Re: [RFC PATCH v2 1/1] of: introduce event tracepoints for dynamic device_node lifecyle

[Frank Rowand]

On 01/21/18 06:31, Wolfram Sang wrote:
> From: Tyrel Datwyler <tyreld@xxxxxxxxxxxxxxxxxx>
> 
> This patch introduces event tracepoints for tracking a device_nodes
> reference cycle as well as reconfig notifications generated in response
> to node/property manipulations.
> 
> With the recent upstreaming of the refcount API several device_node
> underflows and leaks have come to my attention in the pseries (DLPAR)
> dynamic logical partitioning code (ie. POWER speak for hotplugging
> virtual and physcial resources at runtime such as cpus or IOAs). These
> tracepoints provide a easy and quick mechanism for validating the
> reference counting of device_nodes during their lifetime.
> 
> Further, when pseries lpars are migrated to a different machine we
> perform a live update of our device tree to bring it into alignment with
> the configuration of the new machine. The of_reconfig_notify trace point
> provides a mechanism that can be turned for debuging the device tree
> modifications with out having to build a custom kernel to get at the
> DEBUG code introduced by commit 00aa37206e1a54 ("of/reconfig: Add debug
> output for OF_RECONFIG notifiers").
> 
> The following trace events are provided: of_node_get, of_node_put,
> of_node_release, and of_reconfig_notify. These trace points require a

Please add a note that the of_reconfig_notify trace event is not an
added bit of debug info, but is instead replacing information that
was previously available via pr_debug() when DEBUG was defined.


> kernel built with ftrace support to be enabled. In a typical environment
> where debugfs is mounted at /sys/kernel/debug the entire set of
> tracepoints can be set with the following:
> 
>   echo "of:*" > /sys/kernel/debug/tracing/set_event
> 
> or
> 
>   echo 1 > /sys/kernel/debug/tracing/events/of/enable
> 
> The following shows the trace point data from a DLPAR remove of a cpu
> from a pseries lpar:
> 
> cat /sys/kernel/debug/tracing/trace | grep "POWER8@10"
> 
> cpuhp/23-147   [023] ....   128.324827:
>         of_node_put: refcount=5, dn->full_name=/cpus/PowerPC,POWER8@10
> cpuhp/23-147   [023] ....   128.324829:
>         of_node_put: refcount=4, dn->full_name=/cpus/PowerPC,POWER8@10
> cpuhp/23-147   [023] ....   128.324829:
>         of_node_put: refcount=3, dn->full_name=/cpus/PowerPC,POWER8@10
> cpuhp/23-147   [023] ....   128.324831:
>         of_node_put: refcount=2, dn->full_name=/cpus/PowerPC,POWER8@10
>    drmgr-7284  [009] ....   128.439000:
>         of_node_put: refcount=1, dn->full_name=/cpus/PowerPC,POWER8@10
>    drmgr-7284  [009] ....   128.439002:
>         of_reconfig_notify: action=DETACH_NODE, dn->full_name=/cpus/PowerPC,POWER8@10,
>                             prop->name=null, old_prop->name=null
>    drmgr-7284  [009] ....   128.439015:
>         of_node_put: refcount=0, dn->full_name=/cpus/PowerPC,POWER8@10
>    drmgr-7284  [009] ....   128.439016:
>         of_node_release: dn->full_name=/cpus/PowerPC,POWER8@10, dn->_flags=4
> 
> Signed-off-by: Tyrel Datwyler <tyreld@xxxxxxxxxxxxxxxxxx>

The following belongs in a list of version 2 changes, below the "---" line:

> [wsa: fixed commit abbrev and one of the sysfs paths in commit desc,
> removed trailing space and fixed pointer declaration in code]

> Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/of/dynamic.c      | 32 ++++++----------
>  include/trace/events/of.h | 93 +++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 105 insertions(+), 20 deletions(-)
>  create mode 100644 include/trace/events/of.h

mode looks incorrect.  Existing files in include/trace/events/ are -rw-rw----


> diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
> index ab988d88704da0..b0d6ab5a35b8c6 100644
> --- a/drivers/of/dynamic.c
> +++ b/drivers/of/dynamic.c
> @@ -21,6 +21,9 @@ static struct device_node *kobj_to_device_node(struct kobject *kobj)
>  	return container_of(kobj, struct device_node, kobj);
>  }
>  
> +#define CREATE_TRACE_POINTS
> +#include <trace/events/of.h>
> +
>  /**
>   * of_node_get() - Increment refcount of a node
>   * @node:	Node to inc refcount, NULL is supported to simplify writing of
> @@ -30,8 +33,10 @@ static struct device_node *kobj_to_device_node(struct kobject *kobj)
>   */
>  struct device_node *of_node_get(struct device_node *node)
>  {
> -	if (node)
> +	if (node) {
>  		kobject_get(&node->kobj);
> +		trace_of_node_get(refcount_read(&node->kobj.kref.refcount), node->full_name);

See the comment from Ron that I mentioned in my previous email.

Also, the path has been removed from node->full_name.  Does using it here
still give all of the information that is desired?  Same for all others uses
of full_name in this patch.

The trace point should have a single argument, node.  Accessing the two
fields can be done in the tracepoint assignment.  Or is there some
reason that can't be done?  Same for the trace_of_node_put() tracepoint.


> +	}
>  	return node;
>  }
>  EXPORT_SYMBOL(of_node_get);
> @@ -43,8 +48,10 @@ EXPORT_SYMBOL(of_node_get);
>   */
>  void of_node_put(struct device_node *node)
>  {
> -	if (node)
> +	if (node) {
> +		trace_of_node_put(refcount_read(&node->kobj.kref.refcount) - 1, node->full_name);

If this is moved down one line to after kobject_put(), then no need
to subtract 1.


>  		kobject_put(&node->kobj);
> +	}
>  }
>  EXPORT_SYMBOL(of_node_put);
>  
> @@ -75,24 +82,7 @@ const char *action_names[] = {
>  int of_reconfig_notify(unsigned long action, struct of_reconfig_data *p)
>  {
>  	int rc;
> -#ifdef DEBUG
> -	struct of_reconfig_data *pr = p;
> -
> -	switch (action) {
> -	case OF_RECONFIG_ATTACH_NODE:
> -	case OF_RECONFIG_DETACH_NODE:
> -		pr_debug("notify %-15s %pOF\n", action_names[action],
> -			pr->dn);
> -		break;
> -	case OF_RECONFIG_ADD_PROPERTY:
> -	case OF_RECONFIG_REMOVE_PROPERTY:
> -	case OF_RECONFIG_UPDATE_PROPERTY:
> -		pr_debug("notify %-15s %pOF:%s\n", action_names[action],
> -			pr->dn, pr->prop->name);
> -		break;
> -
> -	}
> -#endif
> +	trace_of_reconfig_notify(action, p);
>  	rc = blocking_notifier_call_chain(&of_reconfig_chain, action, p);
>  	return notifier_to_errno(rc);
>  }
> @@ -320,6 +310,8 @@ void of_node_release(struct kobject *kobj)
>  {
>  	struct device_node *node = kobj_to_device_node(kobj);
>  
> +	trace_of_node_release(node);
> +
>  	/* We should never be releasing nodes that haven't been detached. */
>  	if (!of_node_check_flag(node, OF_DETACHED)) {
>  		pr_err("ERROR: Bad of_node_put() on %pOF\n", node);
> diff --git a/include/trace/events/of.h b/include/trace/events/of.h
> new file mode 100644
> index 00000000000000..e8b1302a6f0129
> --- /dev/null
> +++ b/include/trace/events/of.h
> @@ -0,0 +1,93 @@
> +#undef TRACE_SYSTEM
> +#define TRACE_SYSTEM of
> +
> +#if !defined(_TRACE_OF_H) || defined(TRACE_HEADER_MULTI_READ)
> +#define _TRACE_OF_H
> +
> +#include <linux/of.h>
> +#include <linux/tracepoint.h>
> +
> +DECLARE_EVENT_CLASS(of_node_ref_template,
> +
> +	TP_PROTO(int refcount, const char *dn_name),
> +
> +	TP_ARGS(refcount, dn_name),
> +
> +	TP_STRUCT__entry(
> +		__string(dn_name, dn_name)
> +		__field(int, refcount)
> +	),
> +
> +	TP_fast_assign(
> +		__assign_str(dn_name, dn_name);
> +		__entry->refcount = refcount;
> +	),
> +
> +	TP_printk("refcount=%d, dn->full_name=%s",

For version 1 of the patch, the example trace output was reformatted
by hand because the lines were so long.  it seems that it is easy to
create long lines and trace output, so extra effort on keeping the
lines shorter is well spent.

A little verbose.  I would prefer to get rid of "refcount=", ",",
and "dn->full_name=" entirely.


> +		  __entry->refcount, __get_str(dn_name))
> +);
> +
> +DEFINE_EVENT(of_node_ref_template, of_node_get,
> +	     TP_PROTO(int refcount, const char *dn_name),
> +	     TP_ARGS(refcount, dn_name));
> +
> +DEFINE_EVENT(of_node_ref_template, of_node_put,
> +	     TP_PROTO(int refcount, const char *dn_name),
> +	     TP_ARGS(refcount, dn_name));
> +
> +TRACE_EVENT(of_node_release,
> +
> +	TP_PROTO(struct device_node *dn),
> +
> +	TP_ARGS(dn),
> +
> +	TP_STRUCT__entry(
> +		__string(dn_name, dn->full_name)
> +		__field(unsigned long, flags)

Does not follow the alignment conventions for files in this directory.

Steve: have you dropped the conventions or are they still relevant?


> +	),
> +
> +	TP_fast_assign(
> +		__assign_str(dn_name, dn->full_name);
> +		__entry->flags = dn->_flags;
> +	),
> +
> +	TP_printk("dn->full_name=%s, dn->_flags=%lu",
> +		  __get_str(dn_name), __entry->flags)

That the first field is the node name should be obvious to the
person reading the trace, so ditch "dn->full_name=".  One
could argue that _flags is not so obvious, but if someone
is looking at why of_node_release() is being called, they
will either care about flag, in which case it will be obvious
that the flag value is being printed, or they won't care
about the flag value and will be ignoring it anyway.  So
I would ditch "dn->-flags=" also.


> +);
> +
> +#define of_reconfig_action_names \
> +	{OF_RECONFIG_ATTACH_NODE, "ATTACH_NODE"}, \
> +	{OF_RECONFIG_DETACH_NODE, "DETACH_NODE"}, \
> +	{OF_RECONFIG_ADD_PROPERTY, "ADD_PROPERTY"}, \
> +	{OF_RECONFIG_REMOVE_PROPERTY, "REMOVE_PROPERTY"}, \
> +	{OF_RECONFIG_UPDATE_PROPERTY, "UPDATE_PROPERTY"}
> +
> +TRACE_EVENT(of_reconfig_notify,
> +
> +	TP_PROTO(unsigned long action, struct of_reconfig_data *ord),
> +
> +	TP_ARGS(action, ord),
> +
> +	TP_STRUCT__entry(
> +		__field(unsigned long, action)
> +		__string(dn_name, ord->dn->full_name)
> +		__string(prop_name, ord->prop ? ord->prop->name : "null")
> +		__string(oldprop_name, ord->old_prop ? ord->old_prop->name : "null")

Does not follow the alignment conventions for files in this directory.


> +	),
> +
> +	TP_fast_assign(
> +		__entry->action = action;
> +		__assign_str(dn_name, ord->dn->full_name);
> +		__assign_str(prop_name, ord->prop ? ord->prop->name : "null");
> +		__assign_str(oldprop_name, ord->old_prop ? ord->old_prop->name : "null");
> +	),
> +
> +	TP_printk("action=%s, dn->full_name=%s, prop->name=%s, old_prop->name=%s",

Isn't old_prop->name the same as prop->name, if old_prop exists?  If so, drop
it.

This is more verbose than the pr_debug() that is being replaced.  Please make
it more compact.


> +		  __print_symbolic(__entry->action, of_reconfig_action_names),
> +		  __get_str(dn_name), __get_str(prop_name), __get_str(oldprop_name))
> +);
> +
> +#endif /*	_TRACE_OF_H */
> +
> +/* This part must be outside protection */
> +#include <trace/define_trace.h>
>