Re: [RFC PATCH 00/16] PTI support for x86-32

From: Krzysztof Mazur
Date: Wed Jan 24 2018 - 14:03:46 EST


On Tue, Jan 16, 2018 at 05:36:43PM +0100, Joerg Roedel wrote:
> From: Joerg Roedel <jroedel@xxxxxxx>
>
> Hi,
>
> here is my current WIP code to enable PTI on x86-32. It is
> still in a pretty early state, but it successfully boots my
> KVM guest with PAE and with legacy paging. The existing PTI
> code for x86-64 already prepares a lot of the stuff needed
> for 32 bit too, thanks for that to all the people involved
> in its development :)

Hi,

I've waited for this patches for a long time, until I've tried to
exploit meltdown on some old 32-bit CPUs and failed. Pentium M
seems to speculatively execute the second load with eax
always equal to 0:

movzx (%[addr]), %%eax
shl $12, %%eax
movzx (%[target], %%eax), %%eax

And on Pentium 4-based Xeon the second load seems to be never executed,
even without shift (shifts are slow on some or all Pentium 4's). Maybe
not all P6 and Netbursts CPUs are affected, but I'm not sure. Maybe the
kernel, at least on 32-bit, should try to exploit meltdown to test if
the CPU is really affected.


The series boots on Pentium M (and crashes when I've used perf,
but it is an already known issue). However, I don't like
the performance regression with CONFIG_PAGE_TABLE_ISOLATION=n
(about 7.2%), trivial "benchmark":

--- cut here ---
#include <unistd.h>
#include <fcntl.h>

int main(void)
{
unsigned long i;
int fd;

fd = open("/dev/null", O_WRONLY);
for (i = 0; i < 10000000; i++) {
char x = 0;
write(fd, &x, 1);
}
return 0;
}
--- cut here ---

Time (on Pentium M 1.73 GHz):

baseline (4.15.0-rc8-gdda3e152): 2.415 s (+/- 0.64%)
patched, without CONFIG_PAGE_TABLE_ISOLATION=n 2.588 s (+/- 0.01%)
patched, nopti 2.597 s (+/- 0.31%)
patched, pti 18.272 s
(some older kernel, pre 4.15) 2.378 s

Thanks,
Krzysiek
--
perf results:

baseline:

Performance counter stats for './bench' (5 runs):

2401.539139 task-clock:HG # 0.995 CPUs utilized ( +- 0.23% )
23 context-switches:HG # 0.009 K/sec ( +- 4.02% )
0 cpu-migrations:HG # 0.000 K/sec
30 page-faults:HG # 0.013 K/sec ( +- 1.24% )
4142375834 cycles:HG # 1.725 GHz ( +- 0.23% ) [39.99%]
385110908 stalled-cycles-frontend:HG # 9.30% frontend cycles idle ( +- 0.06% ) [40.01%]
<not supported> stalled-cycles-backend:HG
4142489274 instructions:HG # 1.00 insns per cycle
# 0.09 stalled cycles per insn ( +- 0.00% ) [40.00%]
802270380 branches:HG # 334.065 M/sec ( +- 0.00% ) [40.00%]
34278 branch-misses:HG # 0.00% of all branches ( +- 1.94% ) [40.00%]

2.414741497 seconds time elapsed ( +- 0.64% )

patched, without CONFIG_PAGE_TABLE_ISOLATION=n

Performance counter stats for './bench' (5 runs):

2587.026405 task-clock:HG # 1.000 CPUs utilized ( +- 0.01% )
28 context-switches:HG # 0.011 K/sec ( +- 5.95% )
0 cpu-migrations:HG # 0.000 K/sec
31 page-faults:HG # 0.012 K/sec ( +- 1.21% )
4462401079 cycles:HG # 1.725 GHz ( +- 0.01% ) [39.98%]
388646121 stalled-cycles-frontend:HG # 8.71% frontend cycles idle ( +- 0.05% ) [40.01%]
<not supported> stalled-cycles-backend:HG
4283638646 instructions:HG # 0.96 insns per cycle
# 0.09 stalled cycles per insn ( +- 0.00% ) [40.03%]
822484311 branches:HG # 317.927 M/sec ( +- 0.00% ) [40.01%]
39372 branch-misses:HG # 0.00% of all branches ( +- 2.33% ) [39.98%]

2.587818354 seconds time elapsed ( +- 0.01% )