[PATCH AUTOSEL for 4.14 062/110] tg3: Enable PHY reset in MTU change path for 5720

[Sasha Levin]

From: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxxx>

[ Upstream commit e60ee41aaf898584205a6af5c996860d0fe6a836 ]

A customer noticed RX path hang when MTU is changed on the fly while
running heavy traffic with NCSI enabled for 5717 and 5719. Since 5720
belongs to same ASIC family, we observed same issue and same fix
could solve this problem for 5720.

Signed-off-by: Siva Reddy Kallam <siva.kallam@xxxxxxxxxxxx>
Signed-off-by: Michael Chan <michael.chan@xxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
 drivers/net/ethernet/broadcom/tg3.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 69e1bd5497aa..48738eb27806 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -14239,7 +14239,8 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu)
 	 */
 	if (tg3_asic_rev(tp) == ASIC_REV_57766 ||
 	    tg3_asic_rev(tp) == ASIC_REV_5717 ||
-	    tg3_asic_rev(tp) == ASIC_REV_5719)
+	    tg3_asic_rev(tp) == ASIC_REV_5719 ||
+	    tg3_asic_rev(tp) == ASIC_REV_5720)
 		reset_phy = true;
 
 	err = tg3_restart_hw(tp, reset_phy);
-- 
2.11.0