[patch v18 3/4] Documentation: jtag: Add bindings for Aspeed SoC 24xx and 25xx families JTAG master driver

[Oleksandr Shamray]

It has been tested on Mellanox system with BMC equipped with
Aspeed 2520 SoC for programming CPLD devices.

Signed-off-by: Oleksandr Shamray <oleksandrs@xxxxxxxxxxxx>
Signed-off-by: Jiri Pirko <jiri@xxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
v17->v18
v16->v17
v15->v16
Comments pointed by Joel Stanley <joel.stan@xxxxxxxxx>
- change clocks = <&clk_apb> to proper clocks = <&syscon ASPEED_CLK_APB>
- add reset descriptions in bndings file

v14->v15
v13->v14
v12->v13
v11->v12
v10->v11
v9->v10
v8->v9
v7->v8
Comments pointed by pointed by Joel Stanley <joel.stan@xxxxxxxxx>
- Change compatible string to ast2400 and ast2000

V6->v7
Comments pointed by Tobias Klauser <tklauser@xxxxxxxxxx>
 - Fix spell "Doccumentation" -> "Documentation"

v5->v6
Comments pointed by Tobias Klauser <tklauser@xxxxxxxxxx>
- Small nit: s/documentation/Documentation/

v4->v5

V3->v4
Comments pointed by Rob Herring <robh@xxxxxxxxxx>
- delete unnecessary "status" and "reg-shift" descriptions in
  bndings file

v2->v3
Comments pointed by Rob Herring <robh@xxxxxxxxxx>
- split Aspeed jtag driver and binding to sepatrate patches
- delete unnecessary "status" and "reg-shift" descriptions in
  bndings file
---
 .../devicetree/bindings/jtag/aspeed-jtag.txt       |   22 ++++++++++++++++++++
 1 files changed, 22 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/jtag/aspeed-jtag.txt

diff --git a/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt b/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
new file mode 100644
index 0000000..7c36eb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
@@ -0,0 +1,22 @@
+Aspeed JTAG driver for ast2400 and ast2500 SoC
+
+Required properties:
+- compatible:		Should be one of
+      - "aspeed,ast2400-jtag"
+      - "aspeed,ast2500-jtag"
+- reg			contains the offset and length of the JTAG memory
+			region
+- clocks		root clock of bus, should reference the APB
+			clock in the second cell
+- resets		phandle to reset controller with the reset number in
+			the second cell
+- interrupts		should contain JTAG controller interrupt
+
+Example:
+jtag: jtag@1e6e4000 {
+	compatible = "aspeed,ast2500-jtag";
+	reg = <0x1e6e4000 0x1c>;
+	clocks = <&syscon ASPEED_CLK_APB>;
+	resets = <&syscon ASPEED_RESET_JTAG_MASTER>;
+	interrupts = <43>;
+};
-- 
1.7.1