Re: [PATCH 05/15] ARM: dts: ipq4019: Add ipq4019-ap-dk01-c2 board file

[Sricharan R]

Hi Abhishek,

On 2/3/2018 4:25 PM, Abhishek Sahu wrote:
> On 2018-01-29 10:41, Sricharan R wrote:
>> The board has a spi-nand interface on spi0 bus chipselect1.
>>
>> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
>> ---
>> Âarch/arm/boot/dts/MakefileÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |Â 1 +
>> Âarch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts | 25
>> +++++++++++++++++++++++++
>> Â2 files changed, 26 insertions(+)
>> Âcreate mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index d0381e9..21ed56d 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -724,6 +724,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
>> ÂÂÂÂ qcom-apq8084-ifc6540.dtb \
>> ÂÂÂÂ qcom-apq8084-mtp.dtb \
>> ÂÂÂÂ qcom-ipq4019-ap.dk01.1-c1.dtb \
>> +ÂÂÂ qcom-ipq4019-ap.dk01.1-c2.dtb \
>> ÂÂÂÂ qcom-ipq8064-ap148.dtb \
>> ÂÂÂÂ qcom-msm8660-surf.dtb \
>> ÂÂÂÂ qcom-msm8960-cdp.dtb \
>> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts
>> b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts
>> new file mode 100644
>> index 0000000..e3442da
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts
>> @@ -0,0 +1,25 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Copyright (c) 2017, The Linux Foundation. All rights reserved.
>> +
>> +#include "qcom-ipq4019-ap.dk01.1.dtsi"
>> +
>> +/ {
>> +ÂÂÂ model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C2";
> 
> Âs/IPQ40xx/IPQ4019
> 
 ok

>> +
>> +ÂÂÂ soc {
>> +ÂÂÂÂÂÂÂ spi_0: spi@78b5000 { /* BLSP1 QUP1 */
>> +ÂÂÂÂÂÂÂÂÂÂÂ status = "ok";
>> +ÂÂÂÂÂÂÂÂÂÂÂ cs-gpios = <&tlmm 54 0>, <&tlmm 59 0>;
> 
> Âthe base dk01 file has pinmux for 54 only.
> Âfor 59 pin, we need to add pinmux entry also.
> 

 ok. btw, infact think that 59 should be removed.

Regards,
 Sricharan

-- 
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation