[PATCH v2 0/2] drivers/qcom: add Command DB support

From: Lina Iyer
Date: Thu Feb 08 2018 - 14:52:15 EST


Changes in [v2]:
- Use reserved memory regions instead of regs in DT
- Code cleanup suggested by Bjorn and Stephen
- Remove unused structures and functions.
- Update function names from _get_ to _read_
- Add documentation

These patches add support for reading a shared memory database in the newer
QCOM SoCs called Command DB. With the new architecture on SDM845, shared
resources like clocks, regulators etc., have dynamic properties. These
properties may change based on external components, board configurations or
available feature set. A remote processor detects these parameters and fills up
the database with the resource and available state information. Platform
drivers that need these shared resources will need to query this database to
get the address and properties and vote for the state.

The information in the database is static. The database is read-only memory
location that is available for Linux. A pre-defined string is used as a key into
an entry in the database. Generally, platform drivers query the database only
at init to get the information they need.

[v1]: https://www.spinics.net/lists/linux-arm-msm/msg32462.html

Lina Iyer (2):
drivers: qcom: add command DB driver
dt-bindings: introduce Command DB for QCOM SoCs

.../devicetree/bindings/arm/msm/cmd-db.txt | 38 +++
drivers/soc/qcom/Kconfig | 9 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/cmd-db.c | 321 +++++++++++++++++++++
include/soc/qcom/cmd-db.h | 50 ++++
5 files changed, 419 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/msm/cmd-db.txt
create mode 100644 drivers/soc/qcom/cmd-db.c
create mode 100644 include/soc/qcom/cmd-db.h

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project