Re: [PATCH v2 10/16] iio: adc: sun4i-gpadc-iio: add support for A83T thermal sensor

[Maxime Ripard]

1;5002;0c
On Mon, Jan 29, 2018 at 12:53:48PM +0100, Philipp Rossak wrote:
> 
> 
> On 29.01.2018 10:48, Maxime Ripard wrote:
> > On Mon, Jan 29, 2018 at 12:29:13AM +0100, Philipp Rossak wrote:
> > > This patch adds support for the A83T ths sensor.
> > > 
> > > The A83T supports interrupts. The interrupt is configured to update the
> > > the sensor values every second.
> > > 
> > > Signed-off-by: Philipp Rossak <embed3d@xxxxxxxxx>
> > > ---
> > >   drivers/iio/adc/sun4i-gpadc-iio.c | 38 ++++++++++++++++++++++++++++++++++++++
> > >   include/linux/mfd/sun4i-gpadc.h   | 18 ++++++++++++++++++
> > >   2 files changed, 56 insertions(+)
> > > 
> > > diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
> > > index 8196203d65fe..9f7895ba1966 100644
> > > --- a/drivers/iio/adc/sun4i-gpadc-iio.c
> > > +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
> > > @@ -170,6 +170,40 @@ static const struct gpadc_data sun8i_h3_ths_data = {
> > >   		SUN8I_H3_THS_TEMP_PERIOD(0x7),
> > >   };
> > > +static const struct gpadc_data sun8i_a83t_ths_data = {
> > > +	.temp_offset = -2724,
> > > +	.temp_scale = -70,
> > > +	.temp_data = {SUN8I_H3_THS_TDATA0,
> > > +		SUN8I_A83T_THS_TDATA1,
> > > +		SUN8I_A83T_THS_TDATA2,
> > > +		0},
> > > +	.sample_start = sunxi_ths_sample_start,
> > > +	.sample_end = sunxi_ths_sample_end,
> > > +	.sensor_count = 3,
> > > +	.supports_nvmem = false,
> > > +	.support_irq = true,
> > > +	.ctrl0_map = SUN4I_GPADC_CTRL0_T_ACQ(0x1f3),
> > > +	.ctrl2_map = SUN8I_H3_THS_ACQ1(0x1f3),
> > 
> > Where are these values coming from?
> > 
> 
> These values are calculated with the formulas from the datasheet and also
> tested on hardware. These settings seem ok.

You should at least put a comment explaining how you got to these values.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature