[PATCH AUTOSEL for 4.4 10/32] ARM: dts: ls1021a: fix incorrect clock references

[Sasha Levin]

From: Arnd Bergmann <arnd@xxxxxxxx>

[ Upstream commit 506e8a912661c97b41adc8a286b875d01323ec45 ]

dtc warns about two 'clocks' properties that have an extraneous '1'
at the end:

arch/arm/boot/dts/ls1021a-qds.dtb: Warning (clocks_property): arch/arm/boot/dts/ls1021a-twr.dtb: Warning (clocks_property): Property 'clocks', cell 1 is not a phandle reference in /soc/i2c@2180000/mux@77/i2c@4/sgtl5000@2a
arch/arm/boot/dts/ls1021a-qds.dtb: Warning (clocks_property): Missing property '#clock-cells' in node /soc/interrupt-controller@1400000 or bad phandle (referred from /soc/i2c@2180000/mux@77/i2c@4/sgtl5000@2a:clocks[1])
Property 'clocks', cell 1 is not a phandle reference in /soc/i2c@2190000/sgtl5000@a
arch/arm/boot/dts/ls1021a-twr.dtb: Warning (clocks_property): Missing property '#clock-cells' in node /soc/interrupt-controller@1400000 or bad phandle (referred from /soc/i2c@2190000/sgtl5000@a:clocks[1])

The clocks that get referenced here are fixed-rate, so they do not
take any argument, and dtc interprets the next cell as a phandle, which
is invalid.

Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
 arch/arm/boot/dts/ls1021a-qds.dts | 2 +-
 arch/arm/boot/dts/ls1021a-twr.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 0521e6864cb7..76fce89d4f69 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -215,7 +215,7 @@
 				reg = <0x2a>;
 				VDDA-supply = <&reg_3p3v>;
 				VDDIO-supply = <&reg_3p3v>;
-				clocks = <&sys_mclk 1>;
+				clocks = <&sys_mclk>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index fbb89d13401e..674df87629bd 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -167,7 +167,7 @@
 		reg = <0x0a>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&sys_mclk 1>;
+		clocks = <&sys_mclk>;
 	};
 };
 
-- 
2.11.0