Re: [PATCH v3 0/9] irqchip: stm32: add stm32h7 support

[Alexandre Torgue]

Hi

On 11/06/2017 06:03 PM, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre@xxxxxx>
>
> This series adds:
> -Management of multi-bank of external interrupts
> stm32h7 has up to 96 inputs (3 banks of  32 inputs).
> -Fix initial value after cold/hot boot (wakeup issue).
>
> Changes v3:
> -remove chip.name and handler, already done by
> irq_alloc_domain_generic_chips
> -add Rob ack in dt-bindings commit
>
> Changes v2:
> -Remove irq_mask and adds const on struct stm32_exti_bank
> -Add wrapper functions pending and ack
> -Replace BITS_PER_LONG by IRQS_PER_BANK
> -Fill commit message on
> "ARM: dts: stm32: add support of exti on stm32h743"
> -Add system config bank for stm32h7
>
> Ludovic Barre (9):
>    irqchip: stm32: select GENERIC_IRQ_CHIP
>    irqchip: stm32: add multi-bank management
>    dt-bindings: interrupt-controllers: add compatible string for stm32h7
>    irqchip: stm32: add stm32h7 support
>    irqchip: stm32: fix initial values
>    irqchip: stm32: move the wakeup on interrupt mask
>    ARM: dts: stm32: add exti support for stm32h743
>    ARM: dts: stm32: add system config bank node for stm32h743
>    ARM: dts: stm32: add support of exti on stm32h743 pinctrl

patches 7/8/9 (DT part) applied on stm32-next.

Thanks
Alex

>   .../interrupt-controller/st,stm32-exti.txt         |   4 +-
>   arch/arm/boot/dts/stm32h743-pinctrl.dtsi           |  24 +++
>   arch/arm/boot/dts/stm32h743.dtsi                   |  13 ++
>   drivers/irqchip/Kconfig                            |   1 +
>   drivers/irqchip/irq-stm32-exti.c                   | 206 ++++++++++++++++-----
>   5 files changed, 198 insertions(+), 50 deletions(-)