Re: [PATCH v6 00/41] ARM: davinci: convert to common clock frameworkâ

[David Lechner]

On 01/23/2018 12:10 PM, Bartosz Golaszewski wrote:
> 2018-01-23 18:03 GMT+01:00 Adam Ford <aford173@xxxxxxxxx>:
> > On Tue, Jan 23, 2018 at 10:06 AM, David Lechner <david@xxxxxxxxxxxxxx> wrote:
> > > On 01/23/2018 10:03 AM, David Lechner wrote:
> > > > You can see if the clock is enabled by running:
> > > >
> > > >       cat /sys/kernel/debug/clk/clk_summary
> > >
> > > I just realized if you can't boot, you can't do this. :-/
> >
> > I can boot with the latest set in your git repo, but the Ethernet
> > doesn't apparently fully operate.  I don't get errors, but I cannot
> > get a dhcp address.
> >
> > I'll try to do a more exhaustive test later today to get an idea of
> > what works and what doesn't.  When I ran my basic tests, I just did a
> > feel-good boot test (and reboot test)
> >
> > adam
>
> FYI: manually calling clk_prepare_enable() in the davinci_mdio driver
> seems to at least fix the ethernet. In master branch it's done by
> pm_runtime_get_sync() (in davinci_mdio_reset()). However I'm still
> getting several oopses and WARNs so there's some more work to do.

Hmm... I'm wondering if we need to also add #power-domain-cells to the
PSC clocks and power-domains properties to the consumers.

For this specific case though, it seems strange to me that the drivers
to clk_get() and clk_get_rate() but never enable the clocks.


Also, are the oopses and WARNs the same as before?