Re: [PATCH 2/2] usb: dwc3: drd: Fix lock-up on ID change during system suspend/resume

[Roger Quadros]

Hi,

On 24/01/18 14:19, Roger Quadros wrote:
> On 23/01/18 14:41, Roger Quadros wrote:
>> Hi Manu,
>>
>> On 23/01/18 05:45, Manu Gautam wrote:
>>> Hi,
>>>
>>>
>>> On 1/22/2018 6:31 PM, Roger Quadros wrote:
>>>> Adding/removing host/gadget controller before .pm_complete()
>>>> causes a lock-up. Let's prevent any dual-role state change
>>>> between .pm_prepare() and .pm_complete() to fix this.
>>>
>>> What kind of lock-up are you seeing? Some hardware lockup or software deadlock?
>>> IMO using a freezable_wq for drd_work should address that?
>>>
>>
>> I was seeing a software deadlock. freezable_wq is a good idea. I'll try it out.
> 
> using freezable_wq doesn't get rid of the deadlock.
> If I use freezable_wq plus add some delay before I do a dwc3_host_init()
> in the work function then it starts to work.
> 
> As dependence on delay looks fragile so I'll stick to the current implementation
> based on .pm_prepare/complete().
> 

So I was able to reproduce the lock up with my series as well. On further investigation
this is what I see.

There are 2 different scenarios.

1) controller in host mode prior to system suspend and switches to device mode during resume.

In this case when we call dwc3_host_exit() before tasks are thawed
xhci_plat_remove() seems to lock up at the second usb_remove_hcd() call.
This issue is resolved by using system_freezable_wq for the _dwc3_set_mode() function.


2) controller in device mode prior to system suspend and switches to host mode during resume.

In this case we sleep indefinitely in _dwc3_set_mode due to
dwc3_set_mode()->dwc3_gadget_exit()->usb_del_gadget_udc()->udc_stop()->dwc3_gadget_stop()->wait_event_lock_irq()

This is not resolved by moving the dwc3_set_mode() call to .pm_complete() nor via the system_freezable_wq.

One way I could fix this is like so.

Felipe, could you please suggest a better way?
Maybe we need to do this in dwc3_gadget_exit() before calling usb_del_gadget_udc() ?

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index b417d9a..0c903c1 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -109,6 +109,7 @@ static void __dwc3_set_mode(struct work_struct *work)
 	struct dwc3 *dwc = work_to_dwc(work);
 	unsigned long flags;
 	int ret;
+	int epnum;
 
 	if (!dwc->desired_dr_role)
 		return;
@@ -124,6 +125,17 @@ static void __dwc3_set_mode(struct work_struct *work)
 		dwc3_host_exit(dwc);
 		break;
 	case DWC3_GCTL_PRTCAP_DEVICE:
+		spin_lock_irqsave(&dwc->lock, flags);
+		for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
+			struct dwc3_ep  *dep = dwc->eps[epnum];
+
+			if (!dep)
+				continue;
+
+			dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
+		}
+		spin_unlock_irqrestore(&dwc->lock, flags);
+
 		dwc3_gadget_exit(dwc);
 		dwc3_event_buffers_cleanup(dwc);
 		break;
-- 

-- 
cheers,
-roger

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki