[PATCH 1/6] genalloc: track beginning of allocations

[Igor Stoppa]

The genalloc library is only capable of tracking if a certain unit of
allocation is in use or not.

It is not capable of discerning where the memory associated to an
allocation request begins and where it ends.

The reason is that units of allocations are tracked by using a bitmap,
where each bit represents that the unit is either allocated (1) or
available (0).

The user of the API must keep track of how much space was requested, if
it ever needs to be freed.

This can cause errors being undetected.
Ex:
* Only a subset of the memory provided to an allocation request is freed
* The memory from a subsequent allocation is freed
* The memory being freed doesn't start at the beginning of an
  allocation.

The bitmap is used because it allows to perform lockless read/write
access, where this is supported by hw through cmpxchg.
Similarly, it is possible to scan the bitmap for a sufficiently long
sequence of zeros, to identify zones available for allocation.

--

This patch doubles the space reserved in the bitmap for each allocation.
By using 2 bits per allocation, it is possible to encode also the
information of where the allocation starts:
(msb to the left, lsb to the right, in the following "dictionary")

11: first allocation unit in the allocation
10: any subsequent allocation unit (if any) in the allocation
00: available allocation unit
01: invalid

Ex, with the same notation as above - MSb.......LSb:

 ...000010111100000010101011   <-- Read in this direction.
    \__|\__|\|\____|\______|
       |   | |     |       \___ 4 used allocation units
       |   | |     \___________ 3 empty allocation units
       |   | \_________________ 1 used allocation unit
       |   \___________________ 2 used allocation units
       \_______________________ 2 empty allocation units

Because of the encoding, the previous lockless operations are still
possible. The only caveat is to change the parameter of the zero-finding
function which establishes the alignment at which to perform the test
for first zero.
The original value of the parameter is 0, meaning that an allocation can
start at any point in the bitmap, while the new value is 1, meaning that
allocations can start only at even places (bit 0, bit 2, etc.)
The number of zeroes to look for, must therefore be doubled.

When it's time to free the memory associated to an allocation request,
it's a matter of checking if the corresponding allocation unit is really
the beginning of an allocation (both bits are set to 1).
Looking for the ending can also be performed locklessly.
It's sufficient to identify the first mapped allocation unit
that is represented either as free (00) or busy (11).
Even if the allocation status should change in the meanwhile, it doesn't
matter, since it can only transition between free (00) and
first-allocated (11).

The parameter indicating to the *_free() function the size of the space
that should be freed is not currently removed, to facilitate the
transition, but it is verified, whenever it is not zero.
If it is set to zero, then the free function will autonomously decide the
size to be free, by scanning the bitmap.

About the implementation: the patch introduces the concept of "bitmap
entry", which has a 1:1 mapping with allocation units, while the code
being patched has a 1:1 mapping between allocation units and bits.

This means that, now, the bitmap can be extended (by following powers of
2), to track also other properties of the allocations, if ever needed.

Signed-off-by: Igor Stoppa <igor.stoppa@xxxxxxxxxx>
---
 include/linux/genalloc.h |   4 +-
 lib/genalloc.c           | 417 ++++++++++++++++++++++++++++++++---------------
 2 files changed, 289 insertions(+), 132 deletions(-)

diff --git a/include/linux/genalloc.h b/include/linux/genalloc.h
index 872f930..dcaa33e 100644
--- a/include/linux/genalloc.h
+++ b/include/linux/genalloc.h
@@ -32,7 +32,7 @@
 
 #include <linux/types.h>
 #include <linux/spinlock_types.h>
-#include <linux/atomic.h>
+#include <linux/slab.h>
 
 struct device;
 struct device_node;
@@ -76,7 +76,7 @@ struct gen_pool_chunk {
 	phys_addr_t phys_addr;		/* physical starting address of memory chunk */
 	unsigned long start_addr;	/* start address of memory chunk */
 	unsigned long end_addr;		/* end address of memory chunk (inclusive) */
-	unsigned long bits[0];		/* bitmap for allocating memory chunk */
+	unsigned long entries[0];	/* bitmap for allocating memory chunk */
 };
 
 /*
diff --git a/lib/genalloc.c b/lib/genalloc.c
index ca06adc..dde7830 100644
--- a/lib/genalloc.c
+++ b/lib/genalloc.c
@@ -36,114 +36,221 @@
 #include <linux/genalloc.h>
 #include <linux/of_device.h>
 
+#define ENTRY_ORDER 1UL
+#define ENTRY_MASK ((1UL << ((ENTRY_ORDER) + 1UL)) - 1UL)
+#define ENTRY_HEAD ENTRY_MASK
+#define ENTRY_UNUSED 0UL
+#define BITS_PER_ENTRY (1U << ENTRY_ORDER)
+#define BITS_DIV_ENTRIES(x) ((x) >> ENTRY_ORDER)
+#define ENTRIES_TO_BITS(x) ((x) << ENTRY_ORDER)
+#define BITS_DIV_LONGS(x) ((x) / BITS_PER_LONG)
+#define ENTRIES_DIV_LONGS(x) (BITS_DIV_LONGS(ENTRIES_TO_BITS(x)))
+
+#define ENTRIES_PER_LONG BITS_DIV_ENTRIES(BITS_PER_LONG)
+
+/* Binary pattern of 1010...1010 that spans one unsigned long. */
+#define MASK (~0UL / 3 * 2)
+
+/**
+ * get_bitmap_entry - extracts the specified entry from the bitmap
+ * @map: pointer to a bitmap
+ * @entry_index: the index of the desired entry in the bitmap
+ *
+ * Returns the requested bitmap.
+ */
+static inline unsigned long get_bitmap_entry(unsigned long *map,
+					    int entry_index)
+{
+	return (map[ENTRIES_DIV_LONGS(entry_index)] >>
+		ENTRIES_TO_BITS(entry_index % ENTRIES_PER_LONG)) &
+		ENTRY_MASK;
+}
+
+
+/**
+ * mem_to_units - convert references to memory into orders of allocation
+ * @size: amount in bytes
+ * @order: pow of 2 represented by each entry in the bitmap
+ *
+ * Returns the number of units representing the size.
+ */
+static inline unsigned long mem_to_units(unsigned long size,
+					 unsigned long order)
+{
+	return (size + (1UL << order) - 1) >> order;
+}
+
+/**
+ * chunk_size - dimension of a chunk of memory
+ * @chunk: pointer to the struct describing the chunk
+ *
+ * Returns the size of the chunk.
+ */
 static inline size_t chunk_size(const struct gen_pool_chunk *chunk)
 {
 	return chunk->end_addr - chunk->start_addr + 1;
 }
 
-static int set_bits_ll(unsigned long *addr, unsigned long mask_to_set)
+
+/**
+ * set_bits_ll - according to the mask, sets the bits specified by
+ * value, at the address specified.
+ * @addr: where to write
+ * @mask: filter to apply for the bits to alter
+ * @value: actual configuration of bits to store
+ *
+ * Returns 0 upon success, -EBUSY otherwise
+ */
+static int set_bits_ll(unsigned long *addr,
+		       unsigned long mask, unsigned long value)
 {
-	unsigned long val, nval;
+	unsigned long nval;
+	unsigned long present;
+	unsigned long target;
 
 	nval = *addr;
 	do {
-		val = nval;
-		if (val & mask_to_set)
+		present = nval;
+		if (present & mask)
 			return -EBUSY;
+		target =  present | value;
 		cpu_relax();
-	} while ((nval = cmpxchg(addr, val, val | mask_to_set)) != val);
-
+	} while ((nval = cmpxchg(addr, present, target)) != target);
 	return 0;
 }
 
-static int clear_bits_ll(unsigned long *addr, unsigned long mask_to_clear)
+
+/**
+ * cleart_bits_ll - according to the mask, clears the bits specified by
+ * value, at the address specified.
+ * @addr: where to write
+ * @mask: filter to apply for the bits to alter
+ * @value: actual configuration of bits to clear
+ *
+ * Returns 0 upon success, -EBUSY otherwise
+ */
+static int clear_bits_ll(unsigned long *addr,
+			 unsigned long mask, unsigned long value)
 {
-	unsigned long val, nval;
+	unsigned long nval;
+	unsigned long present;
+	unsigned long target;
 
 	nval = *addr;
+	present = nval;
+	if (unlikely((present & mask) ^ value))
+		return -EBUSY;
 	do {
-		val = nval;
-		if ((val & mask_to_clear) != mask_to_clear)
+		present = nval;
+		if (unlikely((present & mask) ^ value))
 			return -EBUSY;
+		target =  present & ~mask;
 		cpu_relax();
-	} while ((nval = cmpxchg(addr, val, val & ~mask_to_clear)) != val);
-
+	} while ((nval = cmpxchg(addr, present, target)) != target);
 	return 0;
 }
 
-/*
- * bitmap_set_ll - set the specified number of bits at the specified position
+
+/**
+ * get_boundary - verify that an allocation effectively
+ * starts at the given address, then measure its length.
  * @map: pointer to a bitmap
- * @start: a bit position in @map
- * @nr: number of bits to set
+ * @start_entry: the index of the first entry in the bitmap
+ * @nentries: number of entries to alter
  *
- * Set @nr bits start from @start in @map lock-lessly. Several users
- * can set/clear the same bitmap simultaneously without lock. If two
- * users set the same bit, one user will return remain bits, otherwise
- * return 0.
+ * Returns the length of an allocation, otherwise -EINVAL if the
+ * parameters do not refer to a correct allocation.
  */
-static int bitmap_set_ll(unsigned long *map, int start, int nr)
+static int get_boundary(unsigned long *map, int start_entry, int nentries)
 {
-	unsigned long *p = map + BIT_WORD(start);
-	const int size = start + nr;
-	int bits_to_set = BITS_PER_LONG - (start % BITS_PER_LONG);
-	unsigned long mask_to_set = BITMAP_FIRST_WORD_MASK(start);
-
-	while (nr - bits_to_set >= 0) {
-		if (set_bits_ll(p, mask_to_set))
-			return nr;
-		nr -= bits_to_set;
-		bits_to_set = BITS_PER_LONG;
-		mask_to_set = ~0UL;
-		p++;
-	}
-	if (nr) {
-		mask_to_set &= BITMAP_LAST_WORD_MASK(size);
-		if (set_bits_ll(p, mask_to_set))
-			return nr;
-	}
+	int i;
+	unsigned long bitmap_entry;
 
-	return 0;
+
+	if (unlikely(get_bitmap_entry(map, start_entry) != ENTRY_HEAD))
+		return -EINVAL;
+	for (i = start_entry + 1; i < nentries; i++) {
+		bitmap_entry = get_bitmap_entry(map, i);
+		if (bitmap_entry == ENTRY_HEAD ||
+		    bitmap_entry == ENTRY_UNUSED)
+			return i;
+	}
+	return nentries - start_entry;
 }
 
+
+#define SET_BITS 1
+#define CLEAR_BITS 0
+
 /*
- * bitmap_clear_ll - clear the specified number of bits at the specified position
+ * alter_bitmap_ll - set or clear the entries associated to an allocation
+ * @alteration: selection if the bits selected should be set or cleared
  * @map: pointer to a bitmap
- * @start: a bit position in @map
- * @nr: number of bits to set
+ * @start: the index of the first entry in the bitmap
+ * @nentries: number of entries to alter
  *
- * Clear @nr bits start from @start in @map lock-lessly. Several users
- * can set/clear the same bitmap simultaneously without lock. If two
- * users clear the same bit, one user will return remain bits,
- * otherwise return 0.
+ * The modification happens lock-lessly.
+ * Several users can write to the same map simultaneously, without lock.
+ * If two users alter the same bit, one user will return remaining
+ * entries, otherwise return 0.
  */
-static int bitmap_clear_ll(unsigned long *map, int start, int nr)
+static int alter_bitmap_ll(bool alteration, unsigned long *map,
+			   int start_entry, int nentries)
 {
-	unsigned long *p = map + BIT_WORD(start);
-	const int size = start + nr;
-	int bits_to_clear = BITS_PER_LONG - (start % BITS_PER_LONG);
-	unsigned long mask_to_clear = BITMAP_FIRST_WORD_MASK(start);
-
-	while (nr - bits_to_clear >= 0) {
-		if (clear_bits_ll(p, mask_to_clear))
-			return nr;
-		nr -= bits_to_clear;
-		bits_to_clear = BITS_PER_LONG;
-		mask_to_clear = ~0UL;
-		p++;
-	}
-	if (nr) {
-		mask_to_clear &= BITMAP_LAST_WORD_MASK(size);
-		if (clear_bits_ll(p, mask_to_clear))
-			return nr;
+	unsigned long start_bit;
+	unsigned long end_bit;
+	unsigned long mask;
+	unsigned long value;
+	int nbits;
+	int bits_to_write;
+	int index;
+	int (*action)(unsigned long *addr,
+		      unsigned long mask, unsigned long value);
+
+	action = (alteration == SET_BITS) ? set_bits_ll : clear_bits_ll;
+
+	/* Prepare for writing the initial part of the allocation, from
+	 * starting entry, to the end of the UL bitmap element which
+	 * contains it. It might be larger than the actual allocation.
+	 */
+	start_bit = ENTRIES_TO_BITS(start_entry);
+	end_bit = ENTRIES_TO_BITS(start_entry + nentries);
+	nbits = ENTRIES_TO_BITS(nentries);
+	bits_to_write = BITS_PER_LONG - start_bit % BITS_PER_LONG;
+	mask = BITMAP_FIRST_WORD_MASK(start_bit);
+	/* Mark the beginning of the allocation. */
+	value = MASK | (1UL << (start_bit % BITS_PER_LONG));
+	index =  BITS_DIV_LONGS(start_bit);
+
+	/* Writes entries to the bitmap, as long as the reminder is
+	 * positive or zero.
+	 * Might be skipped if the entries to write do not reach the end
+	 * of a bitmap UL unit.
+	 */
+	while (nbits >= bits_to_write) {
+		if (action(map + index, mask, value & mask))
+			return BITS_DIV_ENTRIES(nbits);
+		nbits -= bits_to_write;
+		bits_to_write = BITS_PER_LONG;
+		mask = ~0UL;
+		value = MASK;
+		index++;
 	}
 
+	/* Takes care of the ending part of the entries to mark. */
+	if (nbits > 0) {
+		mask ^= BITMAP_FIRST_WORD_MASK((end_bit) % BITS_PER_LONG);
+		bits_to_write = nbits;
+		if (action(map + index, mask, value & mask))
+			return BITS_DIV_ENTRIES(nbits);
+	}
 	return 0;
 }
 
+
 /**
  * gen_pool_create - create a new special memory pool
- * @min_alloc_order: log base 2 of number of bytes each bitmap bit represents
+ * @min_alloc_order: log base 2 of number of bytes each bitmap entry represents
  * @nid: node id of the node the pool structure should be allocated on, or -1
  *
  * Create a new special memory pool that can be used to manage special purpose
@@ -183,10 +290,12 @@ int gen_pool_add_virt(struct gen_pool *pool, unsigned long virt, phys_addr_t phy
 		 size_t size, int nid)
 {
 	struct gen_pool_chunk *chunk;
-	int nbits = size >> pool->min_alloc_order;
-	int nbytes = sizeof(struct gen_pool_chunk) +
-				BITS_TO_LONGS(nbits) * sizeof(long);
+	int nentries;
+	int nbytes;
 
+	nentries = size >> pool->min_alloc_order;
+	nbytes = sizeof(struct gen_pool_chunk) +
+		 ENTRIES_DIV_LONGS(nentries) * sizeof(long);
 	chunk = kzalloc_node(nbytes, GFP_KERNEL, nid);
 	if (unlikely(chunk == NULL))
 		return -ENOMEM;
@@ -248,7 +357,7 @@ void gen_pool_destroy(struct gen_pool *pool)
 		list_del(&chunk->next_chunk);
 
 		end_bit = chunk_size(chunk) >> order;
-		bit = find_next_bit(chunk->bits, end_bit, 0);
+		bit = find_next_bit(chunk->entries, end_bit, 0);
 		BUG_ON(bit < end_bit);
 
 		kfree(chunk);
@@ -292,7 +401,7 @@ unsigned long gen_pool_alloc_algo(struct gen_pool *pool, size_t size,
 	struct gen_pool_chunk *chunk;
 	unsigned long addr = 0;
 	int order = pool->min_alloc_order;
-	int nbits, start_bit, end_bit, remain;
+	int nentries, start_entry, end_entry, remain;
 
 #ifndef CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG
 	BUG_ON(in_nmi());
@@ -301,29 +410,32 @@ unsigned long gen_pool_alloc_algo(struct gen_pool *pool, size_t size,
 	if (size == 0)
 		return 0;
 
-	nbits = (size + (1UL << order) - 1) >> order;
+	nentries = mem_to_units(size, order);
 	rcu_read_lock();
 	list_for_each_entry_rcu(chunk, &pool->chunks, next_chunk) {
 		if (size > atomic_long_read(&chunk->avail))
 			continue;
 
-		start_bit = 0;
-		end_bit = chunk_size(chunk) >> order;
+		start_entry = 0;
+		end_entry = chunk_size(chunk) >> order;
 retry:
-		start_bit = algo(chunk->bits, end_bit, start_bit,
-				 nbits, data, pool);
-		if (start_bit >= end_bit)
+		start_entry = algo(chunk->entries, end_entry, start_entry,
+				  nentries, data, pool);
+		if (start_entry >= end_entry)
 			continue;
-		remain = bitmap_set_ll(chunk->bits, start_bit, nbits);
+		remain = alter_bitmap_ll(SET_BITS, chunk->entries,
+					 start_entry, nentries);
 		if (remain) {
-			remain = bitmap_clear_ll(chunk->bits, start_bit,
-						 nbits - remain);
-			BUG_ON(remain);
+			remain = alter_bitmap_ll(CLEAR_BITS,
+						 chunk->entries,
+						 start_entry,
+						 nentries - remain);
 			goto retry;
 		}
 
-		addr = chunk->start_addr + ((unsigned long)start_bit << order);
-		size = nbits << order;
+		addr = chunk->start_addr +
+			((unsigned long)start_entry << order);
+		size = nentries << order;
 		atomic_long_sub(size, &chunk->avail);
 		break;
 	}
@@ -365,7 +477,7 @@ EXPORT_SYMBOL(gen_pool_dma_alloc);
  * gen_pool_free - free allocated special memory back to the pool
  * @pool: pool to free to
  * @addr: starting address of memory to free back to pool
- * @size: size in bytes of memory to free
+ * @size: size in bytes of memory to free or 0, for auto-detection
  *
  * Free previously allocated special memory back to the specified
  * pool.  Can not be used in NMI handler on architectures without
@@ -375,22 +487,29 @@ void gen_pool_free(struct gen_pool *pool, unsigned long addr, size_t size)
 {
 	struct gen_pool_chunk *chunk;
 	int order = pool->min_alloc_order;
-	int start_bit, nbits, remain;
+	int start_entry, remaining_entries, nentries, remain;
+	int boundary;
 
 #ifndef CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG
 	BUG_ON(in_nmi());
 #endif
 
-	nbits = (size + (1UL << order) - 1) >> order;
 	rcu_read_lock();
 	list_for_each_entry_rcu(chunk, &pool->chunks, next_chunk) {
 		if (addr >= chunk->start_addr && addr <= chunk->end_addr) {
 			BUG_ON(addr + size - 1 > chunk->end_addr);
-			start_bit = (addr - chunk->start_addr) >> order;
-			remain = bitmap_clear_ll(chunk->bits, start_bit, nbits);
+			start_entry = (addr - chunk->start_addr) >> order;
+			remaining_entries = (chunk->end_addr - addr) >> order;
+			boundary = get_boundary(chunk->entries, start_entry,
+						remaining_entries);
+			BUG_ON(boundary < 0);
+			nentries = boundary - start_entry;
+			BUG_ON(size &&
+			       (nentries != mem_to_units(size, order)));
+			remain = alter_bitmap_ll(CLEAR_BITS, chunk->entries,
+						 start_entry, nentries);
 			BUG_ON(remain);
-			size = nbits << order;
-			atomic_long_add(size, &chunk->avail);
+			atomic_long_add(nentries << order, &chunk->avail);
 			rcu_read_unlock();
 			return;
 		}
@@ -517,9 +636,9 @@ EXPORT_SYMBOL(gen_pool_set_algo);
  * gen_pool_first_fit - find the first available region
  * of memory matching the size requirement (no alignment constraint)
  * @map: The address to base the search on
- * @size: The bitmap size in bits
- * @start: The bitnumber to start searching at
- * @nr: The number of zeroed bits we're looking for
+ * @size: The number of allocation units in the bitmap
+ * @start: The allocation unit to start searching at
+ * @nr: The number of allocation units we're looking for
  * @data: additional data - unused
  * @pool: pool to find the fit region memory from
  */
@@ -527,7 +646,15 @@ unsigned long gen_pool_first_fit(unsigned long *map, unsigned long size,
 		unsigned long start, unsigned int nr, void *data,
 		struct gen_pool *pool)
 {
-	return bitmap_find_next_zero_area(map, size, start, nr, 0);
+	unsigned long align_mask;
+	unsigned long bit_index;
+
+	align_mask = roundup_pow_of_two(BITS_PER_ENTRY) - 1;
+	bit_index = bitmap_find_next_zero_area(map, ENTRIES_TO_BITS(size),
+					       ENTRIES_TO_BITS(start),
+					       ENTRIES_TO_BITS(nr),
+					       align_mask);
+	return BITS_DIV_ENTRIES(bit_index);
 }
 EXPORT_SYMBOL(gen_pool_first_fit);
 
@@ -535,9 +662,9 @@ EXPORT_SYMBOL(gen_pool_first_fit);
  * gen_pool_first_fit_align - find the first available region
  * of memory matching the size requirement (alignment constraint)
  * @map: The address to base the search on
- * @size: The bitmap size in bits
- * @start: The bitnumber to start searching at
- * @nr: The number of zeroed bits we're looking for
+ * @size: The number of allocation units in the bitmap
+ * @start: The allocation unit to start searching at
+ * @nr: The number of allocation units we're looking for
  * @data: data for alignment
  * @pool: pool to get order from
  */
@@ -547,21 +674,28 @@ unsigned long gen_pool_first_fit_align(unsigned long *map, unsigned long size,
 {
 	struct genpool_data_align *alignment;
 	unsigned long align_mask;
+	unsigned long bit_index;
 	int order;
 
 	alignment = data;
 	order = pool->min_alloc_order;
-	align_mask = ((alignment->align + (1UL << order) - 1) >> order) - 1;
-	return bitmap_find_next_zero_area(map, size, start, nr, align_mask);
+	align_mask = roundup_pow_of_two(
+			ENTRIES_TO_BITS(mem_to_units(alignment->align,
+						     order))) - 1;
+	bit_index = bitmap_find_next_zero_area(map, ENTRIES_TO_BITS(size),
+					       ENTRIES_TO_BITS(start),
+					       ENTRIES_TO_BITS(nr),
+					       align_mask);
+	return BITS_DIV_ENTRIES(bit_index);
 }
 EXPORT_SYMBOL(gen_pool_first_fit_align);
 
 /**
  * gen_pool_fixed_alloc - reserve a specific region
  * @map: The address to base the search on
- * @size: The bitmap size in bits
- * @start: The bitnumber to start searching at
- * @nr: The number of zeroed bits we're looking for
+ * @size: The number of allocation units in the bitmap
+ * @start: The allocation unit to start searching at
+ * @nr: The number of allocation units we're looking for
  * @data: data for alignment
  * @pool: pool to get order from
  */
@@ -571,20 +705,23 @@ unsigned long gen_pool_fixed_alloc(unsigned long *map, unsigned long size,
 {
 	struct genpool_data_fixed *fixed_data;
 	int order;
-	unsigned long offset_bit;
-	unsigned long start_bit;
+	unsigned long offset;
+	unsigned long align_mask;
+	unsigned long bit_index;
 
 	fixed_data = data;
 	order = pool->min_alloc_order;
-	offset_bit = fixed_data->offset >> order;
 	if (WARN_ON(fixed_data->offset & ((1UL << order) - 1)))
 		return size;
+	offset = fixed_data->offset >> order;
+	align_mask = roundup_pow_of_two(BITS_PER_ENTRY) - 1;
+	bit_index = bitmap_find_next_zero_area(map, ENTRIES_TO_BITS(size),
+					       ENTRIES_TO_BITS(start + offset),
+					       ENTRIES_TO_BITS(nr), align_mask);
+	if (bit_index != ENTRIES_TO_BITS(offset))
+		return size;
 
-	start_bit = bitmap_find_next_zero_area(map, size,
-			start + offset_bit, nr, 0);
-	if (start_bit != offset_bit)
-		start_bit = size;
-	return start_bit;
+	return BITS_DIV_ENTRIES(bit_index);
 }
 EXPORT_SYMBOL(gen_pool_fixed_alloc);
 
@@ -593,9 +730,9 @@ EXPORT_SYMBOL(gen_pool_fixed_alloc);
  * of memory matching the size requirement. The region will be aligned
  * to the order of the size specified.
  * @map: The address to base the search on
- * @size: The bitmap size in bits
- * @start: The bitnumber to start searching at
- * @nr: The number of zeroed bits we're looking for
+ * @size: The number of allocation units in the bitmap
+ * @start: The allocation unit to start searching at
+ * @nr: The number of allocation units we're looking for
  * @data: additional data - unused
  * @pool: pool to find the fit region memory from
  */
@@ -603,9 +740,15 @@ unsigned long gen_pool_first_fit_order_align(unsigned long *map,
 		unsigned long size, unsigned long start,
 		unsigned int nr, void *data, struct gen_pool *pool)
 {
-	unsigned long align_mask = roundup_pow_of_two(nr) - 1;
-
-	return bitmap_find_next_zero_area(map, size, start, nr, align_mask);
+	unsigned long align_mask;
+	unsigned long bit_index;
+
+	align_mask = roundup_pow_of_two(ENTRIES_TO_BITS(nr)) - 1;
+	bit_index = bitmap_find_next_zero_area(map, ENTRIES_TO_BITS(size),
+					       ENTRIES_TO_BITS(start),
+					       ENTRIES_TO_BITS(nr),
+					       align_mask);
+	return BITS_DIV_ENTRIES(bit_index);
 }
 EXPORT_SYMBOL(gen_pool_first_fit_order_align);
 
@@ -613,9 +756,9 @@ EXPORT_SYMBOL(gen_pool_first_fit_order_align);
  * gen_pool_best_fit - find the best fitting region of memory
  * macthing the size requirement (no alignment constraint)
  * @map: The address to base the search on
- * @size: The bitmap size in bits
- * @start: The bitnumber to start searching at
- * @nr: The number of zeroed bits we're looking for
+ * @size: The number of allocation units in the bitmap
+ * @start: The allocation unit to start searching at
+ * @nr: The number of allocation units we're looking for
  * @data: additional data - unused
  * @pool: pool to find the fit region memory from
  *
@@ -626,27 +769,41 @@ unsigned long gen_pool_best_fit(unsigned long *map, unsigned long size,
 		unsigned long start, unsigned int nr, void *data,
 		struct gen_pool *pool)
 {
-	unsigned long start_bit = size;
+	unsigned long start_bit = ENTRIES_TO_BITS(size);
 	unsigned long len = size + 1;
 	unsigned long index;
+	unsigned long align_mask;
+	unsigned long bit_index;
 
-	index = bitmap_find_next_zero_area(map, size, start, nr, 0);
+	align_mask = roundup_pow_of_two(BITS_PER_ENTRY) - 1;
+	bit_index = bitmap_find_next_zero_area(map, ENTRIES_TO_BITS(size),
+					       ENTRIES_TO_BITS(start),
+					       ENTRIES_TO_BITS(nr),
+					       align_mask);
+	index = BITS_DIV_ENTRIES(bit_index);
 
 	while (index < size) {
-		int next_bit = find_next_bit(map, size, index + nr);
-		if ((next_bit - index) < len) {
-			len = next_bit - index;
-			start_bit = index;
+		int next_bit;
+
+		next_bit = find_next_bit(map, ENTRIES_TO_BITS(size),
+					 ENTRIES_TO_BITS(index + nr));
+		if ((BITS_DIV_ENTRIES(next_bit) - index) < len) {
+			len = BITS_DIV_ENTRIES(next_bit) - index;
+			start_bit = ENTRIES_TO_BITS(index);
 			if (len == nr)
-				return start_bit;
+				return BITS_DIV_ENTRIES(start_bit);
 		}
-		index = bitmap_find_next_zero_area(map, size,
-						   next_bit + 1, nr, 0);
+		bit_index =
+			bitmap_find_next_zero_area(map,
+						   ENTRIES_TO_BITS(size),
+						   next_bit + 1,
+						   ENTRIES_TO_BITS(nr),
+						   align_mask);
+		index = BITS_DIV_ENTRIES(bit_index);
 	}
 
-	return start_bit;
+	return BITS_DIV_ENTRIES(start_bit);
 }
-EXPORT_SYMBOL(gen_pool_best_fit);
 
 static void devm_gen_pool_release(struct device *dev, void *res)
 {
-- 
2.9.3