[PATCH] Input: matrix_keypad - fix keypad does not response
From: Zhang Bo
Date: Sat Feb 03 2018 - 07:05:21 EST
From: zhangbo <zbsdta@xxxxxxx>
If matrix_keypad_stop() is calling and the keypad interrupt is triggered,
disable_row_irqs() is called by both matrix_keypad_interrupt() and
matrix_keypad_stop() at the same time. then disable_row_irqs() is called
twice, and the device enter suspend state before keypad->work is executed.
At this condition the device will start keypad and enable irq once after
resume. and then irqs are disabled yet because irqs are disabled twice and
only enable once.
Signed-off-by: zhangbo <zbsdta@xxxxxxx>
---
drivers/input/keyboard/matrix_keypad.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 1f316d66e6f7..13fe51824637 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -169,7 +169,8 @@ static void matrix_keypad_scan(struct work_struct *work)
/* Enable IRQs again */
spin_lock_irq(&keypad->lock);
keypad->scan_pending = false;
- enable_row_irqs(keypad);
+ if (keypad->stopped == false)
+ enable_row_irqs(keypad);
spin_unlock_irq(&keypad->lock);
}
@@ -202,14 +203,16 @@ static int matrix_keypad_start(struct input_dev *dev)
{
struct matrix_keypad *keypad = input_get_drvdata(dev);
+ spin_lock_irq(&keypad->lock);
keypad->stopped = false;
- mb();
/*
* Schedule an immediate key scan to capture current key state;
* columns will be activated and IRQs be enabled after the scan.
*/
- schedule_delayed_work(&keypad->work, 0);
+ if (keypad->scan_pending == false)
+ schedule_delayed_work(&keypad->work, 0);
+ spin_unlock_irq(&keypad->lock);
return 0;
}
@@ -218,14 +221,17 @@ static void matrix_keypad_stop(struct input_dev *dev)
{
struct matrix_keypad *keypad = input_get_drvdata(dev);
+ spin_lock_irq(&keypad->lock);
keypad->stopped = true;
- mb();
- flush_work(&keypad->work.work);
/*
* matrix_keypad_scan() will leave IRQs enabled;
* we should disable them now.
*/
- disable_row_irqs(keypad);
+ if (keypad->scan_pending == false)
+ disable_row_irqs(keypad);
+ spin_unlock_irq(&keypad->lock);
+
+ flush_work(&keypad->work.work);
}
#ifdef CONFIG_PM_SLEEP
--
2.14.3