Re: [linux-sunxi] [PATCH 10/16] iio: adc: sun4i-gpadc-iio: add support for A83T thermal sensor

[OndÅej Jirman]

Hi,

On Fri, Jan 26, 2018 at 04:19:35PM +0100, Philipp Rossak wrote:
> This patch adds support for the A83T ths sensor.
> 
> The A83T does not support interrupts. This seems to be broken.

Though, you use support_irq = true below. And in my tests, IRQ for THS works on
A83T.

regards,
  o.

> The calibration data is writen at the begin of the init process.
> 
> Signed-off-by: Philipp Rossak <embed3d@xxxxxxxxx>
> ---
>  drivers/iio/adc/sun4i-gpadc-iio.c | 38 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
> index f2e0ec65c53e..b8693afcdbea 100644
> --- a/drivers/iio/adc/sun4i-gpadc-iio.c
> +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
> @@ -170,6 +170,40 @@ static const struct gpadc_data sun8i_h3_ths_data = {
>  		SUNXI_THS_TEMP_PERIOD(0x7),
>  };
>  
> +static const struct gpadc_data sun8i_a83t_ths_data = {
> +	.temp_offset = -2724,
> +	.temp_scale = -70,
> +	.temp_data = {SUNXI_THS_TDATA0,
> +		SUNXI_THS_TDATA1,
> +		SUNXI_THS_TDATA2,
> +		0},
> +	.sample_start = sunxi_ths_sample_start,
> +	.sample_end = sunxi_ths_sample_end,
> +	.sensor_count = 3,
> +	.supports_nvmem = false,
> +	.support_irq = true,
> +	.ctrl0_map = SUNXI_THS_ACQ0(0x1f3),
> +	.ctrl2_map = SUNXI_THS_ACQ1(0x1f3),
> +	.sensor_en_map = SUNXI_THS_TEMP_SENSE_EN0 |
> +		SUNXI_THS_TEMP_SENSE_EN1 |
> +		SUNXI_THS_TEMP_SENSE_EN2,
> +	.filter_map = SUNXI_THS_FILTER_EN |
> +		SUNXI_THS_FILTER_TYPE(0x2),
> +	.irq_clear_map = SUNXI_THS_INTS_ALARM_INT_0 |
> +		SUNXI_THS_INTS_ALARM_INT_1 |
> +		SUNXI_THS_INTS_ALARM_INT_2 |
> +		SUNXI_THS_INTS_SHUT_INT_0  |
> +		SUNXI_THS_INTS_SHUT_INT_1  |
> +		SUNXI_THS_INTS_SHUT_INT_2  |
> +		SUNXI_THS_INTS_TDATA_IRQ_0 |
> +		SUNXI_THS_INTS_TDATA_IRQ_1 |
> +		SUNXI_THS_INTS_TDATA_IRQ_2,
> +	.irq_control_map = SUNXI_THS_INTC_TDATA_IRQ_EN0 |
> +		SUNXI_THS_INTC_TDATA_IRQ_EN1 |
> +		SUNXI_THS_INTC_TDATA_IRQ_EN2 |
> +		SUNXI_THS_TEMP_PERIOD(0x257),
> +};
> +
>  struct sun4i_gpadc_iio {
>  	struct iio_dev			*indio_dev;
>  	struct completion		completion;
> @@ -672,6 +706,10 @@ static const struct of_device_id sun4i_gpadc_of_id[] = {
>  		.compatible = "allwinner,sun8i-h3-ths",
>  		.data = &sun8i_h3_ths_data,
>  	},
> +	{
> +		.compatible = "allwinner,sun8i-a83t-ths",
> +		.data = &sun8i_a83t_ths_data,
> +	},
>  	{ /* sentinel */ }
>  };
>  
> -- 
> 2.11.0
> 
> -- 
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxxx
> For more options, visit https://groups.google.com/d/optout.