[PATCH 11/21] regulator: max8952: Pass descriptor instead of GPIO number

From: Linus Walleij
Date: Mon Feb 12 2018 - 08:20:35 EST


Instead of passing a global GPIO number for the enable GPIO, pass
a descriptor looked up with the standard devm_gpiod_get_optional()
call.

All users of this regulator use device tree so the transition is
pretty smooth.

Cc: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/regulator/max8952.c | 18 +++++++++++++-----
include/linux/regulator/max8952.h | 1 -
2 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c
index 1096546c05e9..f1e77ed5dfec 100644
--- a/drivers/regulator/max8952.c
+++ b/drivers/regulator/max8952.c
@@ -27,6 +27,7 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/max8952.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
@@ -148,7 +149,6 @@ static struct max8952_platform_data *max8952_parse_dt(struct device *dev)

pd->gpio_vid0 = of_get_named_gpio(np, "max8952,vid-gpios", 0);
pd->gpio_vid1 = of_get_named_gpio(np, "max8952,vid-gpios", 1);
- pd->gpio_en = of_get_named_gpio(np, "max8952,en-gpio", 0);

if (of_property_read_u32(np, "max8952,default-mode", &pd->default_mode))
dev_warn(dev, "Default mode not specified, assuming 0\n");
@@ -197,6 +197,8 @@ static int max8952_pmic_probe(struct i2c_client *client,
struct regulator_config config = { };
struct max8952_data *max8952;
struct regulator_dev *rdev;
+ struct gpio_desc *gpiod;
+ enum gpiod_flags gflags;

int ret = 0, err = 0;

@@ -224,11 +226,17 @@ static int max8952_pmic_probe(struct i2c_client *client,
config.driver_data = max8952;
config.of_node = client->dev.of_node;

- config.ena_gpio = pdata->gpio_en;
- if (client->dev.of_node)
- config.ena_gpio_initialized = true;
if (pdata->reg_data->constraints.boot_on)
- config.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+ gflags = GPIOD_OUT_HIGH;
+ else
+ gflags = GPIOD_OUT_LOW;
+ gpiod = devm_gpiod_get_optional(&client->dev,
+ "max8952,en",
+ gflags);
+ if (IS_ERR(gpiod))
+ return PTR_ERR(gpiod);
+ if (gpiod)
+ config.ena_gpiod = gpiod;

rdev = devm_regulator_register(&client->dev, &regulator, &config);
if (IS_ERR(rdev)) {
diff --git a/include/linux/regulator/max8952.h b/include/linux/regulator/max8952.h
index 4dbb63a1d4ab..686c42c041b5 100644
--- a/include/linux/regulator/max8952.h
+++ b/include/linux/regulator/max8952.h
@@ -120,7 +120,6 @@ enum {
struct max8952_platform_data {
int gpio_vid0;
int gpio_vid1;
- int gpio_en;

u32 default_mode;
u32 dvs_mode[MAX8952_NUM_DVS_MODE]; /* MAX8952_DVS_MODEx_XXXXmV */
--
2.14.3