Re: [PATCH] [RESEND] x86/smpboot: avoid warning messages while hot-removing physical cpu

[YASUAKI ISHIMATSU]

CC:+Andi Kleen

Hi Masayoshi,

This issue is caused by the following commit:

commit 30bb9811856f667042e746d8033883b1091a46ce
Author: Andi Kleen <ak@xxxxxxxxxxxxxxx>
Date:   Tue Nov 14 07:42:56 2017 -0500

    x86/topology: Avoid wasting 128k for package id array

So you should add the following "Fixes:" tag in the description.

Fixes: 30bb9811856f ("x86/topology: Avoid wasting 128k for package id array")

Thanks,
Yasuaki Ishimatsu

On 02/05/2018 10:51 PM, Masayoshi Mizuma wrote:
> From: Masayoshi Mizuma <m.mizuma@xxxxxxxxxxxxxx>
> 
> When a physical cpu is hot-removed, the following warning message
> are shown while the uncore device is removing in uncore_pci_remove().
> 
> WARNING: CPU: 120 PID: 5 at arch/x86/events/intel/uncore.c:988
> uncore_pci_remove+0xf1/0x110
> ...
> CPU: 120 PID: 5 Comm: kworker/u1024:0 Not tainted 4.15.0-rc8 #1
> Workqueue: kacpi_hotplug acpi_hotplug_work_fn
> ...
> Call Trace:
> pci_device_remove+0x36/0xb0
> device_release_driver_internal+0x145/0x210
> pci_stop_bus_device+0x76/0xa0
> pci_stop_root_bus+0x44/0x60
> acpi_pci_root_remove+0x1f/0x80
> acpi_bus_trim+0x54/0x90
> acpi_bus_trim+0x2e/0x90
> acpi_device_hotplug+0x2bc/0x4b0
> acpi_hotplug_work_fn+0x1a/0x30
> process_one_work+0x141/0x340
> worker_thread+0x47/0x3e0
> kthread+0xf5/0x130
> 
> When uncore_pci_remove() runs, it tries to get package id to
> clear the value of uncore_extra_pci_dev[].dev[] by using
> topology_phys_to_logical_pkg(). The warning messesage are
> shown because topology_phys_to_logical_pkg() returns -1.
> 
>   arch/x86/events/intel/uncore.c:
>   static void uncore_pci_remove(struct pci_dev *pdev)
>   {
>   ...
>           phys_id = uncore_pcibus_to_physid(pdev->bus);
>   ...
>                   pkg = topology_phys_to_logical_pkg(phys_id); //returns -1
>                   for (i = 0; i < UNCORE_EXTRA_PCI_DEV_MAX; i++) {
>                           if (uncore_extra_pci_dev[pkg].dev[i] == pdev) {
>                                   uncore_extra_pci_dev[pkg].dev[i] = NULL;
>                                   break;
>                           }
>                   }
>                   WARN_ON_ONCE(i >= UNCORE_EXTRA_PCI_DEV_MAX); //HERE!!
> 
> topology_phys_to_logical_pkg() tries to find
> cpuinfo_x86->phys_proc_id that matches the phys_pkg argument.
> 
>   arch/x86/kernel/smpboot.c:
>   int topology_phys_to_logical_pkg(unsigned int phys_pkg)
>   {
>           int cpu;
>   
>           for_each_possible_cpu(cpu) {
>                   struct cpuinfo_x86 *c = &cpu_data(cpu);
>   
>                   if (c->initialized && c->phys_proc_id == phys_pkg)
>                           return c->logical_proc_id;
>           }
>           return -1;
>   }
> 
> However, the phys_proc_id is already set to 0 by remove_siblinginfo()
> when the cpu was offlined.
> So, topology_phys_to_logical_pkg() cannot find correct the
> logical_proc_id and always returns -1.
> As the result, uncore_pci_remove() calls WARN_ON_ONCE() and the warning
> messages are shown.
> 
> To avoid this, remove the setting from remove_siblinginfo().
> There is no influence about the removing because phys_proc_id is not
> used after it is hot-removed and it is re-set while hot-addeding.
> 
> Signed-off-by: Masayoshi Mizuma <m.mizuma@xxxxxxxxxxxxxx>
>  
> ---
>  arch/x86/kernel/smpboot.c | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
> index ed556d5..844279c 100644
> --- a/arch/x86/kernel/smpboot.c
> +++ b/arch/x86/kernel/smpboot.c
> @@ -1431,7 +1431,6 @@ static void remove_siblinginfo(int cpu)
>  	cpumask_clear(cpu_llc_shared_mask(cpu));
>  	cpumask_clear(topology_sibling_cpumask(cpu));
>  	cpumask_clear(topology_core_cpumask(cpu));
> -	c->phys_proc_id = 0;
>  	c->cpu_core_id = 0;
>  	cpumask_clear_cpu(cpu, cpu_sibling_setup_mask);
>  	recompute_smt_state();
>