[PATCH v3 4/4] powerpc: wii.dts: Add GPIO line names
From: Jonathan NeuschÃfer
Date: Fri Feb 09 2018 - 07:08:18 EST
These are the GPIO line names on a Nintendo Wii, as documented in:
https://wiibrew.org/wiki/Hardware/Hollywood_GPIOs
Signed-off-by: Jonathan NeuschÃfer <j.neuschaefer@xxxxxxx>
---
v2, v3:
- no change
---
arch/powerpc/boot/dts/wii.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/powerpc/boot/dts/wii.dts b/arch/powerpc/boot/dts/wii.dts
index 7235e375919c..07d5e84e98b1 100644
--- a/arch/powerpc/boot/dts/wii.dts
+++ b/arch/powerpc/boot/dts/wii.dts
@@ -178,6 +178,14 @@
gpio-controller;
ngpios = <24>;
+ gpio-line-names =
+ "POWER", "SHUTDOWN", "FAN", "DC_DC",
+ "DI_SPIN", "SLOT_LED", "EJECT_BTN", "SLOT_IN",
+ "SENSOR_BAR", "DO_EJECT", "EEP_CS", "EEP_CLK",
+ "EEP_MOSI", "EEP_MISO", "AVE_SCL", "AVE_SDA",
+ "DEBUG0", "DEBUG1", "DEBUG2", "DEBUG3",
+ "DEBUG4", "DEBUG5", "DEBUG6", "DEBUG7";
+
/*
* This is commented out while a standard binding
* for i2c over gpio is defined.
--
2.15.1