[tip:perf/core] perf vendor events intel: Update SkylakeX events to V1.06

From: tip-bot for Andi Kleen
Date: Sun Jan 28 2018 - 16:16:14 EST

Next message: tip-bot for Andi Kleen: "[tip:perf/core] perf vendor events intel: Update BroadwellDE events to V7"
Previous message: tip-bot for Andi Kleen: "[tip:perf/core] perf vendor events intel: Update Skylake events to V36"
In reply to: tip-bot for Andi Kleen: "[tip:perf/core] perf vendor events intel: Update SkylakeX events to V1.06"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Commit-ID: 1716021e2e88a284cc737db40524734dffea2de5
Gitweb: https://git.kernel.org/tip/1716021e2e88a284cc737db40524734dffea2de5
Author: Andi Kleen <ak@xxxxxxxxxxxxxxx>
AuthorDate: Thu, 18 Jan 2018 04:54:25 -0800
Committer: Arnaldo Carvalho de Melo <acme@xxxxxxxxxx>
CommitDate: Thu, 25 Jan 2018 06:37:12 -0300

perf vendor events intel: Update SkylakeX events to V1.06

Signed-off-by: Andi Kleen <ak@xxxxxxxxxxxxxxx>
Link: https://lkml.kernel.org/r/20180118234518.GA27753@xxxxxxxxxxxxxxxxxxxx
Signed-off-by: Arnaldo Carvalho de Melo <acme@xxxxxxxxxx>
---
tools/perf/pmu-events/arch/x86/skylakex/cache.json | 257 +++++++++++++--------
.../arch/x86/skylakex/floating-point.json | 3 +-
.../pmu-events/arch/x86/skylakex/frontend.json | 48 ++--
.../perf/pmu-events/arch/x86/skylakex/memory.json | 231 ++++++++++++------
tools/perf/pmu-events/arch/x86/skylakex/other.json | 94 +++++++-
.../pmu-events/arch/x86/skylakex/pipeline.json | 44 ++--
.../arch/x86/skylakex/virtual-memory.json | 42 ++--
7 files changed, 482 insertions(+), 237 deletions(-)

diff --git a/tools/perf/pmu-events/arch/x86/skylakex/cache.json b/tools/perf/pmu-events/arch/x86/skylakex/cache.json
index b5bc742..5c99408 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/cache.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/cache.json
@@ -265,7 +265,7 @@
{
"EventCode": "0x60",
"UMask": "0x2",
- "BriefDescription": "Offcore outstanding Code Reads transactions in the SuperQueue (SQ), queue to uncore, every cycle. ",
+ "BriefDescription": "Offcore outstanding Code Reads transactions in the SuperQueue (SQ), queue to uncore, every cycle.",
"Counter": "0,1,2,3",
"EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_CODE_RD",
"PublicDescription": "Counts the number of offcore outstanding Code Reads transactions in the super queue every cycle. The 'Offcore outstanding' state of the transaction lasts from the L2 miss until the sending transaction completion to requestor (SQ deallocation). See the corresponding Umask under OFFCORE_REQUESTS.",
@@ -398,22 +398,24 @@
{
"EventCode": "0xD0",
"UMask": "0x11",
- "BriefDescription": "Retired load instructions that miss the STLB.",
+ "BriefDescription": "Retired load instructions that miss the STLB. (Precise Event)",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_INST_RETIRED.STLB_MISS_LOADS",
+ "PublicDescription": "Retired load instructions that miss the STLB.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD0",
"UMask": "0x12",
- "BriefDescription": "Retired store instructions that miss the STLB.",
+ "BriefDescription": "Retired store instructions that miss the STLB. (Precise Event)",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_INST_RETIRED.STLB_MISS_STORES",
+ "PublicDescription": "Retired store instructions that miss the STLB.",
"SampleAfterValue": "100003",
"L1_Hit_Indication": "1",
"CounterHTOff": "0,1,2,3"
@@ -421,7 +423,7 @@
{
"EventCode": "0xD0",
"UMask": "0x21",
- "BriefDescription": "Retired load instructions with locked access.",
+ "BriefDescription": "Retired load instructions with locked access. (Precise Event)",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
@@ -432,24 +434,22 @@
{
"EventCode": "0xD0",
"UMask": "0x41",
- "BriefDescription": "Retired load instructions that split across a cacheline boundary.",
+ "BriefDescription": "Retired load instructions that split across a cacheline boundary. (Precise Event)",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_INST_RETIRED.SPLIT_LOADS",
- "PublicDescription": "Counts retired load instructions that split across a cacheline boundary.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xD0",
"UMask": "0x42",
- "BriefDescription": "Retired store instructions that split across a cacheline boundary.",
+ "BriefDescription": "Retired store instructions that split across a cacheline boundary. (Precise Event)",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_INST_RETIRED.SPLIT_STORES",
- "PublicDescription": "Counts retired store instructions that split across a cacheline boundary.",
"SampleAfterValue": "100003",
"L1_Hit_Indication": "1",
"CounterHTOff": "0,1,2,3"
@@ -457,7 +457,7 @@
{
"EventCode": "0xD0",
"UMask": "0x81",
- "BriefDescription": "All retired load instructions.",
+ "BriefDescription": "All retired load instructions. (Precise Event)",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
@@ -468,11 +468,12 @@
{
"EventCode": "0xD0",
"UMask": "0x82",
- "BriefDescription": "All retired store instructions.",
+ "BriefDescription": "All retired store instructions. (Precise Event)",
"Data_LA": "1",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_INST_RETIRED.ALL_STORES",
+ "PublicDescription": "All retired store instructions.",
"SampleAfterValue": "2000003",
"L1_Hit_Indication": "1",
"CounterHTOff": "0,1,2,3"
@@ -485,7 +486,7 @@
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_RETIRED.L1_HIT",
- "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.",
+ "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.\r\n",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3"
},
@@ -509,7 +510,7 @@
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_RETIRED.L3_HIT",
- "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L3 cache. ",
+ "PublicDescription": "Retired load instructions with L3 cache hits as data sources.",
"SampleAfterValue": "50021",
"CounterHTOff": "0,1,2,3"
},
@@ -545,7 +546,7 @@
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_RETIRED.L3_MISS",
- "PublicDescription": "Counts retired load instructions with at least one uop that missed in the L3 cache. ",
+ "PublicDescription": "Retired load instructions missed L3 cache as data sources.",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3"
},
@@ -557,7 +558,7 @@
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_RETIRED.FB_HIT",
- "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready. ",
+ "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready. \r\n",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3"
},
@@ -616,7 +617,6 @@
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_L3_MISS_RETIRED.LOCAL_DRAM",
- "PublicDescription": "Retired load instructions which data sources missed L3 but serviced from local DRAM.",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3"
},
@@ -639,7 +639,6 @@
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_HITM",
- "PublicDescription": "Retired load instructions whose data sources was remote HITM.",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3"
},
@@ -648,9 +647,9 @@
"UMask": "0x8",
"BriefDescription": "Retired load instructions whose data sources was forwarded from a remote cache",
"Data_LA": "1",
+ "PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_FWD",
- "PublicDescription": "Retired load instructions whose data sources was forwarded from a remote cache.",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3"
},
@@ -697,7 +696,7 @@
{
"EventCode": "0xF2",
"UMask": "0x2",
- "BriefDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3. Clean lines may either be allocated in L3 or dropped ",
+ "BriefDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3. Clean lines may either be allocated in L3 or dropped",
"Counter": "0,1,2,3",
"EventName": "L2_LINES_OUT.NON_SILENT",
"PublicDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3. Clean lines may either be allocated in L3 or dropped.",
@@ -742,7 +741,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts demand data reads that have any response type.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts demand data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -755,7 +754,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -768,7 +767,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -781,7 +780,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "tbd; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -794,7 +793,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -807,7 +806,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts demand data reads that hit in the L3.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts demand data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -820,7 +819,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand data writes (RFOs) that have any response type.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand data writes (RFOs) that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -833,7 +832,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -846,7 +845,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -859,7 +858,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "tbd; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -872,7 +871,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -885,7 +884,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand data writes (RFOs) that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -898,7 +897,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand code reads that have any response type.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand code reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -911,7 +910,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -924,7 +923,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -937,7 +936,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "tbd; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -950,7 +949,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -963,7 +962,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand code reads that hit in the L3.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand code reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -976,7 +975,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch (that bring data to L2) data reads that have any response type.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts prefetch (that bring data to L2) data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -989,7 +988,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1002,7 +1001,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1015,7 +1014,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "tbd; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1028,7 +1027,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1041,7 +1040,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1054,7 +1053,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that have any response type.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1067,7 +1066,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1080,7 +1079,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1093,7 +1092,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "tbd; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1106,7 +1105,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1119,7 +1118,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1132,7 +1131,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that have any response type.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1145,7 +1144,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1158,7 +1157,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1171,7 +1170,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "tbd; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1184,7 +1183,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1197,7 +1196,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1210,7 +1209,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that have any response type.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1223,7 +1222,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1236,7 +1235,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1249,7 +1248,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "tbd; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1262,7 +1261,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1275,7 +1274,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1288,7 +1287,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that have any response type.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1301,7 +1300,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1314,7 +1313,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1327,7 +1326,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "tbd; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1340,7 +1339,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1353,7 +1352,85 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "SampleAfterValue": "100003",
+ "CounterHTOff": "0,1,2,3"
+ },
+ {
+ "Offcore": "1",
+ "EventCode": "0xB7, 0xBB",
+ "UMask": "0x1",
+ "BriefDescription": "Counts any other requests that have any response type.",
+ "MSRValue": "0x0000018000 ",
+ "Counter": "0,1,2,3",
+ "EventName": "OFFCORE_RESPONSE.OTHER.ANY_RESPONSE",
+ "MSRIndex": "0x1a6,0x1a7",
+ "PublicDescription": "Counts any other requests that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "SampleAfterValue": "100003",
+ "CounterHTOff": "0,1,2,3"
+ },
+ {
+ "Offcore": "1",
+ "EventCode": "0xB7, 0xBB",
+ "UMask": "0x1",
+ "BriefDescription": "Counts any other requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+ "MSRValue": "0x01003c8000 ",
+ "Counter": "0,1,2,3",
+ "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.NO_SNOOP_NEEDED",
+ "MSRIndex": "0x1a6,0x1a7",
+ "PublicDescription": "Counts any other requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "SampleAfterValue": "100003",
+ "CounterHTOff": "0,1,2,3"
+ },
+ {
+ "Offcore": "1",
+ "EventCode": "0xB7, 0xBB",
+ "UMask": "0x1",
+ "BriefDescription": "Counts any other requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+ "MSRValue": "0x04003c8000 ",
+ "Counter": "0,1,2,3",
+ "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+ "MSRIndex": "0x1a6,0x1a7",
+ "PublicDescription": "Counts any other requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "SampleAfterValue": "100003",
+ "CounterHTOff": "0,1,2,3"
+ },
+ {
+ "Offcore": "1",
+ "EventCode": "0xB7, 0xBB",
+ "UMask": "0x1",
+ "BriefDescription": "OTHER & L3_HIT & SNOOP_HIT_WITH_FWD",
+ "MSRValue": "0x08003c8000 ",
+ "Counter": "0,1,2,3",
+ "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_HIT_WITH_FWD",
+ "MSRIndex": "0x1a6,0x1a7",
+ "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "SampleAfterValue": "100003",
+ "CounterHTOff": "0,1,2,3"
+ },
+ {
+ "Offcore": "1",
+ "EventCode": "0xB7, 0xBB",
+ "UMask": "0x1",
+ "BriefDescription": "Counts any other requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+ "MSRValue": "0x10003c8000 ",
+ "Counter": "0,1,2,3",
+ "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.HITM_OTHER_CORE",
+ "MSRIndex": "0x1a6,0x1a7",
+ "PublicDescription": "Counts any other requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "SampleAfterValue": "100003",
+ "CounterHTOff": "0,1,2,3"
+ },
+ {
+ "Offcore": "1",
+ "EventCode": "0xB7, 0xBB",
+ "UMask": "0x1",
+ "BriefDescription": "Counts any other requests that hit in the L3.",
+ "MSRValue": "0x3f803c8000 ",
+ "Counter": "0,1,2,3",
+ "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.ANY_SNOOP",
+ "MSRIndex": "0x1a6,0x1a7",
+ "PublicDescription": "Counts any other requests that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1366,7 +1443,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch data reads that have any response type.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1379,7 +1456,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1392,7 +1469,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1405,7 +1482,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "tbd; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1418,7 +1495,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1431,7 +1508,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch data reads that hit in the L3.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all prefetch data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1444,7 +1521,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch RFOs that have any response type.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts prefetch RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1457,7 +1534,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1470,7 +1547,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1483,7 +1560,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "tbd; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1496,7 +1573,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1509,7 +1586,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch RFOs that hit in the L3.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts prefetch RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1522,7 +1599,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that have any response type.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch data reads that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1535,7 +1612,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1548,7 +1625,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1561,7 +1638,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "tbd; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1574,7 +1651,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1587,7 +1664,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch data reads that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1600,7 +1677,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.ANY_RESPONSE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch RFOs that have any response type.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch RFOs that have any response type. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1613,7 +1690,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1626,7 +1703,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1639,7 +1716,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "tbd; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1652,7 +1729,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HITM_OTHER_CORE",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1665,7 +1742,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3.; Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "PublicDescription": "Counts all demand & prefetch RFOs that hit in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
}
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/floating-point.json b/tools/perf/pmu-events/arch/x86/skylakex/floating-point.json
index 1c09a32..286ed1a 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/floating-point.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/floating-point.json
@@ -29,10 +29,9 @@
{
"EventCode": "0xC7",
"UMask": "0x8",
- "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. ",
+ "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
"Counter": "0,1,2,3",
"EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE",
- "PublicDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/frontend.json b/tools/perf/pmu-events/arch/x86/skylakex/frontend.json
index 40abc08..403a4f8 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/frontend.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/frontend.json
@@ -182,7 +182,7 @@
"BriefDescription": "Uops not delivered to Resource Allocation Table (RAT) per thread when backend of the machine is not stalled",
"Counter": "0,1,2,3",
"EventName": "IDQ_UOPS_NOT_DELIVERED.CORE",
- "PublicDescription": "Counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding \u201c4 \u2013 x\u201d when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when: a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread. b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions). c. Instruction Decode Queue (IDQ) delivers four uops.",
+ "PublicDescription": "Counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding 4 x when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when: a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread. b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions). c. Instruction Decode Queue (IDQ) delivers four uops.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -247,20 +247,20 @@
"BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles.",
"Counter": "0,1,2,3",
"EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES",
- "PublicDescription": "Counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. MM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.Penalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 0\u20132 cycles.",
+ "PublicDescription": "Counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. MM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.Penalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 02 cycles.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0xC6",
"UMask": "0x1",
- "BriefDescription": "Retired Instructions who experienced decode stream buffer (DSB - the decoded instruction-cache) miss.",
+ "BriefDescription": "Retired Instructions who experienced decode stream buffer (DSB - the decoded instruction-cache) miss. Precise Event.",
"PEBS": "1",
"MSRValue": "0x11",
"Counter": "0,1,2,3",
"EventName": "FRONTEND_RETIRED.DSB_MISS",
"MSRIndex": "0x3F7",
- "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss. ",
+ "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss. \r\n",
"TakenAlone": "1",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3"
@@ -268,7 +268,7 @@
{
"EventCode": "0xC6",
"UMask": "0x1",
- "BriefDescription": "Retired Instructions who experienced Instruction L1 Cache true miss.",
+ "BriefDescription": "Retired Instructions who experienced Instruction L1 Cache true miss. Precise Event.",
"PEBS": "1",
"MSRValue": "0x12",
"Counter": "0,1,2,3",
@@ -281,7 +281,7 @@
{
"EventCode": "0xC6",
"UMask": "0x1",
- "BriefDescription": "Retired Instructions who experienced Instruction L2 Cache true miss.",
+ "BriefDescription": "Retired Instructions who experienced Instruction L2 Cache true miss. Precise Event.",
"PEBS": "1",
"MSRValue": "0x13",
"Counter": "0,1,2,3",
@@ -294,7 +294,7 @@
{
"EventCode": "0xC6",
"UMask": "0x1",
- "BriefDescription": "Retired Instructions who experienced iTLB true miss.",
+ "BriefDescription": "Retired Instructions who experienced iTLB true miss. Precise Event.",
"PEBS": "1",
"MSRValue": "0x14",
"Counter": "0,1,2,3",
@@ -308,13 +308,13 @@
{
"EventCode": "0xC6",
"UMask": "0x1",
- "BriefDescription": "Retired Instructions who experienced STLB (2nd level TLB) true miss.",
+ "BriefDescription": "Retired Instructions who experienced STLB (2nd level TLB) true miss. Precise Event.",
"PEBS": "1",
"MSRValue": "0x15",
"Counter": "0,1,2,3",
"EventName": "FRONTEND_RETIRED.STLB_MISS",
"MSRIndex": "0x3F7",
- "PublicDescription": "Counts retired Instructions that experienced STLB (2nd level TLB) true miss. ",
+ "PublicDescription": "Counts retired Instructions that experienced STLB (2nd level TLB) true miss.",
"TakenAlone": "1",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3"
@@ -322,7 +322,7 @@
{
"EventCode": "0xC6",
"UMask": "0x1",
- "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 2 cycles which was not interrupted by a back-end stall.",
+ "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 2 cycles which was not interrupted by a back-end stall. Precise Event.",
"PEBS": "1",
"MSRValue": "0x400206",
"Counter": "0,1,2,3",
@@ -335,7 +335,7 @@
{
"EventCode": "0xC6",
"UMask": "0x1",
- "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 2 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall.",
+ "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 2 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall. Precise Event.",
"PEBS": "1",
"MSRValue": "0x200206",
"Counter": "0,1,2,3",
@@ -348,7 +348,7 @@
{
"EventCode": "0xC6",
"UMask": "0x1",
- "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 4 cycles which was not interrupted by a back-end stall.",
+ "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 4 cycles which was not interrupted by a back-end stall. Precise Event.",
"PEBS": "1",
"MSRValue": "0x400406",
"Counter": "0,1,2,3",
@@ -367,7 +367,7 @@
"Counter": "0,1,2,3",
"EventName": "FRONTEND_RETIRED.LATENCY_GE_8",
"MSRIndex": "0x3F7",
- "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 8 cycles. During this period the front-end delivered no uops.",
+ "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 8 cycles. During this period the front-end delivered no uops. \r\n",
"TakenAlone": "1",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3"
@@ -375,13 +375,13 @@
{
"EventCode": "0xC6",
"UMask": "0x1",
- "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 16 cycles which was not interrupted by a back-end stall.",
+ "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 16 cycles which was not interrupted by a back-end stall. Precise Event.",
"PEBS": "1",
"MSRValue": "0x401006",
"Counter": "0,1,2,3",
"EventName": "FRONTEND_RETIRED.LATENCY_GE_16",
"MSRIndex": "0x3F7",
- "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 16 cycles. During this period the front-end delivered no uops.",
+ "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 16 cycles. During this period the front-end delivered no uops.\r\n",
"TakenAlone": "1",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3"
@@ -389,13 +389,13 @@
{
"EventCode": "0xC6",
"UMask": "0x1",
- "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 32 cycles which was not interrupted by a back-end stall.",
+ "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 32 cycles which was not interrupted by a back-end stall. Precise Event.",
"PEBS": "1",
"MSRValue": "0x402006",
"Counter": "0,1,2,3",
"EventName": "FRONTEND_RETIRED.LATENCY_GE_32",
"MSRIndex": "0x3F7",
- "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 32 cycles. During this period the front-end delivered no uops.",
+ "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 32 cycles. During this period the front-end delivered no uops.\r\n",
"TakenAlone": "1",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3"
@@ -403,7 +403,7 @@
{
"EventCode": "0xC6",
"UMask": "0x1",
- "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 64 cycles which was not interrupted by a back-end stall.",
+ "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 64 cycles which was not interrupted by a back-end stall. Precise Event.",
"PEBS": "1",
"MSRValue": "0x404006",
"Counter": "0,1,2,3",
@@ -416,7 +416,7 @@
{
"EventCode": "0xC6",
"UMask": "0x1",
- "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 128 cycles which was not interrupted by a back-end stall.",
+ "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 128 cycles which was not interrupted by a back-end stall. Precise Event.",
"PEBS": "1",
"MSRValue": "0x408006",
"Counter": "0,1,2,3",
@@ -429,7 +429,7 @@
{
"EventCode": "0xC6",
"UMask": "0x1",
- "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 256 cycles which was not interrupted by a back-end stall.",
+ "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 256 cycles which was not interrupted by a back-end stall. Precise Event.",
"PEBS": "1",
"MSRValue": "0x410006",
"Counter": "0,1,2,3",
@@ -442,7 +442,7 @@
{
"EventCode": "0xC6",
"UMask": "0x1",
- "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 512 cycles which was not interrupted by a back-end stall.",
+ "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 512 cycles which was not interrupted by a back-end stall. Precise Event.",
"PEBS": "1",
"MSRValue": "0x420006",
"Counter": "0,1,2,3",
@@ -455,13 +455,13 @@
{
"EventCode": "0xC6",
"UMask": "0x1",
- "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 1 bubble-slot for a period of 2 cycles which was not interrupted by a back-end stall.",
+ "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 1 bubble-slot for a period of 2 cycles which was not interrupted by a back-end stall. Precise Event.",
"PEBS": "1",
"MSRValue": "0x100206",
"Counter": "0,1,2,3",
"EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_1",
"MSRIndex": "0x3F7",
- "PublicDescription": "Counts retired instructions that are delivered to the back-end after the front-end had at least 1 bubble-slot for a period of 2 cycles. A bubble-slot is an empty issue-pipeline slot while there was no RAT stall.",
+ "PublicDescription": "Counts retired instructions that are delivered to the back-end after the front-end had at least 1 bubble-slot for a period of 2 cycles. A bubble-slot is an empty issue-pipeline slot while there was no RAT stall.\r\n",
"TakenAlone": "1",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3"
@@ -469,7 +469,7 @@
{
"EventCode": "0xC6",
"UMask": "0x1",
- "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 3 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall.",
+ "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 3 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall. Precise Event.",
"PEBS": "1",
"MSRValue": "0x300206",
"Counter": "0,1,2,3",
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/memory.json b/tools/perf/pmu-events/arch/x86/skylakex/memory.json
index ca22a22..e7f1aa3 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/memory.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/memory.json
@@ -214,7 +214,7 @@
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "HLE_RETIRED.ABORTED",
- "PublicDescription": "Number of times HLE abort was triggered.",
+ "PublicDescription": "Number of times HLE abort was triggered. (PEBS)",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -239,10 +239,9 @@
{
"EventCode": "0xC8",
"UMask": "0x20",
- "BriefDescription": "Number of times an HLE execution aborted due to HLE-unfriendly instructions and certain unfriendly events (such as AD assists etc.). ",
+ "BriefDescription": "Number of times an HLE execution aborted due to HLE-unfriendly instructions and certain unfriendly events (such as AD assists etc.).",
"Counter": "0,1,2,3",
"EventName": "HLE_RETIRED.ABORTED_UNFRIENDLY",
- "PublicDescription": "Number of times an HLE execution aborted due to HLE-unfriendly instructions and certain unfriendly events (such as AD assists etc.).",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -292,7 +291,7 @@
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "RTM_RETIRED.ABORTED",
- "PublicDescription": "Number of times RTM abort was triggered.",
+ "PublicDescription": "Number of times RTM abort was triggered. (PEBS)",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -466,7 +465,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts demand data reads that miss in the L3. ",
+ "PublicDescription": "Counts demand data reads that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -479,7 +478,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts demand data reads that miss the L3 and clean or shared data is transferred from remote cache. ",
+ "PublicDescription": "Counts demand data reads that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -492,7 +491,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts demand data reads that miss the L3 and the modified data is transferred from remote cache. ",
+ "PublicDescription": "Counts demand data reads that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -505,7 +504,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts demand data reads that miss the L3 and the data is returned from local or remote dram. ",
+ "PublicDescription": "Counts demand data reads that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -518,7 +517,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts demand data reads that miss the L3 and the data is returned from remote dram. ",
+ "PublicDescription": "Counts demand data reads that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -531,7 +530,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts demand data reads that miss the L3 and the data is returned from local dram. ",
+ "PublicDescription": "Counts demand data reads that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -544,7 +543,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand data writes (RFOs) that miss in the L3. ",
+ "PublicDescription": "Counts all demand data writes (RFOs) that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -557,7 +556,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and clean or shared data is transferred from remote cache. ",
+ "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -570,7 +569,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the modified data is transferred from remote cache. ",
+ "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -583,7 +582,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from local or remote dram. ",
+ "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -596,7 +595,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from remote dram. ",
+ "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -609,7 +608,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from local dram. ",
+ "PublicDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -622,7 +621,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand code reads that miss in the L3. ",
+ "PublicDescription": "Counts all demand code reads that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -635,7 +634,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand code reads that miss the L3 and clean or shared data is transferred from remote cache. ",
+ "PublicDescription": "Counts all demand code reads that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -648,7 +647,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand code reads that miss the L3 and the modified data is transferred from remote cache. ",
+ "PublicDescription": "Counts all demand code reads that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -661,7 +660,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand code reads that miss the L3 and the data is returned from local or remote dram. ",
+ "PublicDescription": "Counts all demand code reads that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -674,7 +673,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand code reads that miss the L3 and the data is returned from remote dram. ",
+ "PublicDescription": "Counts all demand code reads that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -687,7 +686,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand code reads that miss the L3 and the data is returned from local dram. ",
+ "PublicDescription": "Counts all demand code reads that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -700,7 +699,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss in the L3. ",
+ "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -713,7 +712,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and clean or shared data is transferred from remote cache. ",
+ "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -726,7 +725,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the modified data is transferred from remote cache. ",
+ "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -739,7 +738,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from local or remote dram. ",
+ "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -752,7 +751,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from remote dram. ",
+ "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -765,7 +764,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from local dram. ",
+ "PublicDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -778,7 +777,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss in the L3. ",
+ "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -791,7 +790,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and clean or shared data is transferred from remote cache. ",
+ "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -804,7 +803,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the modified data is transferred from remote cache. ",
+ "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -817,7 +816,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from local or remote dram. ",
+ "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -830,7 +829,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from remote dram. ",
+ "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -843,7 +842,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from local dram. ",
+ "PublicDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -856,7 +855,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss in the L3. ",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -869,7 +868,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and clean or shared data is transferred from remote cache. ",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -882,7 +881,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the modified data is transferred from remote cache. ",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -895,7 +894,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from local or remote dram. ",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -908,7 +907,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from remote dram. ",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -921,7 +920,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from local dram. ",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -934,7 +933,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss in the L3. ",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -947,7 +946,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and clean or shared data is transferred from remote cache. ",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -960,7 +959,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the modified data is transferred from remote cache. ",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -973,7 +972,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the data is returned from local or remote dram. ",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -986,7 +985,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the data is returned from remote dram. ",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -999,7 +998,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the data is returned from local dram. ",
+ "PublicDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1012,7 +1011,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss in the L3. ",
+ "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1025,7 +1024,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and clean or shared data is transferred from remote cache. ",
+ "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1038,7 +1037,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the modified data is transferred from remote cache. ",
+ "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1051,7 +1050,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from local or remote dram. ",
+ "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1064,7 +1063,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from remote dram. ",
+ "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1077,7 +1076,85 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from local dram. ",
+ "PublicDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "SampleAfterValue": "100003",
+ "CounterHTOff": "0,1,2,3"
+ },
+ {
+ "Offcore": "1",
+ "EventCode": "0xB7, 0xBB",
+ "UMask": "0x1",
+ "BriefDescription": "Counts any other requests that miss in the L3.",
+ "MSRValue": "0x3fbc008000 ",
+ "Counter": "0,1,2,3",
+ "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.ANY_SNOOP",
+ "MSRIndex": "0x1a6,0x1a7",
+ "PublicDescription": "Counts any other requests that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "SampleAfterValue": "100003",
+ "CounterHTOff": "0,1,2,3"
+ },
+ {
+ "Offcore": "1",
+ "EventCode": "0xB7, 0xBB",
+ "UMask": "0x1",
+ "BriefDescription": "Counts any other requests that miss the L3 and clean or shared data is transferred from remote cache.",
+ "MSRValue": "0x083fc08000 ",
+ "Counter": "0,1,2,3",
+ "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.REMOTE_HIT_FORWARD",
+ "MSRIndex": "0x1a6,0x1a7",
+ "PublicDescription": "Counts any other requests that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "SampleAfterValue": "100003",
+ "CounterHTOff": "0,1,2,3"
+ },
+ {
+ "Offcore": "1",
+ "EventCode": "0xB7, 0xBB",
+ "UMask": "0x1",
+ "BriefDescription": "Counts any other requests that miss the L3 and the modified data is transferred from remote cache.",
+ "MSRValue": "0x103fc08000 ",
+ "Counter": "0,1,2,3",
+ "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.REMOTE_HITM",
+ "MSRIndex": "0x1a6,0x1a7",
+ "PublicDescription": "Counts any other requests that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "SampleAfterValue": "100003",
+ "CounterHTOff": "0,1,2,3"
+ },
+ {
+ "Offcore": "1",
+ "EventCode": "0xB7, 0xBB",
+ "UMask": "0x1",
+ "BriefDescription": "Counts any other requests that miss the L3 and the data is returned from local or remote dram.",
+ "MSRValue": "0x063fc08000 ",
+ "Counter": "0,1,2,3",
+ "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SNOOP_MISS_OR_NO_FWD",
+ "MSRIndex": "0x1a6,0x1a7",
+ "PublicDescription": "Counts any other requests that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "SampleAfterValue": "100003",
+ "CounterHTOff": "0,1,2,3"
+ },
+ {
+ "Offcore": "1",
+ "EventCode": "0xB7, 0xBB",
+ "UMask": "0x1",
+ "BriefDescription": "Counts any other requests that miss the L3 and the data is returned from remote dram.",
+ "MSRValue": "0x063b808000 ",
+ "Counter": "0,1,2,3",
+ "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+ "MSRIndex": "0x1a6,0x1a7",
+ "PublicDescription": "Counts any other requests that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+ "SampleAfterValue": "100003",
+ "CounterHTOff": "0,1,2,3"
+ },
+ {
+ "Offcore": "1",
+ "EventCode": "0xB7, 0xBB",
+ "UMask": "0x1",
+ "BriefDescription": "Counts any other requests that miss the L3 and the data is returned from local dram.",
+ "MSRValue": "0x0604008000 ",
+ "Counter": "0,1,2,3",
+ "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+ "MSRIndex": "0x1a6,0x1a7",
+ "PublicDescription": "Counts any other requests that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1090,7 +1167,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch data reads that miss in the L3. ",
+ "PublicDescription": "Counts all prefetch data reads that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1103,7 +1180,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache. ",
+ "PublicDescription": "Counts all prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1116,7 +1193,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch data reads that miss the L3 and the modified data is transferred from remote cache. ",
+ "PublicDescription": "Counts all prefetch data reads that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1129,7 +1206,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch data reads that miss the L3 and the data is returned from local or remote dram. ",
+ "PublicDescription": "Counts all prefetch data reads that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1142,7 +1219,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch data reads that miss the L3 and the data is returned from remote dram. ",
+ "PublicDescription": "Counts all prefetch data reads that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1155,7 +1232,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all prefetch data reads that miss the L3 and the data is returned from local dram. ",
+ "PublicDescription": "Counts all prefetch data reads that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1168,7 +1245,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch RFOs that miss in the L3. ",
+ "PublicDescription": "Counts prefetch RFOs that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1181,7 +1258,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch RFOs that miss the L3 and clean or shared data is transferred from remote cache. ",
+ "PublicDescription": "Counts prefetch RFOs that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1194,7 +1271,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch RFOs that miss the L3 and the modified data is transferred from remote cache. ",
+ "PublicDescription": "Counts prefetch RFOs that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1207,7 +1284,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from local or remote dram. ",
+ "PublicDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1220,7 +1297,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from remote dram. ",
+ "PublicDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1233,7 +1310,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from local dram. ",
+ "PublicDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1246,7 +1323,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that miss in the L3. ",
+ "PublicDescription": "Counts all demand & prefetch data reads that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1259,7 +1336,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache. ",
+ "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1272,7 +1349,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the modified data is transferred from remote cache. ",
+ "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1285,7 +1362,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local or remote dram. ",
+ "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1298,7 +1375,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from remote dram. ",
+ "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1311,7 +1388,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local dram. ",
+ "PublicDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1324,7 +1401,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch RFOs that miss in the L3. ",
+ "PublicDescription": "Counts all demand & prefetch RFOs that miss in the L3. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1337,7 +1414,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.REMOTE_HIT_FORWARD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and clean or shared data is transferred from remote cache. ",
+ "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and clean or shared data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1350,7 +1427,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.REMOTE_HITM",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and the modified data is transferred from remote cache. ",
+ "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and the modified data is transferred from remote cache. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1363,7 +1440,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local or remote dram. ",
+ "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local or remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1376,7 +1453,7 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from remote dram. ",
+ "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from remote dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
@@ -1389,8 +1466,8 @@
"Counter": "0,1,2,3",
"EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
- "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local dram.",
+ "PublicDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local dram. Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
}
-]
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/other.json b/tools/perf/pmu-events/arch/x86/skylakex/other.json
index 70243b0..778a541 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/other.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/other.json
@@ -40,6 +40,42 @@
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
+ "EventCode": "0x32",
+ "UMask": "0x1",
+ "BriefDescription": "Number of PREFETCHNTA instructions executed.",
+ "Counter": "0,1,2,3",
+ "EventName": "SW_PREFETCH_ACCESS.NTA",
+ "SampleAfterValue": "2000003",
+ "CounterHTOff": "0,1,2,3,4,5,6,7"
+ },
+ {
+ "EventCode": "0x32",
+ "UMask": "0x2",
+ "BriefDescription": "Number of PREFETCHT0 instructions executed.",
+ "Counter": "0,1,2,3",
+ "EventName": "SW_PREFETCH_ACCESS.T0",
+ "SampleAfterValue": "2000003",
+ "CounterHTOff": "0,1,2,3,4,5,6,7"
+ },
+ {
+ "EventCode": "0x32",
+ "UMask": "0x4",
+ "BriefDescription": "Number of PREFETCHT1 or PREFETCHT2 instructions executed.",
+ "Counter": "0,1,2,3",
+ "EventName": "SW_PREFETCH_ACCESS.T1_T2",
+ "SampleAfterValue": "2000003",
+ "CounterHTOff": "0,1,2,3,4,5,6,7"
+ },
+ {
+ "EventCode": "0x32",
+ "UMask": "0x8",
+ "BriefDescription": "Number of PREFETCHW instructions executed.",
+ "Counter": "0,1,2,3",
+ "EventName": "SW_PREFETCH_ACCESS.PREFETCHW",
+ "SampleAfterValue": "2000003",
+ "CounterHTOff": "0,1,2,3,4,5,6,7"
+ },
+ {
"EventCode": "0xCB",
"UMask": "0x1",
"BriefDescription": "Number of hardware interrupts received by the processor.",
@@ -50,6 +86,62 @@
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
+ "EventCode": "0xEF",
+ "UMask": "0x1",
+ "Counter": "0,1,2,3",
+ "EventName": "CORE_SNOOP_RESPONSE.RSP_IHITI",
+ "SampleAfterValue": "2000003",
+ "CounterHTOff": "0,1,2,3,4,5,6,7"
+ },
+ {
+ "EventCode": "0xEF",
+ "UMask": "0x2",
+ "Counter": "0,1,2,3",
+ "EventName": "CORE_SNOOP_RESPONSE.RSP_IHITFSE",
+ "SampleAfterValue": "2000003",
+ "CounterHTOff": "0,1,2,3,4,5,6,7"
+ },
+ {
+ "EventCode": "0xEF",
+ "UMask": "0x4",
+ "Counter": "0,1,2,3",
+ "EventName": "CORE_SNOOP_RESPONSE.RSP_SHITFSE",
+ "SampleAfterValue": "2000003",
+ "CounterHTOff": "0,1,2,3,4,5,6,7"
+ },
+ {
+ "EventCode": "0xEF",
+ "UMask": "0x8",
+ "Counter": "0,1,2,3",
+ "EventName": "CORE_SNOOP_RESPONSE.RSP_SFWDM",
+ "SampleAfterValue": "2000003",
+ "CounterHTOff": "0,1,2,3,4,5,6,7"
+ },
+ {
+ "EventCode": "0xEF",
+ "UMask": "0x10",
+ "Counter": "0,1,2,3",
+ "EventName": "CORE_SNOOP_RESPONSE.RSP_IFWDM",
+ "SampleAfterValue": "2000003",
+ "CounterHTOff": "0,1,2,3,4,5,6,7"
+ },
+ {
+ "EventCode": "0xEF",
+ "UMask": "0x20",
+ "Counter": "0,1,2,3",
+ "EventName": "CORE_SNOOP_RESPONSE.RSP_IFWDFE",
+ "SampleAfterValue": "2000003",
+ "CounterHTOff": "0,1,2,3,4,5,6,7"
+ },
+ {
+ "EventCode": "0xEF",
+ "UMask": "0x40",
+ "Counter": "0,1,2,3",
+ "EventName": "CORE_SNOOP_RESPONSE.RSP_SFWDFE",
+ "SampleAfterValue": "2000003",
+ "CounterHTOff": "0,1,2,3,4,5,6,7"
+ },
+ {
"EventCode": "0xFE",
"UMask": "0x2",
"BriefDescription": "Counts number of cache lines that are allocated and written back to L3 with the intention that they are more likely to be reused shortly",
@@ -69,4 +161,4 @@
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
}
-]
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json b/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json
index 0895d1e..f99f7ae 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json
@@ -3,41 +3,41 @@
"EventCode": "0x00",
"UMask": "0x1",
"BriefDescription": "Instructions retired from execution.",
- "Counter": "Fixed counter 1",
+ "Counter": "Fixed counter 0",
"EventName": "INST_RETIRED.ANY",
"PublicDescription": "Counts the number of instructions retired from execution. For instructions that consist of multiple micro-ops, Counts the retirement of the last micro-op of the instruction. Counting continues during hardware interrupts, traps, and inside interrupt handlers. Notes: INST_RETIRED.ANY is counted by a designated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. INST_RETIRED.ANY_P is counted by a programmable counter and it is an architectural performance event. Counting: Faulting executions of GETSEC/VM entry/VM Exit/MWait will not count as retired instructions.",
"SampleAfterValue": "2000003",
- "CounterHTOff": "Fixed counter 1"
+ "CounterHTOff": "Fixed counter 0"
},
{
"EventCode": "0x00",
"UMask": "0x2",
"BriefDescription": "Core cycles when the thread is not in halt state",
- "Counter": "Fixed counter 2",
+ "Counter": "Fixed counter 1",
"EventName": "CPU_CLK_UNHALTED.THREAD",
"PublicDescription": "Counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events.",
"SampleAfterValue": "2000003",
- "CounterHTOff": "Fixed counter 2"
+ "CounterHTOff": "Fixed counter 1"
},
{
"EventCode": "0x00",
"UMask": "0x2",
"BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
- "Counter": "Fixed counter 2",
+ "Counter": "Fixed counter 1",
"EventName": "CPU_CLK_UNHALTED.THREAD_ANY",
"AnyThread": "1",
"SampleAfterValue": "2000003",
- "CounterHTOff": "Fixed counter 2"
+ "CounterHTOff": "Fixed counter 1"
},
{
"EventCode": "0x00",
"UMask": "0x3",
"BriefDescription": "Reference cycles when the core is not in halt state.",
- "Counter": "Fixed counter 3",
+ "Counter": "Fixed counter 2",
"EventName": "CPU_CLK_UNHALTED.REF_TSC",
"PublicDescription": "Counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. This event has a constant ratio with the CPU_CLK_UNHALTED.REF_XCLK event. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. Note: On all current platforms this event stops counting during 'throttling (TM)' states duty off periods the processor is 'halted'. The counter update is done at a lower clock rate then the core clock the overflow status bit for this counter may appear 'sticky'. After the counter has overflowed and software clears t!
he overflow status bit and resets the counter to less than MAX. The reset value to the counter is not clocked immediately so the overflow status bit will flip 'high (1)' and generate another PMI (if enabled) after which the reset value gets clocked into the counter. Therefore, software will get the interrupt, read the overflow status bit '1 for bit 34 while the counter value is less than MAX. Software should ignore this case.",
"SampleAfterValue": "2000003",
- "CounterHTOff": "Fixed counter 3"
+ "CounterHTOff": "Fixed counter 2"
},
{
"EventCode": "0x03",
@@ -126,7 +126,7 @@
"BriefDescription": "Uops inserted at issue-stage in order to preserve upper bits of vector registers.",
"Counter": "0,1,2,3",
"EventName": "UOPS_ISSUED.VECTOR_WIDTH_MISMATCH",
- "PublicDescription": "Counts the number of Blend Uops issued by the Resource Allocation Table (RAT) to the reservation station (RS) in order to preserve upper bits of vector registers. Starting with the Skylake microarchitecture, these Blend uops are needed since every Intel SSE instruction executed in Dirty Upper State needs to preserve bits 128-255 of the destination register. For more information, refer to \u201cMixing Intel AVX and Intel SSE Code\u201d section of the Optimization Guide.",
+ "PublicDescription": "Counts the number of Blend Uops issued by the Resource Allocation Table (RAT) to the reservation station (RS) in order to preserve upper bits of vector registers. Starting with the Skylake microarchitecture, these Blend uops are needed since every Intel SSE instruction executed in Dirty Upper State needs to preserve bits 128-255 of the destination register. For more information, refer to Mixing Intel AVX and Intel SSE Code section of the Optimization Guide.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -762,11 +762,10 @@
"EdgeDetect": "1",
"EventCode": "0xC3",
"UMask": "0x1",
- "BriefDescription": "Number of machine clears (nukes) of any type. ",
+ "BriefDescription": "Number of machine clears (nukes) of any type.",
"Counter": "0,1,2,3",
"EventName": "MACHINE_CLEARS.COUNT",
"CounterMask": "1",
- "PublicDescription": "Number of machine clears (nukes) of any type.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -799,7 +798,7 @@
"Counter": "0,1,2,3",
"EventName": "BR_INST_RETIRED.CONDITIONAL",
"Errata": "SKL091",
- "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts conditional branch instructions retired.",
+ "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts conditional branch instructions retired.",
"SampleAfterValue": "400009",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -811,14 +810,14 @@
"Counter": "0,1,2,3",
"EventName": "BR_INST_RETIRED.NEAR_CALL",
"Errata": "SKL091",
- "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts both direct and indirect near call instructions retired.",
+ "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts both direct and indirect near call instructions retired.",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0xC4",
"UMask": "0x4",
- "BriefDescription": "All (macro) branch instructions retired. ",
+ "BriefDescription": "All (macro) branch instructions retired.",
"PEBS": "2",
"Counter": "0,1,2,3",
"EventName": "BR_INST_RETIRED.ALL_BRANCHES_PEBS",
@@ -835,7 +834,7 @@
"Counter": "0,1,2,3",
"EventName": "BR_INST_RETIRED.NEAR_RETURN",
"Errata": "SKL091",
- "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts return instructions retired.",
+ "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts return instructions retired.",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -858,19 +857,19 @@
"Counter": "0,1,2,3",
"EventName": "BR_INST_RETIRED.NEAR_TAKEN",
"Errata": "SKL091",
- "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts taken branch instructions retired.",
+ "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts taken branch instructions retired.",
"SampleAfterValue": "400009",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0xC4",
"UMask": "0x40",
- "BriefDescription": "Far branch instructions retired.",
+ "BriefDescription": "Counts the number of far branch instructions retired.",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "BR_INST_RETIRED.FAR_BRANCH",
"Errata": "SKL091",
- "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts far branch instructions retired.",
+ "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts far branch instructions retired.",
"SampleAfterValue": "100007",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -891,7 +890,7 @@
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "BR_MISP_RETIRED.CONDITIONAL",
- "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts mispredicted conditional branch instructions retired.",
+ "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts mispredicted conditional branch instructions retired.",
"SampleAfterValue": "400009",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -902,14 +901,14 @@
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "BR_MISP_RETIRED.NEAR_CALL",
- "PublicDescription": "Counts both taken and not taken retired mispredicted direct and indirect near calls, including both register and memory indirect.",
+ "PublicDescription": "This event counts both taken and not taken retired mispredicted direct and indirect near calls, including both register and memory indirect.",
"SampleAfterValue": "400009",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0xC5",
"UMask": "0x4",
- "BriefDescription": "Mispredicted macro branch instructions retired. ",
+ "BriefDescription": "Mispredicted macro branch instructions retired.",
"PEBS": "2",
"Counter": "0,1,2,3",
"EventName": "BR_MISP_RETIRED.ALL_BRANCHES_PEBS",
@@ -920,10 +919,11 @@
{
"EventCode": "0xC5",
"UMask": "0x20",
- "BriefDescription": "Number of near branch instructions retired that were mispredicted and taken.",
+ "BriefDescription": "Number of near branch instructions retired that were mispredicted and taken. ",
"PEBS": "1",
"Counter": "0,1,2,3",
"EventName": "BR_MISP_RETIRED.NEAR_TAKEN",
+ "PublicDescription": "Number of near branch instructions retired that were mispredicted and taken.",
"SampleAfterValue": "400009",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/virtual-memory.json b/tools/perf/pmu-events/arch/x86/skylakex/virtual-memory.json
index 70750da..7f466c9 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/virtual-memory.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/virtual-memory.json
@@ -12,30 +12,30 @@
{
"EventCode": "0x08",
"UMask": "0x2",
- "BriefDescription": "Demand load Miss in all translation lookaside buffer (TLB) levels causes a page walk that completes (4K).",
+ "BriefDescription": "Page walk completed due to a demand data load to a 4K page",
"Counter": "0,1,2,3",
"EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_4K",
- "PublicDescription": "Counts demand data loads that caused a completed page walk (4K page size). This implies it missed in all TLB levels. The page walk can end with or without a fault.",
+ "PublicDescription": "Counts page walks completed due to demand data loads whose address translations missed in the TLB and were mapped to 4K pages. The page walks can end with or without a page fault.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x08",
"UMask": "0x4",
- "BriefDescription": "Demand load Miss in all translation lookaside buffer (TLB) levels causes a page walk that completes (2M/4M).",
+ "BriefDescription": "Page walk completed due to a demand data load to a 2M/4M page",
"Counter": "0,1,2,3",
"EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_2M_4M",
- "PublicDescription": "Counts demand data loads that caused a completed page walk (2M and 4M page sizes). This implies it missed in all TLB levels. The page walk can end with or without a fault.",
+ "PublicDescription": "Counts page walks completed due to demand data loads whose address translations missed in the TLB and were mapped to 2M/4M pages. The page walks can end with or without a page fault.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x08",
"UMask": "0x8",
- "BriefDescription": "Load miss in all TLB levels causes a page walk that completes. (1G)",
+ "BriefDescription": "Page walk completed due to a demand data load to a 1G page",
"Counter": "0,1,2,3",
"EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_1G",
- "PublicDescription": "Counts load misses in all DTLB levels that cause a completed page walk (1G page size). The page walk can end with or without a fault.",
+ "PublicDescription": "Counts page walks completed due to demand data loads whose address translations missed in the TLB and were mapped to 4K pages. The page walks can end with or without a page fault.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -52,17 +52,17 @@
{
"EventCode": "0x08",
"UMask": "0x10",
- "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a load. EPT page walk duration are excluded in Skylake. ",
+ "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a load. EPT page walk duration are excluded in Skylake.",
"Counter": "0,1,2,3",
"EventName": "DTLB_LOAD_MISSES.WALK_PENDING",
- "PublicDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a load. EPT page walk duration are excluded in Skylake microarchitecture. ",
+ "PublicDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a load. EPT page walk duration are excluded in Skylake microarchitecture.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x08",
"UMask": "0x10",
- "BriefDescription": "Cycles when at least one PMH is busy with a page walk for a load. EPT page walk duration are excluded in Skylake. ",
+ "BriefDescription": "Cycles when at least one PMH is busy with a page walk for a load. EPT page walk duration are excluded in Skylake.",
"Counter": "0,1,2,3",
"EventName": "DTLB_LOAD_MISSES.WALK_ACTIVE",
"CounterMask": "1",
@@ -93,30 +93,30 @@
{
"EventCode": "0x49",
"UMask": "0x2",
- "BriefDescription": "Store miss in all TLB levels causes a page walk that completes. (4K)",
+ "BriefDescription": "Page walk completed due to a demand data store to a 4K page",
"Counter": "0,1,2,3",
"EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_4K",
- "PublicDescription": "Counts demand data stores that caused a completed page walk (4K page size). This implies it missed in all TLB levels. The page walk can end with or without a fault.",
+ "PublicDescription": "Counts page walks completed due to demand data stores whose address translations missed in the TLB and were mapped to 4K pages. The page walks can end with or without a page fault.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x49",
"UMask": "0x4",
- "BriefDescription": "Store misses in all DTLB levels that cause completed page walks (2M/4M)",
+ "BriefDescription": "Page walk completed due to a demand data store to a 2M/4M page",
"Counter": "0,1,2,3",
"EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_2M_4M",
- "PublicDescription": "Counts demand data stores that caused a completed page walk (2M and 4M page sizes). This implies it missed in all TLB levels. The page walk can end with or without a fault.",
+ "PublicDescription": "Counts page walks completed due to demand data stores whose address translations missed in the TLB and were mapped to 2M/4M pages. The page walks can end with or without a page fault.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x49",
"UMask": "0x8",
- "BriefDescription": "Store misses in all DTLB levels that cause completed page walks (1G)",
+ "BriefDescription": "Page walk completed due to a demand data store to a 1G page",
"Counter": "0,1,2,3",
"EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_1G",
- "PublicDescription": "Counts store misses in all DTLB levels that cause a completed page walk (1G page size). The page walk can end with or without a fault.",
+ "PublicDescription": "Counts page walks completed due to demand data stores whose address translations missed in the TLB and were mapped to 1G pages. The page walks can end with or without a page fault.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -133,17 +133,17 @@
{
"EventCode": "0x49",
"UMask": "0x10",
- "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a store. EPT page walk duration are excluded in Skylake. ",
+ "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a store. EPT page walk duration are excluded in Skylake.",
"Counter": "0,1,2,3",
"EventName": "DTLB_STORE_MISSES.WALK_PENDING",
- "PublicDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a store. EPT page walk duration are excluded in Skylake microarchitecture. ",
+ "PublicDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a store. EPT page walk duration are excluded in Skylake microarchitecture.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x49",
"UMask": "0x10",
- "BriefDescription": "Cycles when at least one PMH is busy with a page walk for a store. EPT page walk duration are excluded in Skylake. ",
+ "BriefDescription": "Cycles when at least one PMH is busy with a page walk for a store. EPT page walk duration are excluded in Skylake.",
"Counter": "0,1,2,3",
"EventName": "DTLB_STORE_MISSES.WALK_ACTIVE",
"CounterMask": "1",
@@ -197,7 +197,7 @@
"BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (2M/4M)",
"Counter": "0,1,2,3",
"EventName": "ITLB_MISSES.WALK_COMPLETED_2M_4M",
- "PublicDescription": "Counts completed page walks of any page size (4K/2M/4M/1G) caused by a code fetch. This implies it missed in the ITLB and further levels of TLB. The page walk can end with or without a fault.",
+ "PublicDescription": "Counts code misses in all ITLB levels that caused a completed page walk (2M and 4M page sizes). The page walk can end with or without a fault.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
@@ -224,10 +224,10 @@
{
"EventCode": "0x85",
"UMask": "0x10",
- "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for an instruction fetch request. EPT page walk duration are excluded in Skylake. ",
+ "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for an instruction fetch request. EPT page walk duration are excluded in Skylake.",
"Counter": "0,1,2,3",
"EventName": "ITLB_MISSES.WALK_PENDING",
- "PublicDescription": "Counts 1 per cycle for each PMH (Page Miss Handler) that is busy with a page walk for an instruction fetch request. EPT page walk duration are excluded in Skylake michroarchitecture. ",
+ "PublicDescription": "Counts 1 per cycle for each PMH (Page Miss Handler) that is busy with a page walk for an instruction fetch request. EPT page walk duration are excluded in Skylake michroarchitecture.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},

Next message: tip-bot for Andi Kleen: "[tip:perf/core] perf vendor events intel: Update BroadwellDE events to V7"
Previous message: tip-bot for Andi Kleen: "[tip:perf/core] perf vendor events intel: Update Skylake events to V36"
In reply to: tip-bot for Andi Kleen: "[tip:perf/core] perf vendor events intel: Update SkylakeX events to V1.06"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]