[PATCH v3 1/2] ARM: dts: imx25-pinfunc: Use consistent naming for eSDHC
From: BenoÃt ThÃbaudeau
Date: Wed Jan 31 2018 - 16:36:07 EST
This file had several naming inconsistencies for eSDHC:
- the instances were named sometimes SDn, sometimes SDHCn, whereas they
are named ESDHCn in the reference manual, e.g.:
MX25_PAD_SD1_CMD__SD1_CMD
MX25_PAD_D15__SDHC1_DAT7
- the data ports were named sometimes DATAn, sometimes DATn like in the
reference manual, e.g.:
MX25_PAD_SD1_DATA0__SD1_DATA0
MX25_PAD_D15__SDHC1_DAT7
- in one case, the clock port was named DAT_CLK instead of CLK:
MX25_PAD_CSI_D7__SDHC2_DAT_CLK
This change:
- introduces new definitions using the naming from the reference
manual,
- keeps definitions using the legacy naming in order not to break
compatibility for out-of-tree users (they can be removed later),
- updates the in-tree files that were using the legacy naming.
Cc: Uwe Kleine-KÃnig <u.kleine-koenig@xxxxxxxxxxxxxx>
Signed-off-by: BenoÃt ThÃbaudeau <benoit.thebaudeau.dev@xxxxxxxxx>
Acked-by: Uwe Kleine-KÃnig <u.kleine-koenig@xxxxxxxxxxxxxx>
---
Changes v2 -> v3:
- None.
Changes v1 -> v2:
- New patch (suggested by Uwe).
---
.../boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts | 12 ++--
arch/arm/boot/dts/imx25-pdk.dts | 12 ++--
arch/arm/boot/dts/imx25-pinfunc.h | 72 ++++++++++++++--------
3 files changed, 60 insertions(+), 36 deletions(-)
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
index 0f053721d80f..6273a1f243ed 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -88,12 +88,12 @@
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
- MX25_PAD_SD1_CMD__SD1_CMD 0x400000c0
- MX25_PAD_SD1_CLK__SD1_CLK 0x400000c0
- MX25_PAD_SD1_DATA0__SD1_DATA0 0x400000c0
- MX25_PAD_SD1_DATA1__SD1_DATA1 0x400000c0
- MX25_PAD_SD1_DATA2__SD1_DATA2 0x400000c0
- MX25_PAD_SD1_DATA3__SD1_DATA3 0x400000c0
+ MX25_PAD_SD1_CMD__ESDHC1_CMD 0x400000c0
+ MX25_PAD_SD1_CLK__ESDHC1_CLK 0x400000c0
+ MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x400000c0
+ MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x400000c0
+ MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x400000c0
+ MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x400000c0
>;
};
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index 2d15ce72d006..498496deaa27 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -165,12 +165,12 @@
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
- MX25_PAD_SD1_CMD__SD1_CMD 0x80000000
- MX25_PAD_SD1_CLK__SD1_CLK 0x80000000
- MX25_PAD_SD1_DATA0__SD1_DATA0 0x80000000
- MX25_PAD_SD1_DATA1__SD1_DATA1 0x80000000
- MX25_PAD_SD1_DATA2__SD1_DATA2 0x80000000
- MX25_PAD_SD1_DATA3__SD1_DATA3 0x80000000
+ MX25_PAD_SD1_CMD__ESDHC1_CMD 0x80000000
+ MX25_PAD_SD1_CLK__ESDHC1_CLK 0x80000000
+ MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000
+ MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000
+ MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000
+ MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000
MX25_PAD_A14__GPIO_2_0 0x80000000
MX25_PAD_A15__GPIO_2_1 0x80000000
>;
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index 6c63dca1b9b8..2915c65a13c9 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -151,21 +151,21 @@
#define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000
#define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000
#define MX25_PAD_D15__GPIO_4_5 0x088 0x280 0x000 0x05 0x000
-#define MX25_PAD_D15__SDHC1_DAT7 0x088 0x280 0x4d8 0x06 0x000
+#define MX25_PAD_D15__ESDHC1_DAT7 0x088 0x280 0x4d8 0x06 0x000
#define MX25_PAD_D14__D14 0x08c 0x284 0x000 0x00 0x000
#define MX25_PAD_D14__LD17 0x08c 0x284 0x000 0x01 0x000
#define MX25_PAD_D14__GPIO_4_6 0x08c 0x284 0x000 0x05 0x000
-#define MX25_PAD_D14__SDHC1_DAT6 0x08c 0x284 0x4d4 0x06 0x000
+#define MX25_PAD_D14__ESDHC1_DAT6 0x08c 0x284 0x4d4 0x06 0x000
#define MX25_PAD_D13__D13 0x090 0x288 0x000 0x00 0x000
#define MX25_PAD_D13__LD18 0x090 0x288 0x000 0x01 0x000
#define MX25_PAD_D13__GPIO_4_7 0x090 0x288 0x000 0x05 0x000
-#define MX25_PAD_D13__SDHC1_DAT5 0x090 0x288 0x4d0 0x06 0x000
+#define MX25_PAD_D13__ESDHC1_DAT5 0x090 0x288 0x4d0 0x06 0x000
#define MX25_PAD_D12__D12 0x094 0x28c 0x000 0x00 0x000
#define MX25_PAD_D12__GPIO_4_8 0x094 0x28c 0x000 0x05 0x000
-#define MX25_PAD_D12__SDHC1_DAT4 0x094 0x28c 0x4cc 0x06 0x000
+#define MX25_PAD_D12__ESDHC1_DAT4 0x094 0x28c 0x4cc 0x06 0x000
#define MX25_PAD_D11__D11 0x098 0x290 0x000 0x00 0x000
#define MX25_PAD_D11__GPIO_4_9 0x098 0x290 0x000 0x05 0x000
@@ -236,12 +236,12 @@
#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x00 0x000
#define MX25_PAD_LD8__UART4_RXD 0x0e8 0x2e0 0x570 0x02 0x000
#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x05 0x000
-#define MX25_PAD_LD8__SDHC2_CMD 0x0e8 0x2e0 0x4e0 0x06 0x000
+#define MX25_PAD_LD8__ESDHC2_CMD 0x0e8 0x2e0 0x4e0 0x06 0x000
#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x00 0x000
#define MX25_PAD_LD9__UART4_TXD 0x0ec 0x2e4 0x000 0x02 0x000
#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x05 0x001
-#define MX25_PAD_LD9__SDHC2_CLK 0x0ec 0x2e4 0x4dc 0x06 0x000
+#define MX25_PAD_LD9__ESDHC2_CLK 0x0ec 0x2e4 0x4dc 0x06 0x000
#define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x00 0x000
#define MX25_PAD_LD10__UART4_RTS 0x0f0 0x2e8 0x56c 0x02 0x000
@@ -250,7 +250,7 @@
#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x00 0x000
#define MX25_PAD_LD11__UART4_CTS 0x0f4 0x2ec 0x000 0x02 0x000
#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x05 0x001
-#define MX25_PAD_LD11__SDHC2_DAT1 0x0f4 0x2ec 0x4e8 0x06 0x000
+#define MX25_PAD_LD11__ESDHC2_DAT1 0x0f4 0x2ec 0x4e8 0x06 0x000
#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x00 0x000
#define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000
@@ -316,12 +316,12 @@
#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x07 0x000
#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x00 0x000
-#define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x02 0x001
+#define MX25_PAD_CSI_D6__ESDHC2_CMD 0x130 0x328 0x4e0 0x02 0x001
#define MX25_PAD_CSI_D6__SIM1_PD0 0x130 0x328 0x000 0x04 0x000
#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x05 0x000
#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x00 0x000
-#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK 0x134 0x32C 0x4dc 0x02 0x001
+#define MX25_PAD_CSI_D7__ESDHC2_CLK 0x134 0x32C 0x4dc 0x02 0x001
#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x05 0x000
#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x00 0x000
@@ -336,22 +336,22 @@
#define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x00 0x000
#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x01 0x000
-#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x02 0x001
+#define MX25_PAD_CSI_MCLK__ESDHC2_DAT0 0x140 0x338 0x4e4 0x02 0x001
#define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x05 0x000
#define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x00 0x000
#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x01 0x000
-#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x02 0x001
+#define MX25_PAD_CSI_VSYNC__ESDHC2_DAT1 0x144 0x33c 0x4e8 0x02 0x001
#define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x05 0x000
#define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x00 0x000
#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x01 0x000
-#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x02 0x001
+#define MX25_PAD_CSI_HSYNC__ESDHC2_DAT2 0x148 0x340 0x4ec 0x02 0x001
#define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x05 0x000
#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x00 0x000
#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x01 0x000
-#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x02 0x001
+#define MX25_PAD_CSI_PIXCLK__ESDHC2_DAT3 0x14c 0x344 0x4f0 0x02 0x001
#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x05 0x000
#define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x00 0x000
@@ -419,37 +419,37 @@
#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x05 0x000
/*
- * Removing the SION bit from MX25_PAD_SD1_CMD__SD1_CMD breaks detecting an SD
- * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM
- * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon
- * bug that configuring the SD1_CMD function doesn't enable the input path for
- * this pin.
+ * Removing the SION bit from MX25_PAD_SD1_CMD__ESDHC1_CMD breaks detecting an
+ * SD card. According to the i.MX25 reference manual (e.g. Figure 23-2 in
+ * IMX25RM Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a
+ * silicon bug that configuring the ESDHC1_CMD function doesn't enable the input
+ * path for this pin.
* This might have side effects for other hardware units that are connected to
* that pin and use the respective function as input.
*/
-#define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000
+#define MX25_PAD_SD1_CMD__ESDHC1_CMD 0x190 0x388 0x000 0x10 0x000
#define MX25_PAD_SD1_CMD__CSPI2_MOSI 0x190 0x388 0x4a0 0x01 0x001
#define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x02 0x002
#define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x05 0x000
-#define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x00 0x000
+#define MX25_PAD_SD1_CLK__ESDHC1_CLK 0x194 0x38c 0x000 0x00 0x000
#define MX25_PAD_SD1_CLK__CSPI2_MISO 0x194 0x38c 0x49c 0x01 0x001
#define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x02 0x002
#define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x05 0x000
-#define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x198 0x390 0x000 0x00 0x000
#define MX25_PAD_SD1_DATA0__CSPI2_SCLK 0x198 0x390 0x494 0x01 0x001
#define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x05 0x000
-#define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x19c 0x394 0x000 0x00 0x000
#define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x03 0x000
#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x05 0x000
-#define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x1a0 0x398 0x000 0x00 0x000
#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x02 0x002
#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x05 0x000
-#define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x1a4 0x39c 0x000 0x00 0x000
#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x02 0x002
#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x05 0x000
@@ -601,4 +601,28 @@
#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 0x228 0x000 0x000 0x00 0x000
#define MX25_PAD_BOOT_MODE1__GPIO_4_31 0x228 0x000 0x000 0x05 0x000
+/*
+ * Compatibility defines for out-of-tree users. You should update if you make
+ * use of one of them.
+ */
+#define MX25_PAD_D15__SDHC1_DAT7 MX25_PAD_D15__ESDHC1_DAT7
+#define MX25_PAD_D14__SDHC1_DAT6 MX25_PAD_D14__ESDHC1_DAT6
+#define MX25_PAD_D13__SDHC1_DAT5 MX25_PAD_D13__ESDHC1_DAT5
+#define MX25_PAD_D12__SDHC1_DAT4 MX25_PAD_D12__ESDHC1_DAT4
+#define MX25_PAD_LD8__SDHC2_CMD MX25_PAD_LD8__ESDHC2_CMD
+#define MX25_PAD_LD9__SDHC2_CLK MX25_PAD_LD9__ESDHC2_CLK
+#define MX25_PAD_LD11__SDHC2_DAT1 MX25_PAD_LD11__ESDHC2_DAT1
+#define MX25_PAD_CSI_D6__SDHC2_CMD MX25_PAD_CSI_D6__ESDHC2_CMD
+#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK MX25_PAD_CSI_D7__ESDHC2_CLK
+#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 MX25_PAD_CSI_MCLK__ESDHC2_DAT0
+#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 MX25_PAD_CSI_VSYNC__ESDHC2_DAT1
+#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 MX25_PAD_CSI_HSYNC__ESDHC2_DAT2
+#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 MX25_PAD_CSI_PIXCLK__ESDHC2_DAT3
+#define MX25_PAD_SD1_CMD__SD1_CMD MX25_PAD_SD1_CMD__ESDHC1_CMD
+#define MX25_PAD_SD1_CLK__SD1_CLK MX25_PAD_SD1_CLK__ESDHC1_CLK
+#define MX25_PAD_SD1_DATA0__SD1_DATA0 MX25_PAD_SD1_DATA0__ESDHC1_DAT0
+#define MX25_PAD_SD1_DATA1__SD1_DATA1 MX25_PAD_SD1_DATA1__ESDHC1_DAT1
+#define MX25_PAD_SD1_DATA2__SD1_DATA2 MX25_PAD_SD1_DATA2__ESDHC1_DAT2
+#define MX25_PAD_SD1_DATA3__SD1_DATA3 MX25_PAD_SD1_DATA3__ESDHC1_DAT3
+
#endif /* __DTS_IMX25_PINFUNC_H */
--
2.14.1