+0x200/0x2c4
>> [    0.376828] [<808faca4>] kernel_init+0x14/0x104
>> [    0.381939] [<80107598>] ret_from_kernel_thread+0x14/0x1c
>>
>> The bugus pfn seems to be the one allocated for bootmem allocator
>> pages and hasn't been freed before letting the CMA working with its
>> areas. Anyway the bug is solved by this patchset.
>>
>> Another reason why this patchset is useful is that it fixes the fdt
>> reserved-memory nodes functionality for MIPS. Really it's bug to have
>> the fdt reserved nodes scanning before the memblock is
>> fully initialized (calling early_init_fdt_scan_reserved_mem before
>> bootmem_init is called). Additionally no-map flag of the
>> reserved-memory node hasn't been taking into account. This patchset
>> fixes all of these.
>>
>> As you probably remember I already did another attempt to merge a
>> similar functionality into the kernel. This time the patchset got
>> to be less complex (14 patches vs 21 last time) and fixes the
>> platform code like SGI IP27 and Loongson3, which due to being
>> NUMA introduce its own memory initialization process. Although
>> I have much doubt in SGI IP27 code operability in the first place,
>> since it got prom_meminit() method of early memory initialization,
>> which hasn't been called at any other place in the kernel. It must
>> have been left there unrenamed after arch/mips/mips-boards/generic
>> code had been discarded.
>>
>> Here are the list of folks, who agreed to perform some tests of
>> the patchset:
>> Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx> - Octeon2
>> Matt Redfearn <matt.redfearn@xxxxxxxx> - Loongson3, etc
>
>
>
> I have applied and tested these patches on various platforms that we have available here, and the kernel appears to boot and get to userspace as normal on the following platforms:
>
> UTM8 (Cavium Octeon III)
> Creator CI20

A bit off-topic, but could you please Acked one of Marcin's patch that
I re-submitted:

https://patchwork.linux-mips.org/patch/17986/

I believe CI20 wont boot from upstream kernel, since you are testing
patch I am guessing you have a running system (unless of course you
tweaked your u-boot env vars or use another different patch).

Thanks for your help