[PATCH AUTOSEL for 4.14 004/110] scsi: aacraid: Fix I/O drop during reset

[Sasha Levin]

From: Prasad B Munirathnam <prasad.munirathnam@xxxxxxxxxxxxx>

[ Upstream commit 5771cfffdffe709ae9b403b6f80438ca40bf850e ]

"FIB_CONTEXT_FLAG_TIMEDOUT" flag is set in aac_eh_abort to indicate
command timeout. Using the same flag in reset handler causes the command
to time out and the I/Os were dropped.

Define a new flag "FIB_CONTEXT_FLAG_EH_RESET" to make sure I/O is
properly handled in eh_reset handler.

[mkp: tweaked commit message]

Signed-off-by: Prasad B Munirathnam <prasad.munirathnam@xxxxxxxxxxxxx>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@xxxxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
 drivers/scsi/aacraid/aacraid.h | 1 +
 drivers/scsi/aacraid/linit.c   | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 403a639574e5..b0b290f7b8dc 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1724,6 +1724,7 @@ struct aac_dev
 #define FIB_CONTEXT_FLAG_NATIVE_HBA		(0x00000010)
 #define FIB_CONTEXT_FLAG_NATIVE_HBA_TMF	(0x00000020)
 #define FIB_CONTEXT_FLAG_SCSI_CMD	(0x00000040)
+#define FIB_CONTEXT_FLAG_EH_RESET	(0x00000080)
 
 /*
  *	Define the command values
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index c9252b138c1f..509fe23fafe1 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1037,7 +1037,7 @@ static int aac_eh_bus_reset(struct scsi_cmnd* cmd)
 			info = &aac->hba_map[bus][cid];
 			if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS ||
 			    info->devtype != AAC_DEVTYPE_NATIVE_RAW) {
-				fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT;
+				fib->flags |= FIB_CONTEXT_FLAG_EH_RESET;
 				cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER;
 			}
 		}
-- 
2.11.0