Re: [PATCH] pinctrl: qcom: Add irq_enable callback for msm gpio

[Bjorn Andersson]

On Mon 22 Jan 05:03 PST 2018, Srinivas Ramana wrote:
> +static void msm_gpio_irq_enable(struct irq_data *d)
> +{
> +	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> +	struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
> +	const struct msm_pingroup *g;
> +	unsigned long flags;
> +	u32 val;
> +
> +	g = &pctrl->soc->groups[d->hwirq];
> +
> +	raw_spin_lock_irqsave(&pctrl->lock, flags);
> +
> +	/*
> +	 * clear the interrupt status bit before unmask to avoid
> +	 * any erroneous interrupts that would have got latched
> +	 * when the intterupt is not in use.
> +	 */
> +	val = readl(pctrl->regs + g->intr_status_reg);
> +	val &= ~BIT(g->intr_status_bit);
> +	writel(val, pctrl->regs + g->intr_status_reg);
> +
> +	val = readl(pctrl->regs + g->intr_cfg_reg);
> +	val |= BIT(g->intr_enable_bit);
> +	writel(val, pctrl->regs + g->intr_cfg_reg);
> +
> +	set_bit(d->hwirq, pctrl->enabled_irqs);
> +
> +	raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> +}


Hi Srinivas,

This makes sense, but I would prefer if you extract this code into a
common:

static void __msm_gpio_irq_unmask(struct msm_pinctrl *pctrl, bool status_clear)

which you call from the two callbacks.

Regards,
Bjorn