[PATCH 4.4] usbip: vhci_hcd: clear just the USB_PORT_STAT_POWER bit

[Shuah Khan]

Upstream commit 1c9de5bf4286 ("usbip: vhci-hcd: Add USB3 SuperSpeed
support")

vhci_hcd clears all the bits port_status bits instead of clearing
just the USB_PORT_STAT_POWER bit when it handles ClearPortFeature:
USB_PORT_FEAT_POWER. This causes vhci_hcd attach to fail in a bad
state, leaving device unusable by the client. The device is still
attached and however client can't use it.

The problem was fixed as part of larger change to add  USB3 Super
Speed support. This patch backports just the change to clear the
USB_PORT_STAT_POWER.

In addition, a minor formatting error in status file is fixed.

Signed-off-by: Shuah Khan <shuahkh@xxxxxxxxxxxxxxx>
---
 drivers/usb/usbip/vhci_hcd.c   | 2 +-
 drivers/usb/usbip/vhci_sysfs.c | 5 ++---
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 00d68945548e..2d96bfd34138 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -285,7 +285,7 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		case USB_PORT_FEAT_POWER:
 			usbip_dbg_vhci_rh(
 				" ClearPortFeature: USB_PORT_FEAT_POWER\n");
-			dum->port_status[rhport] = 0;
+			dum->port_status[rhport] &= ~USB_PORT_STAT_POWER;
 			dum->resuming = 0;
 			break;
 		case USB_PORT_FEAT_C_RESET:
diff --git a/drivers/usb/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c
index 1c7f41a65565..ebf133c9eea3 100644
--- a/drivers/usb/usbip/vhci_sysfs.c
+++ b/drivers/usb/usbip/vhci_sysfs.c
@@ -53,7 +53,7 @@ static ssize_t status_show(struct device *dev, struct device_attribute *attr,
 	 * a security hole, the change is made to use sockfd instead.
 	 */
 	out += sprintf(out,
-		       "prt sta spd bus dev sockfd local_busid\n");
+		       "prt sta spd dev      sockfd local_busid\n");
 
 	for (i = 0; i < VHCI_NPORTS; i++) {
 		struct vhci_device *vdev = port_to_vdev(i);
@@ -64,8 +64,7 @@ static ssize_t status_show(struct device *dev, struct device_attribute *attr,
 		if (vdev->ud.status == VDEV_ST_USED) {
 			out += sprintf(out, "%03u %08x ",
 				       vdev->speed, vdev->devid);
-			out += sprintf(out, "%16p ", vdev->ud.tcp_socket);
-			out += sprintf(out, "%06u", vdev->ud.sockfd);
+			out += sprintf(out, "%06u ", vdev->ud.sockfd);
 			out += sprintf(out, "%s", dev_name(&vdev->udev->dev));
 
 		} else
-- 
2.14.1