Re: [PATCH v13 4/4] RFC: fw_cfg: do DMA read operation

[Michael S. Tsirkin]

On Wed, Feb 07, 2018 at 02:35:25AM +0100, Marc-André Lureau wrote:
> Modify fw_cfg_read_blob() to use DMA if the device supports it.
> Return errors, because the operation may fail.
> 
> So far, only one call in fw_cfg_register_dir_entries() is using
> kmalloc'ed buf and is thus clearly eligible to DMA read.
> 
> Initially, I didn't implement DMA read to speed up boot time, but as a
> first step before introducing DMA write (since read operations were
> already presents). Even more, I didn't realize fw-cfg entries were
> being read by the kernel during boot by default. But actally fw-cfg
> entries are being populated during module probe. I knew DMA improved a
> lot bios boot time (the main reason the DMA interface was added
> afaik). Let see the time it would take to read the whole ACPI
> tables (128kb allocated)
> 
>  # time cat /sys/firmware/qemu_fw_cfg/by_name/etc/acpi/tables/raw
>   - with DMA: sys 0m0.003s
>   - without DMA (-global fw_cfg.dma_enabled=off): sys 0m7.674s
> 
> FW_CFG_FILE_DIR (0x19) is the only "file" that is read during kernel
> boot to populate sysfs qemu_fw_cfg directory, and it is quite
> small (1-2kb). Since it does not expose itself, in order to measure
> the time it takes to read such small file, I took a comparable sized
> file of 2048 bytes and exposed it (-fw_cfg test,file=file with a
> modified read_raw enabling DMA)
> 
>  # perf stat -r 100 cat /sys/firmware/qemu_fw_cfg/by_name/test/raw >/dev/null
>   - with DMA:
>           0.636037      task-clock (msec)         #    0.141 CPUs utilized            ( +-  1.19% )
>   - without DMA:
>           6.430128      task-clock (msec)         #    0.622 CPUs utilized            ( +-  0.22% )
> 
> That's a few msec saved during boot by enabling DMA read (the gain
> would be more substantial if other & bigger fw-cfg entries are read by
> others from sysfs, unfortunately, it's not clear if we can always
> enable DMA there)
> 
> Signed-off-by: Marc-André Lureau <marcandre.lureau@xxxxxxxxxx>
> ---
>  drivers/firmware/qemu_fw_cfg.c | 47 ++++++++++++++++++++++++++++++------------
>  1 file changed, 34 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/firmware/qemu_fw_cfg.c b/drivers/firmware/qemu_fw_cfg.c
> index fd576ba7b337..3721dc868a2b 100644
> --- a/drivers/firmware/qemu_fw_cfg.c
> +++ b/drivers/firmware/qemu_fw_cfg.c
> @@ -150,11 +150,13 @@ static ssize_t fw_cfg_dma_transfer(void *address, u32 length, u32 control)
>  }
>  
>  /* read chunk of given fw_cfg blob (caller responsible for sanity-check) */
> -static inline void fw_cfg_read_blob(u16 key,
> -				    void *buf, loff_t pos, size_t count)
> +static ssize_t fw_cfg_read_blob(u16 key,
> +				void *buf, loff_t pos, size_t count,
> +				bool dma)
>  {
>  	u32 glk = -1U;
>  	acpi_status status;
> +	ssize_t ret = count;
>  
>  	/* If we have ACPI, ensure mutual exclusion against any potential
>  	 * device access by the firmware, e.g. via AML methods:
> @@ -164,17 +166,36 @@ static inline void fw_cfg_read_blob(u16 key,
>  		/* Should never get here */
>  		WARN(1, "fw_cfg_read_blob: Failed to lock ACPI!\n");
>  		memset(buf, 0, count);
> -		return;
> +		return -EINVAL;
>  	}
>  
>  	mutex_lock(&fw_cfg_dev_lock);
> -	iowrite16(fw_cfg_sel_endianness(key), fw_cfg_reg_ctrl);
> -	while (pos-- > 0)
> -		ioread8(fw_cfg_reg_data);
> -	ioread8_rep(fw_cfg_reg_data, buf, count);
> +	if (dma && fw_cfg_dma_enabled()) {
> +		if (pos == 0) {
> +			ret = fw_cfg_dma_transfer(buf, count, key << 16
> +						  | FW_CFG_DMA_CTL_SELECT
> +						  | FW_CFG_DMA_CTL_READ);
> +		} else {
> +			iowrite16(fw_cfg_sel_endianness(key), fw_cfg_reg_ctrl);
> +			ret = fw_cfg_dma_transfer(NULL, pos, FW_CFG_DMA_CTL_SKIP);
> +			if (ret < 0)
> +				goto end;
> +			ret = fw_cfg_dma_transfer(buf, count,
> +						  FW_CFG_DMA_CTL_READ);
> +		}
> +	} else {
> +		iowrite16(fw_cfg_sel_endianness(key), fw_cfg_reg_ctrl);
> +		while (pos-- > 0)
> +			ioread8(fw_cfg_reg_data);
> +		ioread8_rep(fw_cfg_reg_data, buf, count);
> +	}
> +
> +end:
>  	mutex_unlock(&fw_cfg_dev_lock);
>  
>  	acpi_release_global_lock(glk);
> +
> +	return ret;
>  }
>  

These two functions share no common code at all.
Pls name the dma one fw_cfg_dma_read or something like this,
cleaner than a flag.

>  #ifdef CONFIG_CRASH_CORE
> @@ -307,7 +328,7 @@ static int fw_cfg_do_platform_probe(struct platform_device *pdev)
>  #endif
>  
>  	/* verify fw_cfg device signature */
> -	fw_cfg_read_blob(FW_CFG_SIGNATURE, sig, 0, FW_CFG_SIG_SIZE);
> +	fw_cfg_read_blob(FW_CFG_SIGNATURE, sig, 0, FW_CFG_SIG_SIZE, false);
>  	if (memcmp(sig, "QEMU", FW_CFG_SIG_SIZE) != 0) {
>  		fw_cfg_io_cleanup();
>  		return -ENODEV;

BTW it looks like fw_cfg_read_blob can fail and that failure isn't
handled properly here.

> @@ -494,8 +515,8 @@ static ssize_t fw_cfg_sysfs_read_raw(struct file *filp, struct kobject *kobj,
>  	if (count > entry->f.size - pos)
>  		count = entry->f.size - pos;
>  
> -	fw_cfg_read_blob(entry->f.select, buf, pos, count);
> -	return count;
> +	/* do not use DMA, virt_to_phys(buf) might not be ok */
> +	return fw_cfg_read_blob(entry->f.select, buf, pos, count, false);
>  }
>  
>  static struct bin_attribute fw_cfg_sysfs_attr_raw = {
> @@ -656,7 +677,7 @@ static int fw_cfg_register_dir_entries(void)
>  	struct fw_cfg_file *dir;
>  	size_t dir_size;
>  
> -	fw_cfg_read_blob(FW_CFG_FILE_DIR, &count, 0, sizeof(count));
> +	fw_cfg_read_blob(FW_CFG_FILE_DIR, &count, 0, sizeof(count), false);
>  	count = be32_to_cpu(count);
>  	dir_size = count * sizeof(struct fw_cfg_file);
>  
> @@ -664,7 +685,7 @@ static int fw_cfg_register_dir_entries(void)
>  	if (!dir)
>  		return -ENOMEM;
>  
> -	fw_cfg_read_blob(FW_CFG_FILE_DIR, dir, sizeof(count), dir_size);
> +	fw_cfg_read_blob(FW_CFG_FILE_DIR, dir, sizeof(count), dir_size, true);
>  
>  	for (i = 0; i < count; i++) {
>  		dir[i].size = be32_to_cpu(dir[i].size);
> @@ -713,7 +734,7 @@ static int fw_cfg_sysfs_probe(struct platform_device *pdev)
>  		goto err_probe;
>  
>  	/* get revision number, add matching top-level attribute */
> -	fw_cfg_read_blob(FW_CFG_ID, &fw_cfg_rev, 0, sizeof(fw_cfg_rev));
> +	fw_cfg_read_blob(FW_CFG_ID, &fw_cfg_rev, 0, sizeof(fw_cfg_rev), false);
>  	fw_cfg_rev = le32_to_cpu(fw_cfg_rev);
>  	err = sysfs_create_file(fw_cfg_top_ko, &fw_cfg_rev_attr.attr);
>  	if (err)
> -- 
> 2.16.1.73.g5832b7e9f2