[PATCH v2 03/19] clk: meson: only one loop index is necessary in probe
From: Jerome Brunet
Date: Mon Feb 12 2018 - 10:06:48 EST
We don't need several loop index variables in the probe function
This is far from being critical but since we are doing a vast
rework of meson clock controllers, now is the time to lower the
entropy a bit
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
drivers/clk/meson/axg.c | 8 ++++----
drivers/clk/meson/gxbb.c | 13 ++++++-------
drivers/clk/meson/meson8b.c | 8 ++++----
3 files changed, 14 insertions(+), 15 deletions(-)
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
index e16d53b6be30..3bb77b4f1e8d 100644
--- a/drivers/clk/meson/axg.c
+++ b/drivers/clk/meson/axg.c
@@ -802,7 +802,7 @@ static int axg_clkc_probe(struct platform_device *pdev)
const struct clkc_data *clkc_data;
struct resource *res;
void __iomem *clk_base;
- int ret, clkid, i;
+ int ret, i;
clkc_data = of_device_get_match_data(dev);
if (!clkc_data)
@@ -841,13 +841,13 @@ static int axg_clkc_probe(struct platform_device *pdev)
clkc_data->clk_dividers[i]->reg = clk_base +
(u64)clkc_data->clk_dividers[i]->reg;
- for (clkid = 0; clkid < clkc_data->hw_onecell_data->num; clkid++) {
+ for (i = 0; i < clkc_data->hw_onecell_data->num; i++) {
/* array might be sparse */
- if (!clkc_data->hw_onecell_data->hws[clkid])
+ if (!clkc_data->hw_onecell_data->hws[i])
continue;
ret = devm_clk_hw_register(dev,
- clkc_data->hw_onecell_data->hws[clkid]);
+ clkc_data->hw_onecell_data->hws[i]);
if (ret) {
dev_err(dev, "Clock registration failed\n");
return ret;
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 17f44ac751b3..e6adab49c0ba 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -1947,7 +1947,7 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
{
const struct clkc_data *clkc_data;
void __iomem *clk_base;
- int ret, clkid, i;
+ int ret, i;
struct device *dev = &pdev->dev;
clkc_data = of_device_get_match_data(dev);
@@ -1988,16 +1988,15 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
for (i = 0; i < clkc_data->clk_audio_dividers_count; i++)
clkc_data->clk_audio_dividers[i]->base = clk_base;
- /*
- * register all clks
- */
- for (clkid = 0; clkid < clkc_data->hw_onecell_data->num; clkid++) {
+
+ /* Register all clks */
+ for (i = 0; i < clkc_data->hw_onecell_data->num; i++) {
/* array might be sparse */
- if (!clkc_data->hw_onecell_data->hws[clkid])
+ if (!clkc_data->hw_onecell_data->hws[i])
continue;
ret = devm_clk_hw_register(dev,
- clkc_data->hw_onecell_data->hws[clkid]);
+ clkc_data->hw_onecell_data->hws[i]);
if (ret)
goto iounmap;
}
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index abac079ff77f..ffadad27375e 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -806,7 +806,7 @@ static const struct reset_control_ops meson8b_clk_reset_ops = {
static int meson8b_clkc_probe(struct platform_device *pdev)
{
- int ret, clkid, i;
+ int ret, i;
struct clk_hw *parent_hw;
struct clk *parent_clk;
struct device *dev = &pdev->dev;
@@ -844,13 +844,13 @@ static int meson8b_clkc_probe(struct platform_device *pdev)
* register all clks
* CLKID_UNUSED = 0, so skip it and start with CLKID_XTAL = 1
*/
- for (clkid = CLKID_XTAL; clkid < CLK_NR_CLKS; clkid++) {
+ for (i = CLKID_XTAL; i < CLK_NR_CLKS; i++) {
/* array might be sparse */
- if (!meson8b_hw_onecell_data.hws[clkid])
+ if (!meson8b_hw_onecell_data.hws[i])
continue;
/* FIXME convert to devm_clk_register */
- ret = devm_clk_hw_register(dev, meson8b_hw_onecell_data.hws[clkid]);
+ ret = devm_clk_hw_register(dev, meson8b_hw_onecell_data.hws[i]);
if (ret)
return ret;
}
--
2.14.3